The Alcatel-Lucent OmniSwitch® 6250 is a stackable layer-2+ Fast Ethernet LAN value switch
family for both the enterprise and Ethernet access segments. The enterprise models address the
small and mid-sized enterprise edge and branch office environments, while the metro models
address the residential and business Ethernet access supplied by service providers.
With an optimized design for flexibility and scalability as well as low power consumption,
the OmniSwitch 6250 runs the field-proven Alcatel-Lucent Operating System (AOS), providing
an outstanding edge solution for highly available, self-protective, easily managed and
eco-friendlynetworks.
Solutions benefiting from the OmniSwitch 6250 family of switches are:
• Edge of small to mid-sized networks
• Branch office enterprise workgroups
• Residential or metro Ethernet triple-play applications
BENEFITS
• Provides simplified selection with only
two enterprise models: Power-overEthernet (PoE) and non-PoE
• Reduces sparing and inventory costs
• Allows any combination of PoE and
OmniSwitch 6250-24/P24/24M/24MD
OmniSwitch 6250-8M
non-PoE, up to 192 ports
• Meets the customers’ configuration needs
and offers excellent investment protection
and flexibility, as well as easy deployment,
operation and maintenance
• Small form factor and low noise output
make the OmniSwitch 6250 ideal for
collocation environments. The low power
consumption reduces the operating
expenses and cooling costs, which leads to
lower operating expenditures (OPEX) and
faster return on investment (ROI).
• Leads the industry in price/featureperformance ratio and offers customers a
cost-efficient network technology upgrade,
without needing to move to a higherpriced, layer-2+ gigabit solution
• Outstanding list of features and
performance for supporting scalable, realtime voice, data and video applications for
converged networks
• Supports cost-effective installation and
deployment with automated switch setup
and configuration, as well as end-to-end
virtual LAN (VLAN) provisioning
• A field-upgradeable solution that makes
the network highly available and
reducesOPEX
• Fully secures the network at the edge at
no additional cost
• The lifetime warranty eliminates service
program costs and ongoing service
renewals, lowering total cost of ownership
(TCO) and allowing customers to reach ROI
targets more quickly
• Simplifies metro Ethernet network OAM
for service providers
FEATURES
• Offers innovative half-rack-wide
models for a great variety of switch
combinationdeployments
• Highly efficient and optimized in their
form factor, power consumption and
acoustic output
• A feature-rich, cost-effective, 10/100
stackable switch built on the latest
ASICtechnologies
• Scalability from 24 to 192 Fast Ethernet
and 16- gigabit uplink ports
• The Alcatel-Lucent virtual chassis design
provides resiliency with integrated 5 G
HDMI performance
• Optional metro services feature license for
service provider deployments
• Support for IEEE 802.3af as well as IEEE
802.3at-compliant PoE
• AC or DC redundant power supplies
• Limited Lifetime Warranty Software and
Hardware Support included
MANAGEMENT
• AOS field-proven software with
management through web interface
(WebView), command line interface (CLI),
and Simple Network Management Protocol
(SNMP)
• Supporting programmable AOS OpenFlow
for the creation of specialized services.
• Ethernet operations, administration and
management (OA&M) support for service
configuration and monitoring
• Support by Alcatel-Lucent OmniVista®
2500 Network Management System (NMS)
• Alcatel-Lucent 5620 Service Aware
Manager (SAM) applications for
serviceproviders
SECURITY
• Flexible device and user authentication
with Alcatel-Lucent Access Guardian (IEEE
802.1x/MAC/captive portal) with Host
Integrity Check (HIC) enforcement
• Enables deployment of comprehensive
and secure BYoD services in enterprise
networks such as guest management,
device on-boarding, device posturing,
application management and dynamic
change of authentication (CoA).
