Alcatel OT-282 Quick Start Manual

English - CJB24A0ALAAA
282
Quick Start Guide
For more information about how to use the phone, please go to www.alcatelonetouch.com to download complete user manual (English version only). From the website you can also consult the FAQ (English version only).
1
www.sar-tick.com
This product meets applicable national SAR limits of 2.0 W/kg. The specific maximum SAR values can be found on page 29 of this user guide.
When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 1.5 cm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call.
Your mobile1 ........................
q Send key w End key e OK key r Up/Down t Voicemail
(long keypress)
e
q
r
w
t
Prolonged exposure to music at full volume
on the music player may damage the listener's hearing. Set your phone volume safely. Use only headphones recommended by TCT Mobile Limited and its affiliates.
2 3
keys1.1
Key:
a
y
u
y Volume key u FM Radio i To r c h
Switch on/off
o Lock key
Switch locked/unlocked
a SOS key
Access SOS
4 5
i
o
Key: Send call
Key: Switch on/Switch off the telephone
Key:
Navigation (up/down) Confirm an option (OK key) In idle screen: Enter main menu (OK key)
Confirm a selection In idle screen: Access call log (short keypress)
(long keypress) End call Return to idle screen In idle screen: Access contacts (short keypress) In edit mode: Delete character
Dial a voicemail number (long keypress)
Key:
Key:
Key:
6 7
In idle screen: Input 0 (short keypress) Input '+'/'P'/'W' (long keypress) In edit mode: Input space (short keypress)
In idle screen: Access pre-set number (Son's phone number) (long keypress) Input * (short keypress) In edit mode: Change input mode
In idle screen: Access pre-set number (Daughter's phone number) (long keypress) Input # (short keypress) In edit mode: Change symbol
Idle screen icons1.2
Battery charge level.
Vibration alert: your phone vibrates, but doesn't
ring or beep.
Headset connected.
Call forwarding activated: your calls are
forwarded.
Alarm clock programmed.
Voicemail message received.
FM radio is on.
Unanswered calls.
Roaming.
Level of network reception.
Light only: your phone neither rings, beeps nor
vibrates.
Message unread.
Keypad locked.
Ringtone alert.
8 9
Getting started2 ..................
Set up your phone2.1
q Remove the back cover
w Insert the SIM Card
e Install the battery
Remove the battery
r Attach the back cover
Remove the SIM Card
10 11
Charging the battery
Standard charger
(EUP)
Universal
charger
(1)
Connect the battery charger to your phone and mains socket respectively.
The mains socket must be near to the phone and easily accessible (avoid electric extension cables).
When using your telephone for the first time, charge the battery fully (approximately 3 hours). You are advised to fully charge the battery ( ).
To reduce power consumption and energy waste, when the battery is fully charged, disconnect your charger from the plug; reduce the backlight time, etc.
The charge is complete when the animation
stops.
You can also put your phone in cradle
for charging. Once the light is blue, the battery starts charging.
Power on your phone2.2
Hold down the key until the phone powers on. The charging may take about 20 minutes to start if the battery is flat.
Be careful not to force the plug into the socket.
Power off your phone2.3
Hold down the key from the idle screen. Make sure the battery is correctly inserted before
connecting the charger.
(1)
Depending on your country.
12 13
Loading...
+ 16 hidden pages