Page 1
ALCATELLUCENT
OMNISWITCH 645010
GIGABIT ETHERNET LAN SWITCH
The Alcatel-Lucent OmniSwitch® 6450 Stackable Gigabit Ethernet LAN value switch family
includes a series of 10-port models (non-PoE, Power over Ethernet [PoE], Fast and Gigabit
Ethernet) for classroom, workgroup and small enterprise segments. Designed with an optimized
size, low-power consumption, fan-less and fan models and a rich software feature set, the
OmniSwitch 6450-10 models provide a highly available, self-protective, easily managed
and eco-friendly collocation solution.
OmniSwitch 6450-P10S
OS6450-10L/10/10M
OmniSwitch 6450-P10L/P10
Service providers offering managed
services have the option to install the
Metro services license enabling a set of
Metro Ethernet features. This allows the
OmniSwitch 6450-10 port models to be
quickly integrated into the provider’s
network as advanced customer premise
equipment (CPE) devices. The OS6450P10S is especially designed
for small cell access point deployments
requiring higher PoE power and precision
network timing.
The Alcatel-Lucent OmniSwitch 6450-10
models use the latest technologies and
Alcatel-Lucent Operating System (AOS)
innovations.
Solutions benefiting from the OmniSwitch
6450-10 switches are:
• Classroom and workgroup networks
• Small enterprise or branch office networks
• Commercial and residential managed
services
• Service Provider networks deployments
ALCATELLUCENT OMNISWITCH
645010
The Alcatel-Lucent OmniSwitch 645010 offers eight user ports for smaller
network environments. These models are
power and acoustically optimized, with
a half-rack width (8.5 in./21.59 cm), and
have a fixed configuration chassis in a 1
RU form factor. All models are fan-less
(except –P10S) and have an internal power
supply. The –P10L/-P10 PoE models are
both IEEE 802.3af/802.3at compliant with
a 115 W power budget for PoE attached
devices. The P10S PoE model supports
IEEE 802.3af/802.3at, and is compliant
the PoE section of the PoH (Power over
HDBase-T over four pair) standard with
a 280W power budget for PoE attached
devices.
The OmniSwitch 6450-10L/P10L models
have the user port speeds fixed for
10/100M operation. These models are
upgradeable to gigabit speeds in the
future using the OS6450-10L-UPGD
license upgrade.
Page 2
Table 1. OmniSwitch 6450-10 model configurations
CHASSIS 10/100 PORTS 10/100/
1000 PORTS
Non-PoE models
OS6450-10L 8 0 2 2 Internal AC N/A
OS6450-10/10M 0 8 2 2 Internal AC N/A
PoE models
OS6450-P10L 8 0 2 2 Internal AC N/A
OS6450-P10 0 8 2 2 Internal AC N/A
OS6450-P10S 0 8 0 2 Internal AC N/A
GIG COMBO PORTS SFP UPLINK
GIGABIT SFP
STACKING
5 GB/S*
POWER SUPPLY
SUPPORTED
BACKUP
POWER SUPPLY
SUPPORTED
Port information:
• RJ-45 combo port configurable to be RJ10/100/1000Base-T
• SFP combo port supporting 100/1000Base-X transceivers for short, long and very long distances
• SFP fixed fiber interfaces support only gigabit SFP transceivers or SFP stacking cable.
