Albion Unvented Calorifier Installation Guide
ALBION WATER HEATERS LTD
July 2002
Industrial Products Division
Unvented Calorifier
Installation Guide
I N D U S T R I A L PR OD UC TS D I V I S I O N
Unvented Calorifier Installation Guide
Albion Water Heaters Ltd
Shelah Road
Halesowen
West Midlands
UK
Telephone: + 44 (0) 121 585 5151 Fax + 44 (0) 121 501 3826
www.albion-online.co.uk E-mail: albion.sales@dial.pipex.co.uk
INTRODUCTION
Albion’s range of Unvented Calorifiers has been engineered to meet a
growing demand for pressurized hot water storage. These systems
can be fed either direct from the cold mains supply or via a cold
storage tank with a booster pump fitted.
The Calorifiers are supplied as either indirect or direct. The indirect is
fitted with an internal heat exchanger. This heat exchanger is either a
fixed coil or a removable U-Tube bundle type. The direct is heated
via electric immersion heater(s) or used as a buffer store unit.
This leaflet contains full details of installation and commissioning
instructions. Albion will also be happy to advise on any technical
matters. Information regarding these or other Albion products is
available direct from the company.
NOTE TO THE INSTALLER
The Calorifier(s) must be maintained and serviced annually to
maintain guarantees. Attached to every Unvented Calorifier is a
Benchmark logbook to be filled in by the installer and retain by the
owner of the system.
2222
Loading...