• Advanced Quality of Service (QoS) and
Access Control Lists (ACLs) for traffic
control, including an embedded Denial of
Service (DoS) engine to filter out unwanted
traffic attacks
• Extensive support of user-oriented
features such as learned port security
(LPS), port mapping, Dynamic Host
Configuration Protocol (DHCP) binding
tables and User Network Profile (UNP)
PERFORMANCE ANDREDUNDANCY
• Advanced layer-2+ features with basic
layer-3 routing for both IPv4 and IPv6
• Triple- speed (10/100/1000) user
interfaces and fiber interfaces (SFPs)
supporting 100Base X or 1000Base-X
optical transceivers
• Wire-rate switching and
routingperformance
• High availability with virtual chassis
concept, redundant stacking links,
primary/secondary unit failover,
hot-swappable power options and
configuration rollback
CONVERGENCE
• Enhanced Voice over IP (VoIP) and video
performance with policy-based QoS
• Support for multimedia applications with
wire-rate multicast
• Airgroup™ Network Services for
Bonjour®- speaking devices provides
consistent experience over wireless and
wirednetworks
• IEEE 802.3at PoE+ support for IP phones,
wireless LAN (WLAN) access points and
video cameras
AVAILABLE OMNISWITCH 6250 MODELS
24-port models
CHASSIS10/100
RJ45 PORTS
GIGABIT COMBO
PORTS
HDMI STACKING
2.5 GB/S
PRIMARY POWERBACKUP POWER
Non-PoE models
OS6250-242422Internal ACExternal AC brick supply
Non-PoE models
OS6250-P242422225 W, external AC supply225 W, external AC supply
• The combo ports are configurable to 10/100/1000Base-T or may use 100/1000Base-X based transceivers.
AVAILABLE OMNISWITCH 6250 METRO MODELS
8- and 24-port models
CHASSIS10/100
RJ45 PORTS
GIGABIT
COMBO PORTS
DAC STACKING
2.5 GB/S
PRIMARY
POWER
BACKUP
POWER
OS6250-8M822Internal AC supplyN/A
OS6250-24M2422Internal AC supplyExternal DC brick supply
OS6250-24MD2422Internal DC supplyExternal DC brick supply
The OmniSwitch 6250 metro models support additional metro software features outlined later in this document.
• The combo ports are configurable to 10/100/1000Base-T or may use 100/1000Base-X based transceivers.
• The SFP ports of the “M” model support only gigabit transceivers or OmniSwitch 6250 small form factor pluggable (SFP) direct stacking cable.
Alcatel-Lucent Omniswitch 6250
ALCATEL-LUCENT ENTERPRISE DATA SHE ET
2
DETAILED PRODUCT FEATURES
Simplified management
Configuration management interfaces
• Intuitive command line interface (CLI) with
familiar interface, reducing training costs
• Easy-to-use, point-and-click web-based
element manager (WebView) with built-in
help for easy configuration
• Integration with Alcatel-Lucent OmniVista®
2500 for network management
• Full configuration and reporting using
SNMPv1/2/3 across all OmniSwitch
families to facilitate third-party network
management system (NMS) integration
• Remote Telnet management or Secure
Shell access using SSHv2
• File upload using USB, TFTP, FTP, SFTP, or
SCP for faster configuration
• Human-readable ASCII-based
configuration files for off-line editing and
bulkconfiguration
• Managed by Alcatel-Lucent 5620 Service
Aware Manager
Monitoring and troubleshooting
• Local (on the flash) and remote server
logging: Syslog and command log
• Port-based mirroring for troubleshooting
and lawful interception supports
four sessions with multiple
sources-to-onedestinations
• Policy-based mirroring that allows
selecting the type of traffic to mirror by
using QoS policies
• Remote port mirroring that facilitates
passing mirrored traffic through the
network to a remotely connected device
• Port monitoring feature that allows
capturing Ethernet packets to a file,
or to an on-screen display to assist
introubleshooting
• sFlow v5 and RMON for advanced
monitoring and reporting capabilities for
statistics, history, alarms and events
• IP tools: Ping and trace route
• Digital Diagnostic Monitoring (DDM):
Real-time diagnostics of fiber
connections for early detection of optical
signaldeterioration
• Time Domain Reflectometry (TDR) for