• All P10S ports support 1588v2 Transparent Clock and is a non-stackable switch
TECHNICAL SPECIFICATIONS
PORT OS645010L OS645010/10M OS6450P10L OS6450P10 OS6450P10S*
RJ-45 10/100 ports 8 0 8 0 0
RJ-45 10/100/1000 ports 0 8 0 8 8
RJ-45/SFP 10/100/1000 combo ports 2 2 2 2 0
SFP uplink/stacking ports 2 2 2 2 2
PoE ports 0 0 8 8 8
Maximum units stackable* 4 4 4 4 N/A
Dimensions
Switch width 8.50 in. (21.5 cm) 8.50 in. (21.5 cm) 8.50 in. (21.5 cm) 8.50 in. (21.5 cm) 8.50 in. (21.5 cm)
Switch height 1.73 in. (4.4 cm) 1.73 in. (4.4 cm) 1.73 in. (4.4 cm) 1.73 in. (4.4 cm) 1.73 in. (4.4 cm)
Switch depth 11.5 in. (29.21 cm) 11.5 in. (29.21 cm) 11.5 in. (29.21 cm) 11.5 in. (29.21 cm) 11.5 in. (29.21 cm)
Performance (Aggregated)
Switch capacity (with 2GigE uplinks) 5.6 Gb/s 20 Gb/s 5.6 Gb/s 20 Gb/s 20 Gb/s
Switch capacity (with 4GigE uplinks) 9.6 Gb/s 24 Gb/s 9.6 Gb/s 24 Gb/s N/A
Max frame rate (4GigE or 2GigE uplinks) 14.28 Mp/s 35.70 Mp/s 14.28 Mp/s 35.70 Mp/s 29.76 Mp/s
(2 uplinks)
Stacking capacity (2x5Gbs stacking) 10/20 Gb/s 10/20 Gb/s 10/20 Gb/s 10/20 Gb/s N/A
Operating conditions
Operating temperature 0°C to +45°C
32°F to +113°F
Storage temperature -40°C to +75°C
-40°F to +167°F
Humidity (operating and storage) 5% to 95% 5% to 95% 5% to 95% 5% to 95% 5% to 95%
MTBF (hours) 695,192 695,192 499,729 499,729 329,729
Power supply efficiency 85.6% 85.6% 90.1% 90.1% 88.46%
Fan-less design (Yes/No) Yes Yes Yes Yes No (1+1 redundant)
Acoustic (dB) Silent Silent Silent Silent <40 db(A)
System power consumption (watts/btu)**
• 0% traffic
• 50% traffic
• 100% traffic
PoE power budget N/A N/A 115 W 115 W 280 W
12.40W / 42.31
12.70W / 43.33
12.70W / 43.33
0°C to +45°C
32°F to +113°F
-40°C to +75°C
-40°F to +167°F
13.00W / 44.35
15.00W / 51.18
15.2W / 51.86
0°C to +45°C
32°F to +113°F
-40°C to +75°C
-40°F to +167°F
12.90W / 44.01
13.61W / 46.43
13.65W / 46.57
0°C to +45°C
32°F to +113°F
-40°C to +75°C
-40°F to +167°F
14.20W / 48.45
16.30W / 55.61
16.35W / 55.78
0°C to +45°C
32°F to +113°F
-40°C to +75°C
-40°F to +167°F
20.20W / 68.92
22.25W / 75.92
23.80W / 81.20
Alcatel-Lucent OmniSwitch 6450-10
ALCATELLUCENT ENT ERPRISE DATA SH EE T
2
Page 3
PORT OS645010L OS645010/10M OS6450P10L OS6450P10 OS6450P10S*
Max PoE power/port
(up to the power budget)
Ports 5-8: 31W (two pair)
PoE device heat dissipation (btu) N/A N/A 409 409 921
* All PoE ports support IEEE 802.3af/802.3at. PoE (four pair) ports 1-4 are compliant with the PoE portion of the Power over HD Base-T (PoH) standard with a 280W PoE power
budget.
** Power consumption measured with 64 byte packets at varied % traffic conditions on all port, including the stacking ports
N/A N/A 31W 31W Ports 1-4: 75W
(four pair)
Indicators
System LEDs
• System (OK) (chassis HW/SW status)
• PWR (primary power supply status)
• PRI (virtual chassis primary)
• BPS (backup power status)
• STK (stacking indicator for 10 port models)
Per-port LEDs
• 10/100/1000: PoE, link/activity
• SFP: Link/activity
• Stacking: Link/activity
Compliance and certifications
Commercial
EMI/EMC
• FCC CRF Title 47 Subpart B (Class A limits.