locating breaks or other discontinuity in
copper cables
Network configuration
• Remote auto-configuration download
• Auto-negotiating 10/100/1000 ports
automatically configure port speed and
duplex setting
• Auto MDI/MDIX configureing transmit and
receive signals to support straight-through
and crossover cabling
• BOOTP/DHCP client that allows autoconfiguring switch IP information for
simplified deployment
• DHCP relay for forwarding client requests
to a DHCP server
• Alcatel-Lucent Mapping Adjacency
Protocol (AMAP) for building
topologymaps
• IEEE 802.1AB Link Layer Discovery
Protocol (LLDP) with MED extensions for
automated device discovery
• Multiple VLAN Registration Protocol
(MVRP) for IEEE 802.1Q-compliant
virtual LAN (VLAN) pruning and dynamic
VLANcreation
• Auto QoS for switch management traffic
and traffic from Alcatel-Lucent IP phones
• Network Time Protocol (NTP) for networkwide time synchronization
• Stackable to eight units
Resiliency and high availability
• Ring Rapid Spanning Tree (RRSTP)
optimized for ring topology to provide
less than 100 ms convergence time
• IEEE 802.1s Multiple Spanning Tree
Protocol: Encompasses IEEE 802.1D
STP and IEEE 802.1w Rapid Spanning
TreeProtocol
• Per-VLAN spanning tree (PVST) and
1x1 STP mode
• Support for IEEE 802.3ad Link Aggregation
Control Protocol (LACP) and static LAG
groups across modules
• Dual-home link (DHL) support for subsecond link protection without STP
• Virtual Router Redundancy Protocol
(VRRP) providing highly available
routedenvironments
• Broadcast and multicast storm control
to avoid degradation in overall
systemperformance
• Unidirectional Link Detection (UDLD) for
detecting and disabling unidirectional links
on fiber optic interfaces
• Layer-2 port loopback detection for
preventing customer loops on Ethernet
access ports
• Redundant and hot-swappable power
supplies, transceiver modules offering
uninterruptable service
• Dual-image and dual-configuration file
storage provide backup
Advanced security
Access control
• AOS Access Guardian framework for
comprehensive user-policy-based network
access control (NAC)
• Web-based authentication (Captive Portal):
A customizable web portal residing on the
switch that can be used for authenticating
supplicants as well as non-supplicants
• Group mobility rules and “guest”
VLANsupport
• Host integrity check (HIC) agent on each
switch makes it an HIC enforcer and
facilitates endpoint device control for
company policy compliance. Support for
quarantine and remediation as required.
• Support for dynamic change of
authentication (CoA) and enforcing traffic
remediation or restriction for noncompliant devices
• User network profile (UNP): Simplify NAC
management and control by dynamically
providing predefined policy configuration
to authenticated clients (VLAN, ACL,
BW,HIC)
• SSH for secure CLI session with public key
infrastructure (PKI) support
• Centralized Remote Access Dial-In
User Service (RADIUS) and LDAP
userauthentication
• Private VLAN feature for user
trafficsegregation
Containment, monitoring and quarantine
• DHCP snooping, DHCP IP spoof protection
• Terminal Access Controller Access
Control System Plus (TACACS+) client
allowing authentication, authorization and
accounting with a remote TACACS+ server
• Dynamic ARP protection and ARP
poisoning detection
Alcatel-Lucent Omniswitch 6250
ALCATEL-LUCENT ENTERPRISE DATA SHE ET
3
• ACLs filtering out unwanted traffic
including DoS attacks; flow-based filtering
in hardware (L1 to L4)
• BPDU blocking: Automatically shutting
down user ports if an STP BPDU packet is
seen to prevent topology loops
• STP Root Guard: Prevents edge devices
from becoming Spanning Tree Protocol
root nodes
Converged networks
PoE
• PoE models support Alcatel-Lucent
IP phones and WLAN access points,
as well as any IEEE 802.3af or IEEE
802.3at-compliant end devices
• Configurable per-port PoE priority and
max power for power allocation
• Dynamic PoE allocation: Delivering only