Note: Class A with UTP cables)
• VCCI (Class A limits. Note: Class A with UTP
cables)
• AS/NZS 3548 (Class A limits. Note: Class A
with UTP cables)
• CE-Mark: Marking for European countries
(Class A limits. Note: Class A with UTP
cables)
• CE-Mark
¬ 2006/95/EC: Low voltage Directive
¬ 2004/108/EC: EMC-Directive
¬ 2011/65/EU: RoHS-Directive
• EN 55022: 2010 (EMI and EMC requirement))
• EN 61000-3-3: 2008
• EN 61000-3-2: 2006+A1:2009+A2
(Limits for harmonic current emissions)
• EN 55024: 2010 (ITE Immunity
characteristics)
¬ EN 61000-4-2: 2008
¬ EN 61000-4-3: 2010
¬ EN 61000-4-4: 2011
¬ EN 61000-4-5: 2005
¬ EN 61000-4-6: 2008
¬ EN 61000-4-8: 2009
¬ EN 61000-4-11: 2004
• IEEE802.3: Hi-Pot Test (2250 V DC on
all Ethernet ports)
• EN 50581: 2012 Standard for technical
documentation for RoHS recast
Safety agency certifications
• CB Scheme: Certification per IEC 60950/
EN 60950 with all different country
deviations, IEC 60950-1:2005: 2nd Edition
¬ UL 60950 United States
¬ IEC 60950-1:2006; all national
deviations
¬ EN 60950-1: 2nd Edition+A11:
2009+A1: 2010+A12: 2011 (Electric/
Health & Safety) all national deviations
¬ CAN/CSA-C22.2 No. 60950-1-03
¬ NOM-019 SCFI, Mexico
¬ AS/NZ TS-001 and 60950:2000,
Australia
¬ UL-AR, Argentina
¬ UL-GS Mark, Germany
• IEC 60825-1 Laser, IEC 60825-2 Laser
• CDRH Laser
DETAILED PRODUCT FETAURES
Simplified management
Configuration management interfaces
• Intuitive Alcatel-Lucent command-line
interface (CLI) with familiar interface
reducing training costs
• Easy-to-use, point-and-click web-based
element manager (WebView) with built-in
help for easy configuration
• Integration with Alcatel-Lucent OmniVista
for network management
• Full configuration and reporting using
SNMPv1/2/3 across all OmniSwitch
families to facilitate third-party Network
Management System (NMS) integration
• Remote Telnet management or Secure
Shell access using SSHv2
• File upload using USB, TFTP, FTP, SFTP, or
SCP for faster configuration
• Human-readable ASCII-based configuration
files for offline editing and bulk
configuration
• Managed by Alcatel-Lucent 5620 Service
Aware Manager
Monitoring and troubleshooting
• Local (on the flash) and remote server
logging: Syslog and command log
• Port-based mirroring for troubleshooting
and lawful interception supporting four
sessions with multiple sources-to-one
destination
• Policy-based mirroring – allows selection
of the type of traffic to mirror by using
quality of service (QoS) policies
• Remote port mirroring that facilitates
passing mirrored traffic through the
network to a remotely connected device
• Port monitoring feature that allows
capture of Ethernet packets to a file,
or for on-screen display to assist in
troubleshooting
• sFlow v5 and RMON: For advanced
monitoring and reporting capabilities
for statistics, history, alarms, and events
• IP tools: Ping and trace route
• Digital Diagnostic Monitoring (DDM):
Real-time diagnostics of fiber connections
for early detection of optical signal
deterioration
• Time Domain Reflectometry (TDR): For
locating breaks or other discontinuity
in copper cables
Network configuration
• Auto remote configuration download
feature
• Auto-negotiating 10/100/1000 ports
automatically configure port speed and
duplex setting
• Auto MDI/MDIX automatically configures
transmit and receive signals to support
straight through and crossover cabling
• BootP/Dynamic Host Configuration
Protocol (DHCP) client allows auto-config
of switch IP information for simplified
deployment
• DHCP relay to forward client requests to a
DHCP server
• Alcatel-Lucent Mapping Adjacency Protocol
(AMAP) for building topology maps
Alcatel-Lucent OmniSwitch 6450-10
ALCATELLUCENT ENT ERPRISE DATA SH EE T
3
Page 4
• IEEE 802.1AB Link Layer Discovery
Protocol (LLDP) with MED extensions for
automated device discovery
• Multiple VLAN Registration Protocol
(MVRP) for IEEE 802.1Q-compliant. VLAN