the power needed by the powered devices
(PD) up to the total power budget for most
efficient power consumption
QoS
• Priority queues: Eight hardwarebased queues per port for flexible
QoSmanagement
• Traffic prioritization: Flow-based
QoS with internal and external
(remarking)prioritization
• Bandwidth management: Flow-based
bandwidth management, ingress rate
limiting; egress rate shaping per port
• Queue management: Configurable
scheduling algorithms, including Strict
Priority Queuing (SPQ), Weighted
Round Robin (WRR) and Deficit Round
Robin(DRR)
• Congestion avoidance: Support for
End-to-End Head-Of-Line (E2E-HOL)
BlockingProtection
• Auto QoS for switch management traffic
as well as traffic from Alcatel-Lucent
IPphones
Metro Ethernet access
(features available through Metro
licenseupgrade)
• Ethernet services support per IEEE
802.1ad Provider Bridge
¬ Transparent LAN Services with Service
VLAN (SVLAN) and Customer VLAN
(CVLAN) concept
¬ Ethernet network-to-network interface
(NNI) and user network interface
(UNI)services
¬ Service Access Point (SAP)
profileidentification
¬ CVLAN to SVLAN translation
andmapping
• IEEE 802.1ag Ethernet OAM: Connectivity
Fault Management (L2 ping and link trace)
• Ethernet OAM compliant with
IEEE802.3ah
• ITU-T G.8032 Ethernet Ring Protection
designed for loop protection and
fast convergence times (< 50 ms) in
ringtopologies
• Private VLAN feature for user
trafficsegregation
• Service Assurance Agent (SAA) for
proactively measuring network health,
reliability and performance. Four SAA
tests including L2-MAC, IP, ETH-LB and
ETH-DMM depending on
networkrequirements
• Customer provider edge (CPE) test head
traffic generator and analyzer tool used
in the metro Ethernet network to validate
customer Service Level Agreements (SLAs)
• IPMVLAN for optimized multicast
replication at the edge, saving network
core resources
• Layer-2 Multicast VLAN Replication (MVR)
that allows users from different multicast
VLANs to subscribe to a multicast group
from an upstream trunk interface
• Three-color marker: Single/Dual Rate
policing with commit BW, excess BW and
burst size
• TR-101 PPPoE Intermediate Agent
allowing the PPPoE network
accessmethod
• MAC-forced forwarding support according
to RFC 4562
• Layer-2 Control Protocol (L2CP) for
tunneling a customer’s L2CP frames
through a well-known address, on a
given UNI for Ethernet Private Line
(EPL) and Ethernet Virtual Private Line
(EVPL)services
• Dying Gasp through SNMP and Ethernet
OAM delivery
• Metro Ethernet Forum CE 2.0 Certified
• Managed by Alcatel-Lucent 5620 SAM
Alcatel-Lucent Omniswitch 6250
ALCATEL-LUCENT ENTERPRISE DATA SHE ET
4
TECHNICAL SPECIFICATIONS
AVAILABLE OMNISWITCH 6250 MODELS: TECHNICAL SPECIFICATIONS
ENTERPRISE MODELSMETRO MODELS
OS6240-24OS6250-P24OS6250-8MOS 62 50 -24MOS 62 50 -24M D
Humidity (operating and storage) 5% to 95%5% to 95%5% to 95%5% to 95%5% to 95%
MTBF (hours)268,730189,585290,108268,698268,715
Fanless designYes1 fanYesYesYes
Acoustic (dB) – all fans on*Silent< 35 db(A)SilentSilentSilent
System power consumption
(watts)**
Heat dissipation (BTU)***5985445554
29.21 cm (11.5 in.) 29.21 cm (11.5 in.)29.21 cm (11.5 in.) 29.21 cm (11.5 in.) 29.21 cm (11.5 in.)
47.6 cm (18.88 in.) 47.6 cm (18.88 in.)N/AN/AN/A
13 Mpps
@ 8.8 Gb/s
28 Mpps
@ 18.8 Gb/s
(32°F to 113°F)
(-40°F to +167°F)
13 Mpps
@ 8.8 Gb/s
28 Mpps
@ 18.8 Gb/s
0°C to 45°C
(32°F to 113°F)
-40°C to +75°C
(-40°F to +167°F
14.3 Mpps
@ 9.6 Gb/s
23.2 Mpps
@ 15.6 Gb/s
0°C to 45°C
(32°F to 113°F)
-40°C to +75°C
(-40°F to +167°F)
19 Mpps
@12.8 Gb/s
28 Mpps
@ 18.8 Gb/s
0°C to 45°C
(32°F to 113°F)
-40°C to +75°C
(-40°F to +167°F)
19 Mpps
@ 12.8 Gb/s
28 Mpps
@ 18.8 Gb/s
0°C to 45°C
(32°F to 113°F)
-40°C to +75°C
(-40°F to +167°F)
17.40 W24.90 W12.80 W16.20 W15.89 W
* Acoustic levels measured with a single power supply at room temperature
** Power consumption measured with 64 byte packets at varied traffic conditions on all ports, including the 10GE stacking module (accounting for 8 W).
OmniSwitch 6250 backup power supplies and specifications
The backup power supplies for the OmniSwitch 6250-24 and OmniSwitch 6250-24MD models come in the form of a power brick in either
AC or DC variant and may be mounted to the back of the chassis using the power shelf with securing brackets. All of the required parts are
included in the backup power supply kits.
The OmniSwitch 6250-P24 external 225 W power supply acts as both the primary supply and the redundant supply. The primary supply/tray
combination is attached directly to the back of the chassis. The redundant supply/tray combination is mounted to the side of the switch and
attached using remote cable.
Alcatel-Lucent Omniswitch 6250
ALCATEL-LUCENT ENTERPRISE DATA SHE ET
5
SPECIFICATIONOS6250-BPOS6250-BP-POS6250-BP-D
StyleBrickFramedBrick
Internal/externalInternalExternalExternal
Input voltage90-220V AC90-220V AC36-72V DC
Output voltage12V DC12V DC/54.5V DC12V DC
Wattage42 W225 W30 W
PoE power budgetN/A180 WN/A
Power supply efficiency85%80%85%
Weight0.21 kg (0.45 lb)0.25 kg (0.55 lb)1.04 kg (2.30 lb)
The power supply shelf holds one brick or PoE style backup power supply, and it is mounted to the rear of the unit. Any backup power
supply and shelf may be mounted in a side-by-side configuration to the switch using the supplied mounting ears. This feature allows for
space-sensitive installations requiring reduced depth (for example, in a wall-mounted cabinet).
INDICATORS
System LEDs
• System (OK) (chassis HW/SW status)
• PWR (primary power supply status)
• PRI (virtual chassis primary)
• BPS (backup power status)
• LED segment display indicates the stack
ID of the unit in the stack: 1 to 8 (24/48
portmodels)
Per-port LEDs
• 10/100/1000: PoE, link/activity
• SFP: Link/activity
• Stacking: Link/activity
Compliance and certifications
Commercial
• EMI/EMC
• FCC CRF Title 47 Subpart B (Class A limits.
Note: Class A with UTP cables)
• VCCI (Class A limits. Note: Class A with
UTPcables)
• AS/NZS 3548 (Class A limits. Note: Class A
with UTP cables)
• CE-Mark: Marking for European countries
(Class A limits. Note: Class A with
UTPcables)
• CE-Mark
¬ Low Voltage Directive
¬ EMC Directive
¬ RoHS Directive
• EN 55022 (EMI and EMC requirement)
• EN 61000-3-3
• EN 61000-3-2 (Limits for harmonic
current emissions)
• EN 55024 (ITE Immunitycharacteristics)
¬ EN 61000-4-2
¬ EN 61000-4-3
¬ EN 61000-4-4
¬ EN 61000-4-5
¬ EN 61000-4-6
¬ EN 61000-4-8
¬ EN 61000-4-11
• IEEE802.3: Hi-Pot Test (2250 V DC on all
Ethernet ports)
• EN 50581 Standard for technical
documentation for RoHS recast
Safety agency certifications
• CB Scheme: Certification per IEC 60950/
EN 60950 with all different country
deviations
¬ UL 60950 United States
¬ IEC 60950-1 all national deviations
¬ EN 60950-1 (Electric/Health & Safety),
all national deviations
¬ CAN/CSA-C22.2 No. 60950-1-03
¬ NOM-019 SCFI, Mexico
¬ AS/NZ TS-001 and 60950, Australia
¬ UL-AR, Argentina
¬ UL-GS Mark, Germany
• IEEE 802.1X (Port Based Network
AccessProtocol)
• IEEE 802.3i (10Base-T)
• IEEE 802.3u (Fast Ethernet)
• IEEE 802.3x (Flow Control)
• IEEE 802.3z (Gigabit Ethernet)
• IEEE 802.3ab (1000Base-T)
• IEEE 802.3ac (VLAN Tagging)