pruning and dynamic VLAN creation
• Auto QoS for switch management traffic
as well as traffic from Alcatel-Lucent IP
phones
• IEEE 1588v2 Precision Timing Protocol
(PTP) via end-to-end Transparent Clock
(TC) for network-wide time synchronized
applications: – “S” models only
• Network Time Protocol (NTP) for networkwide time synchronization
• Stackable to 4 units
Resiliency and high availability
• Rapid Ring Spanning Tree Protocol (RRSTP)
optimized for ring topology to provide
less than 100 ms convergence time
• IEEE 802.1s Multiple Spanning Tree
Protocol: Encompasses IEEE 802.1D STP
and IEEE 802.1w Rapid Spanning Tree
Protocol
• Per-VLAN spanning tree (PVST) and
Alcatel-Lucent 1x1 STP mode
• IEEE 802.3ad Link Aggregation Control
Protocol (LACP) and static LAG groups
across modules is supported
• Dual-home link (DHL) support for sub
second link protection without STP
• Virtual Router Redundancy Protocol
(VRRP) to provide highly available routed
environments
• Broadcast and multicast storm control
to avoid degradation in overall system
performance
• Unidirectional Link Detection (UDLD):
Detects and disables unidirectional links
on fiber optic interfaces
• Layer 2 port loopback detection for
preventing customer loops on Ethernet
access ports
• Redundant and hot-swappable power
supplies, transceivers modules offering
uninterruptable service
• Dual image and dual configuration files
storage provides backup
Advanced security
Access control
• AOS Access Guardian framework for
comprehensive user policy- based
Network Access Control (NAC)
• Autosensing 802.1X multi-client,
multi-VLAN
• MAC-based authentication for non-802.1x
hosts
• Web-based authentication (Captive
Portal) – a customizable web portal
residing on the switch that can be used
for authenticating supplicants as well as
non-supplicants
• Group mobility rules and “guest” VLAN
support
• The host integrity check (HIC) agent on
each switch makes it a HIC enforcer and
facilitates endpoint device control for
company policy compliance.
• Supports dynamic Change of
Authentication (CoA) and enforces traffic
remediation or restriction for noncompliant devices.
• User Network Profile (UNP) – simplify NAC
management and control by dynamically
providing pre-defined policy configuration
to authenticated clients — VLAN, ACL,
BW, HIC
• SSH for secure CLI session with public
key infrastructure (PKI) support
• Centralized RADIUS and Lightweight
Directory Access Protocol (LDAP) user
authentication
• Private VLAN feature for user traffic
segregation
Containment, monitoring and quarantine
• Alcatel-Lucent Quarantine Manager and
quarantine VLAN (not supported)
• Learned Port Security (LPS) or MAC
address lockdown – secures the network
access on user or trunk ports based on
MAC address
• DHCP Snooping, DHCP IP Spoof protection
• TACACS+ client allows for authentication
authorization and accounting with a
remote TACACS+ server
• Dynamic Address Resolution Protocol
(ARP) protection and ARP poisoning
detection
• Access control lists to filter out unwanted
traffic including denial of service attacks;
flow-based filtering in hardware (L1-L4)
• Bridge Protocol Data Unit (BPDU) blocking
– automatically shuts down user ports
if a STP BPDU packet is seen to prevent
topology loops
• STP Root Guard – prevents edge devices
from becoming Spanning Tree Protocol
root node
Converged networks
PoE
• The PoE models support Alcatel-Lucent
IP phones and WLAN access points, as
well as any IEEE 802.3af or IEEE 802.3at
compliant end device.
• The P10S PoE model supports IEEE
802.3af, IEEE 802.3at and is compliant
the PoE section of the PoH (Power over
HDBase-T) standard
• Configurable per port PoE priority and
max power for power allocation
• Dynamic PoE allocation delivers only the
power needed by the Powered Devices
(PD) up to the total power budget for
most efficient power consumption.