• IEEE 802.3ad (Link Aggregation)
• IEEE 802.3af (Power-over-Ethernet)
• IEEE 802.3at (Power-over-Ethernet)
• IEEE 802.ah (Ethernet first mile)
• IEEE 802.3az (Energy Efficient Ethernet)
ITU-T recommendations
• ITU-T Y.1731 OA&M fault and performance
management
• ITU-T G.8032/Y.1344 2010: Ethernet Ring
Protection (ERPv2)
IETF RFCs
RIP
• RFC 1058 RIP v1
• RFC 1722/1723/1724/2453 RIP v2 and
MIB
• RFC 1812/2644 IPv4 Router Requirement
• RFC 2080 RIPng for IPv6
IP Multicast
• RFC 1112 IGMP v1
• RFC 2236/2933 IGMP v2 and MIB
• RFC 2365 Multicast
• RFC 3376 IGMPv3 for IPv6
IPv6
• RFC 1886 DNS for IPv6
• RFC 2292/2373/2374/2460/2462
• RFC 2461 NDP
• RFC 2463/2466 ICMP v6 and MIB
Alcatel-Lucent Omniswitch 6250
ALCATEL-LUCENT ENTERPRISE DATA SHE ET
6
• RFC 2452/2454 IPv6 TCP/UDP MIB
• RFC 2464/2553/2893/3493/3513
• RFC 3056 IPv6 Tunneling
• RFC 3542/3587 IPv6
• RFC 4007 IPv6 Scoped Address
Architecture
• RFC 4193 Unique Local IPv6 Unicast
Addresses
Manageability
• RFC 854/855 Telnet and Telnet options
• RFC 959/2640 FTP
• RFC 1155/2578-2580 SMI v1 and SMI v2
• RFC 1157/2271 SNMP
• RFC 1212/2737 MIB and MIB-II
• RFC 1213/2011-2013 SNMP v2 MIB
• RFC 1215 Convention for SNMP Traps
• RFC 1350 TFTP Protocol
• RFC 1573/2233/2863 Private
InterfaceMIB
• RFC 1643/2665 Ethernet MIB
• RFC 1901-1908/3416-3418 SNMP v2c
• RFC 2096 IP MIB
• RFC 2131 DHCP Server/Client
• RFC 2570-2576/3411-3415 SNMP v3
• RFC3414 User-based Security Model
• RFC 2616 /2854 HTTP and HTML
• RFC 2667 IP Tunneling MIB
• RFC 2668/3636 IEEE 802.3 MAU MIB
• RFC 2674 VLAN MIB
• RFC 2818 HTTPS over SSL
• RFC 4251 Secure Shell Protocol
Architecture
• RFC 4252 The Secure Shell (SSH v2)
Authentication Protocol
Security
• RFC 1321 MD5
• RFC 2104 HMAC Message Authentication
• RFC 2138/2865/2868/3575/2618 RADIUS
Authentication and Client MIB
• RFC 2139/2866/2867/2620 RADIUS
Accounting and Client MIB
• RFC 2228 FTP Security Extensions step
• RFC 2284 PPP EAP
• RFC 2869/3579 Radius Extension
Quality of service
• RFC 896 Congestion Control
• RFC 1122 Internet Hosts
• RFC 2474/2475/2597/3168/3246
DiffServ
• RFC 3635 Pause Control
• RFC 2697 srTCM
• RFC 2698 trTCM
Others
• RFC 791/894/1024/1349 IP and IP/
Ethernet
• RFC 792 ICMP
• RFC 768 UDP
• RFC 793/1156 TCP/IP and MIB
• RFC 826/903 ARP and Reverse ARP
• RFC 919/922 Broadcasting Internet
Datagram
• RFC 925/1027 Multi LAN ARP/Proxy ARP
• RFC 950 Subnetting
• RFC 951 BOOTP
• RFC 1151 RDP
• RFC 1191 Path MTU Discovery
• RFC 1256 ICMP Router Discovery
• RFC 1305/2030 NTP v3 and Simple NTP
• RFC 1493 Bridge MIB
• RFC 1518/1519 CIDR
• RFC 1541/1542/2131/3396/3442 DHCP
• RFC 1757/2819 RMON and MIB
• RFC 2131/3046 DHCP/BOOTP Relay
• RFC 2132 DHCP Options
• RFC 2251 LDAP v3
• RFC 3060 Policy Core
• RFC 3176 sFlow
• RFC 3021 Using 31-bit Prefix
ORDERING INFORMATION
PART NUMBERDESCRIPTION
OS6250-8MOS6250-8M Fast Ethernet chassis with AOS Metro software
Chassis provides 8 RJ-45 ports configurable to 10/100Base-T, 2 SFP/RJ-45 combo ports configurable to be
10/100/1000Base-T or 100/1000Base-X and 2 SFP fiber ports configurable to be 1G uplinks or 2.5 G stacking ports
in a 1U by half-rack form factor with internal AC power supply.
OS6250-24M
OS6250-24MD
OS6250-24OS6250-24 Fast Ethernet chassis with AOS Enterprise software
OS6250-P24OS6250-P24 Fast Ethernet chassis with AOS Enterprise software
BOS6250-48Two OS6250-24 units with AOS Enterprise software bundled for side-by-side mounting in a 19-in. by 1U rack space
BOS6250-P48Two OS6250-P24 units with AOS Enterprise software bundled for side-by-side mounting within a 19-in. by 1U rack
OS6250-24M Fast Ethernet chassis with AOS Metro software
Chassis provides 24 RJ-45 ports configurable to 10/100Base-T, 2 RJ-45/SFP combo ports configurable to be
10/100/1000Base-T or 100/1000Base-X and 2 SFP fiber ports configurable to be 1 G uplinks or 2.5 G stacking ports
in a 1U by half-rack form factor with internal AC or DC power supply respectively.
Chassis includes 24 RJ-45 ports configurable to 10/100Base-T, 2 RJ-45/SFP combo ports configurable to be
10/100/1000Base-T or 100/1000Base-X and 2 dedicated 2.5 G HDMI stacking ports. Ethernet SFP optical
transceivers, HDMI stacking cables and backup power supply can be ordered separately.
Chassis includes 24 PoE RJ-45 ports configurable to 10/100Base-T, 2 SFP/PoE RJ-45 combo ports configurable to
be 10/100/1000Base-T or 100/1000Base-X and 2 dedicated 2.5 G HDMI stacking ports in a 1U by half-rack form
factor with external AC PoE supply. Includes 225 W AC PoE supply and power shelf.
providing a total of 48 Fast Ethernet and 4 RJ-45/SFP combo ports
space for a total of 48 PoE Fast Ethernet ports and 4 PoE RJ-45/SFP combo ports. Includes two 225 W supplies and
power shelves.
Ethernet SFP optical transceivers and SFP direct connect stacking cable can be ordered separately.
Above bundles include country-specific power cords, user manuals access cards, software download access cards, R
J- 45 to DB-9 adapters and hardware for mounting unit side by side with another OmniSwitch 6250 in a 19-in. rack.
Order mounting tray kit (OS6250-RM-19) for single-mounting the unit in a 19-in. rack
Alcatel-Lucent Omniswitch 6250
ALCATEL-LUCENT ENTERPRISE DATA SHE ET
7
LICENSE OPTIONSSUPPORTED ON ANY NON“M” MODELS ABOVE.
OS6250-SW-MEOS6250 Software license enables the Metro Software features outlined in the Metro Ethernet Access section of this
data sheet.
PART NUMBER DESCRIPTION
Power Supplies
OS6250-BPOS6250-BP 40 W power brick AC backup power supply. Provides backup power to one non-PoE switch.
Ships with country-specific power cord, backup power supply tray and securing brackets.
OS6250-BP-POS6250-BP-P 225 W AC PoE backup power supply. Provides backup power to one PoE switch. Ships with country-
specific power cord and backup power supply tray.