QoS
• Priority queues: Eight hardware-based
queues per port for flexible QoS
management
• Traffic prioritization: Flow-based QoS
with internal and external (that is,
remarking) prioritization
• Bandwidth management: Flow-based
bandwidth management, ingress rate
limiting; egress rate shaping per port
• Queue management: Configurable
scheduling algorithm – Strict Priority
(SQP), Weighted Round Robin (WRR) and
Deficit Round Robin (DRR)
• Congestion avoidance: Support for Endto-End Head of Line (E2E-HOL) Blocking
Protection
• Auto QoS for switch management traffic
as well as traffic from Alcatel-Lucent IP
phones
• Three color marker – single/dual rate
– policing with commit BW, excess BW,
burst size
Layer 2, Layer 3 routing and
multicast
Layer 2 switching
• Up to 16,000 MACs
• Up to 4000 VLANs
• Up to 2K Access Control Lists (ACLs)
• Latency: <4 s
IPv4 and IPv6
• Static routing for IPv4 and IPv6
• RIP v1 and v2 for IPv4, RIPng for IPv6
• Up to 256 IPv4/128 IPv6 static and
RIP routes
• Up to 128 IPv4 and 16 IPv6 interfaces
• Up to 1k Arp entries
Multicast
• IGMPv1/v2/v3 snooping to optimize
multicast traffic
• Multicast Listener Discovery (MLD)
v1/v2 snooping
• Up to 1000 multicast groups/stack
• IP Multicast VLAN (IPMVLAN) for
optimized multicast replication at the
edge saving network core resources
Alcatel-Lucent OmniSwitch 6450-10
ALCATELLUCENT ENT ERPRISE DATA SH EE T
4
Page 5
Network protocols
• DHCP relay (including generic UDP relay)
• ARP
• DHCP relay
• DHCP relay to forward client requests to
a DHCP server
• Generic User Datagram Protocol (UDP)
relay per VLAN
• DHCP Option 82 – configurable relay agent
information
Metro Ethernet access (features
available on “M” models or with
metro license upgrade)
• Ethernet services support per IEEE
802.1ad Provider Bridge
¬ Transparent LAN Services with Service
VLAN (SVLAN) and Customer VLAN
(CVLAN) concept
¬ Ethernet network-to-network interface
(NNI) and user network interface (UNI)
services
¬ Service Access Point (SAP) profile
identification
¬ CVLAN to SVLAN translation and
mapping
• IEEE 802.1ag Ethernet OAM: Connectivity
Fault Management (L2 ping and link trace )
• Ethernet OAM compliant with IEEE
802.3ah
• ITU-T G.8032 Ethernet Ring Protection
designed for loop protection and fast
convergence times (sub 50 ms) in ring
topologies
• Private VLAN feature for user traffic
segregation
• Service Assurance Agent (SAA) for
proactively measuring network health,
reliability and performance. Four SAA
tests including L2-MAC, IP, ETH-LB and
ETH-DMM depending on your network
requirements
• Customer Provider Edge (CPE) test head
traffic generator and analyzer tool used
in the metro Ethernet network to validate
customer Service Level Agreements (SLA)
• IPMVLAN for optimized multicast
replication at the edge saving network
core resources
• Layer 2 Multicast VLAN Replication (MVR)
– allows users from different multicast
VLANs to subscribe to a multicast group
from an upstream trunk interface
• Three color marker – single/dual rate
– policing with commit BW, excess BW,
burst size
• TR-101 Point-to-Point Protocol over
Ethernet (PPPoE) Intermediate Agent
allowing for the PPPoE network access
method
• MAC-forced forwarding support according
to RFC 4562
• L2CP – Layer 2 Control Protocol for
tunneling a customer’s L2CP frames, using
a well known address, on a given UNI for
the EPL and EVPL services
• Dying Gasp using SNMP and Ethernet
OAM delivery
• Metro Ethernet Forum CE 2.0 Certified
• Managed by Alcatel-Lucent 5620 Service
Aware Manager
Supported standards
IEEE standards
• IEEE 802.1D (STP)