OS6250-BP-DOS6250-BP-D 30 W DC power brick backup power supply. Provides backup DC power to one non-PoE switch.
Ships with chassis connection cable, backup power supply tray and securing brackets.
CABLES AND MOUNTING
OS6250-CBL-30OS6250 30-cm long HDMI stacking cable
OS6250-CBL-60OS6250 60-cm long HDMI stacking cable
OS6250-CBL-150OS6250 150-cm long HDMI stacking cable
OS6250M-CBL-30OS6250M 30-cm long SFP direct stacking cable
OS6250M-CBL-60OS6250M 60-cm long SFP direct stacking cable
OS6250M-CBL-150OS6250M 150-cm long SFP direct stacking cable
OS6250-RM-19Tray kit for mounting one OmniSwitch 6250 in a 19-in. rack
OS6250-DUAL-MNTTwo mounting and sliding brackets replacement kit. Hardware to mount two 6250 units in a 19-in. rack
GIGABIT TRANSCEIVERS
SFP-GIG-LH701000Base-LH transceiver with an LC interface for single-mode fiber over 1550 nm wavelength.
Typical reach of 70 km
SFP-GIG-LH401000Base-LH transceiver with an LC interface for single-mode fiber over 1310 nm wavelength.
Typical reach of 40 km
SFP-GIG-LX1000Base-LX transceiver with an LC interface for single-mode fiber over 1310 nm wavelength. Typical reach
of 10 km
SFP-GIG-SX1000Base-SX transceiver with an LC interface for multimode fiber over 850 nm wavelength.
Typical reach of 300 m
SFP-GIG-BX-D1000Base-BX bidirectional transceiver with an LC-type interface for use over single-mode fiber on a
single strand link up to 10 km point-to-point. Transmits 1490 nm and receives 1310 nm optical signal
SFP-GIG-BX-U1000Base-BX bidirectional transceiver with an LC-type interface for use over single-mode fiber on a
single strand link up to 10 km point-to-point. Transmits 1310 nm and receives 1490 nm optical signal
100 MEGABIT
TRANSCEIVERS
SFP-100-MM100Base-FX transceiver with an LC interface for multimode fiber optic cable
SFP-100-SM15100Base-FX transceiver with an LC-type interface for single-mode fiber optic cable up to 15 km
SFP-100-SM40100Base-FX transceiver with an LC-type interface for single-mode fiber optic cable up to 40 km
SFP-100-BX-U100Base-BX bidirectional transceiver with an SC-type interface for use over single-mode fiber on a single strand
link up to 20 km point-to-point, where the client (ONU) transmits 1310 nm and receives 1550 nm optical signal
SFP-100-BX-D100Base-BX bidirectional transceiver with an SC-type interface for use over single-mode fiber on a single strand
link up to 20 km point-to-point, where the client (OLT) transmits 1550 nm and receives 1310 nm optical signal
Alcatel-Lucent Omniswitch 6250
ALCATEL-LUCENT ENTERPRISE DATA SHE ET
8
Warranty information – OmniSwitch 6250 Lifetime Support
A Limited Lifetime Warranty is included in the purchase of your OmniSwitch 6250 product. This covers both the OmniSwitch 6250 hardware
and the related Alcatel-Lucent Operating System (AOS) software.
Hardware Limited Lifetime Warranty (LLW) Support
Hardware warranty is included with the OmniSwitch 6250 family. Limited to the original owner and/or the registered end user, this warranty
is provided for up to five years after the product’s end-of-sales announcement.
Note: Hardware Limited Lifetime Warranty does not cover transceivers.
Software Limited Lifetime Support
Limited Software Support is included with the OmniSwitch 6250 family as part of the warranty. Limited to the original product owner
and/or the registered end user, the support is provided for up to two years after the product’s end-of-sales announcement.
This service includes:
• Remote Technical support with our Switch Certified personnel
• Web and phone access to technical support
• Operating system software maintenance, minor and major releases
For more information about the OmniSwitch 6250 service and support programs, visit
http://enterprise.alcatel-lucent.com/?services=EnterpriseServices&page=directory.
enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other
trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the
property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its
affiliates assumes any responsibility for inaccuracies contained herein. (May 2015)
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.