• IEEE 802.1p (CoS)
• IEEE 802.1Q (VLANs)
• IEEE 802.1ad (Provider Bridge)
• Q-in-Q (VLAN stacking)
• IEEE 802.1ag (Connectivity Fault
Management)
• IEEE 802.1s (MSTP)
• IEEE 802.1w (RSTP)
• IEEE 802.1X (Port-based Network Access
Protocol)
• IEEE 802.3i (10Base-T)
• IEEE 802.3u (Fast Ethernet)
• IEEE 802.3x (Flow Control)
• IEEE 802.3z (Gigabit Ethernet)
• IEEE 802.3ab (1000Base-T)
• IEEE 802.3ac (VLAN Tagging)
• IEEE 802.3ad (Link Aggregation)
• IEEE 802.3af (Power over Ethernet)
• IEEE 802.3at (Power over Ethernet)
• IEEE 802.ah (Ethernet first mile)
• IEEE 1588v2 Precision Timing Protocol
(PTP) “S” models only
¬ End-to-end Transparent Clock (TC)
¬ IPv4 Unicast address or Ethernet
Multicast Encapsulation
ITU-T standards
• ITU-T G.8032: Draft (June 2007) Ethernet
Ring Protection
• ITU-T Y.1731 OA&M fault and performance
management
IETF standards
RIP
• RFC 1058 RIP v1
• RFC 1722/1723/1724/2453 RIP v2
and MIB
• RFC 1812/2644 IPv4 Router Requirement
• RFC 2080 RIPng for IPv6
IP Multicast
• RFC 1112 IGMP v1
• RFC 2236/2933 IGMP v2 and MIB
• RFC 2365 Multicast
• RFC 3376 IGMPv3 for IPv6
IPv6
• RFC 1886 DNS for IPv6
• RFC 2292/2373/2374/2460/2462
• RFC 2461 NDP
• RFC 2463/2466 ICMP v6 and MIB
• RFC 2452/2454 IPv6 TCP/UDP MIB
• RFC 2464/2553/2893/3493/3513
• RFC 3056 IPv6 Tunneling
• RFC 3542/3587 IPv6
• RFC 4007 IPv6 Scoped Address
Architecture
• RFC 4193 Unique Local IPv6 Unicast
Addresses Manageability
• RFC 1350 TFTP Protocol
• RFC 854/855 Telnet and Telnet options
• RFC 1155/2578-2580 SMI v1 and SMI v2
• RFC 1157/2271 SNMP
• RFC 1212/2737 MIB and MIB-II
• RFC 1213/2011-2013 SNMP v2 MIB
• RFC 1215 Convention for SNMP Traps
• RFC 1573/2233/2863 Private Interface
MIB
• RFC 1643/2665 Ethernet MIB
• RFC 1901-1908/3416-3418 SNMP v2c
• RFC 2096 IP MIB
• RFC 2570-2576/3411-3415 SNMP v3
• RFC 3414 User-based security model
• RFC 2616/2854 HTTP and HTML
• RFC 2667 IP Tunneling MIB
• RFC 2668/3636 IEEE 802.3 MAU MIB
• RFC 2674 VLAN MIB
• RFC 4251 Secure Shell Protocol
architecture
• RFC 4252 The Secure Shell (SSH)
Authentication Protocol
• RFC 959/2640 FTP
Security
• RFC 1321 MD5
• RFC 2104 HMAC Message Authentication
• RFC 2138/2865/2868/3575/2618 RADIUS
Authentication and Client MIB
• RFC 2139/2866/2867/2620 RADIUS
Accounting and Client MIB
• RFC 2228 step
• RFC 2284 PPP EAP
• RFC 2869/3579 Radius Extension
Alcatel-Lucent OmniSwitch 6450-10
ALCATELLUCENT ENT ERPRISE DATA SH EE T
5
Page 6
Quality of service
• RFC 896 Congestion control
• RFC 1122 Internet Hosts
• RFC 2474/2475/2597/3168/3246
DiffServ
• RFC 3635 Pause Control
• RFC 2697 srTCM
• RFC 2698 trTCM
Others
• RFC 791/894/1024/1349 IP and IP/Ethernet
• RFC 792 ICMP
• RFC 768 UDP
• RFC 793/1156 TCP/IP and MIB
• RFC 826/903 ARP and Reverse ARP
• RFC 919/922 Broadcasting Internet
datagram
• RFC 925/1027 Multi LAN ARP/Proxy ARP
• RFC 950 Sub-netting
• RFC 951 BootP
• RFC 1151 RDP
• RFC 1191 Path MTU Discovery
• RFC 1256 ICMP Router Discovery
• RFC 1305/2030 NTP v3 and Simple NTP
• RFC 1493 Bridge MIB
• RFC 1518/1519 CIDR
• RFC 1541/1542/2131/3396/3442 DHCP
• RFC 1757/2819 RMON and MIB
• RFC 2131/3046 DHCP/BootP Relay
• RFC 2132 DHCP Options
• RFC 2251 LDAP v3
• RFC 3060 Policy Core
• RFC 3176 sFlow
• RFC 3021 Using 31-bit prefixes
OMNISWITCH 645010 MODELS ORDERING
PART NUMBER DESCRIPTION
OS6450-10L Fast Ethernet chassis in a 1 RU form factor with eight 10/100Base-T, two 10/100/1000 RJ-45/SFP combo and two
fixed SFP uplink/stacking ports
OS6450-10 Gigabit Ethernet chassis in a 1 RU form factor with eight 10/100/1000Base-T, two 10/100/1000 RJ-45/SFP combo
and two fixed SFP uplink/stacking ports
OS6450-10 M Gigabit Ethernet chassis in a 1 RU form factor with eight 10/100/1000Base-T, two 10/100/1000 RJ-45/SFP combo
and two fixed SFP uplink/stacking ports. Metro ethernet services enabled by default
OS6450-P10L Fast Ethernet chassis in a 1 RU form factor with eight PoE 10/100Base-T, two 10/100/1000 RJ-45/SFP combo and
two fixed SFP uplink/stacking ports
OS6450-P10 Gigabit Ethernet chassis in a 1 RU form factor with eight PoE 10/100/1000Base-T, two 10/100/1000 RJ-45/SFP
combo and two fixed SFP uplink/stacking ports
OS6450-P10S Gigabit Ethernet chassis in a 1 RU form factor with eight PoE 10/100/1000Base-T and two fixed gigabit SFP uplink
ports. Supports IEEE 802.3af, IEEE 802.3at and 4x75W PoE (four pair) ports compliant with the Power over HD
Base-T (PoH) standard with a 280W PoE power budget. Supports 1588v2 precision timing protocol.
License options All models above support the below license options.
OS6450-10L-UPGD Software license enabling gigabit speeds on the RJ-45 ports of OS6450-10L and OS6450-P10L chassis to operate at
gigabit speed
OS6450-SW-ME OS6450 software license enables the Metro software features outlined in the Metro Ethernet access section of this
data sheet.
Mounting options Order optional 19” rack mounting kit separately
OS6450-RM-19-L Simple L-bracket for mounting a single OS6450-10 model switch in a 19-in. rack
OS6450-DUAL-MNT Two universal mounting and sliding brackets accessory kit. Hardware to mount two 6450-10 units in a 19-in. rack
Gigabit transceivers
SFP-GIG-LH70 1000Base-LH transceiver with an LC interface for single mode fiber over 1550 nm wavelength. Typical reach of 70 km
SFP-GIG-LH40 1000Base-LH transceiver with an LC interface for single mode fiber over 1310 nm wavelength. Typical reach of 40 km
SFP-GIG-LX 1000Base-LX transceiver with an LC interface for single mode fiber over 1310 nm wavelength. Typical reach of 10 km
SFP-GIG-SX 1000Base-SX transceiver with an LC interface for multimode fiber over 850 nm wavelength. Typical reach of 300 m
SFP-GIG-BX-D 1000Base-BX bidirectional transceiver with an LC type interface for use over single mode fiber optic on a single
strand link up to 10 km point to point. Transmits 1490 nm and receives 1310 nm optical signal
SFP-GIG-BX-U 1000Base-BX bidirectional transceiver with an LC type interface for use over single mode fiber optic on a single
strand link up to 10 km point to point. Transmits 1310 nm and receives 1490 nm optical signal
100 Megabit transceivers
SFP-100-MM 100Base-FX transceiver with an LC interface for multimode fiber optic cable
SFP-100-SM15 100Base-FX transceiver with an LC type interface for single mode fiber optic cable up to 15 km
SFP-100-SM40 100Base-FX transceiver with an LC type interface for single mode fiber optic cable up to 40 km
SFP-100-BX-U 100Base-BX bidirectional transceiver with an SC type interface for use over single mode fiber optic on a single strand
link up to 20 km point to point, where the client (ONU) transmits 1310 nm and receives 1550 nm optical signal
SFP-100-BX-D 100Base-BX bidirectional transceiver with an SC type interface for use over single mode fiber optic on a single strand
link up to 20 km point to point, where the client (OLT) transmits 1550 nm and receives 1310 nm optical signal
enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other
trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the
property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its
affiliates assumes any responsibility for inaccuracies contained herein. (October 2016)
Loading...