Alba L26M1, L32M1, L42M1 User Manual
Please keep for future reference
Instruction Manual
-
26”/32”/42” Digital LCD TV
EPG
YPbPr
Vol
DUAL
Instruction Manual
FAV
CH-LIST AD FREEZE
MENU
/EXIT
INFO
TABLE OF CONTENT
FOR YOUR SAFETY .......................................................................................... 2
PRECAUTIONS AND REMINDERS ............................................................. 3
IMPORTANT SAFETY INSTRUCTIONS ..................................................... 4
PACKAGE CONTENTS ................................................................................... 5
PREPARATION ................................................................................................... 6
ATTACHING THE BASE ........................................................................................................... 6
PREPARING YOUR LCD HDTV FOR WALL MOUNTING ............................................6
PERIPHERAL CONNECTION GUIDE ........................................................ 8
OPERATING INSTRUCTIONS ...................................................................... 9
TO USE THE FRONT PANEL CONTROL ...........................................................................9
TO USE THE REMOTE CONTROL .................................................................................... 10
VIEWING MODE ILLUSTRATIONS ................................................................................... 12
CONNECTING EQUIPMENT ............................................................................................. 13
TO USE THE MENUS .............................................................................................................. 19
PICTURE MENU ...................................................................................................................... 19
SOUND MENU ........................................................................................................................ 20
TV MENU .................................................................................................................................. 20
FEATURES MENU .................................................................................................................... 21
PARENTAL MENU ................................................................................................................... 22
COMMON INTERFACE MODULE..................................................................................... 23
OAD OPERATION.................................................................................................................. 24
TIPS ............................................................................................................................................. 25
PRODUCT SPECIFICATION ........................................................................26
BEFORE CALLING SERVICE ........................................................................28
GLOSSARY ........................................................................................................29
APPENDIX ........................................................................................................ 30
INFORMATION ............................................................................................... 32
PRODUCT GUARANTEE ............................................................................. 33
ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 0105 1
SYMBOL SYMBOL DEFINITION
DANGEROUS VOLTAGE: The lightning flash with arrowhead
symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s
SA 1965
enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
INSTRUCTIONS: The exclamation point within on
equilateral triangle to alert the user to the presence of
SA 1966
important operating and maintenance (servicing)
instruction in the literature accompanying the appliance.
Batteries installed warning
Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
FOR YOUR SAFETY
Before operating the TV please read this manual thoroughly. This manual should be retained for future
reference.
NOTICE
1. The changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the
emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. It is the responsibilities of the user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the TV to rain or moisture. Dangerously high voltages
are present inside the TV. Do not open the cabinet. Refer servicing to qualified personnel only.
ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 01052
PRECAUTIONS AND REMINDERS
Place unit on even surfaces.
Unplug immediately if is
malfunction like no picture,
no video/audio, smoke and
bad odor from TV.
Don't throw any object
inside the TV box like
metals or other flammable
materials.
Unplug immediately if other
foreign materials are put
inside TV box or if the TV
fell down.
Prohibit/Avoid opening TV
cabinet.
Remember to unplug the
AC cord from the AC outlet
before cleaning. Do not use
liquid cleaners or aerosol
cleaners to clean the display.
Do not cover or block
any vents and openings.
Inadequate ventilation
may shorten the life of
the display unit and cause
overheating.
Avoid direct sunlight, dusty,
high humidity and smoky
areas
.
Call service personnel to
clean the internal part of
the TV once a year.
Don't place the TV in
confined spaces or in a box
when using it.
Notice for Remote Controller
Avoid Dropping
3
2
1
6
5
4
9
8
7
0
ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 0105 3
Make sure to unplug the
unit when not in use for a
long period of time (days).
Avoid Liquids
3
2
1
6
5
4
9
8
7
0
Do not place the display
near water, such as bathtub,
washbasin, kitchen sink,
laundry tub, swimming pool
or in a damp basement.
Avoid Aerosol Cleaners
3
2
1
6
5
4
9
8
7
0
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturers
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and third grounding
prong. The wide blade or third prong is provided for your safety. When the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. The TV should be operated only from the type of power source indicated on the label. If you are not
sure of the type of power supplied to your home, consult your dealer or local power company.
14. Unplug this apparatus during lightning storms or when unused for long periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
16. The Class I apparatus shall be connected to a mains socket outlet with a protective earthing
connection.
17. The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
18. CAUTION – These servicing instructions are for use by qualified service personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
19. For use only with Listed Wall Mount Bracket with minimum weight/load: Please see page.26
20. Tilt/Stability – All televisions must comply with recommended international global safety standards
for tilt and stability properties of its cabinets design.
Do not compromise these design standards by applying excessive pull force to the front, or top,
●
of the cabinet, which could ultimately overturn the product
Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top
●
of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product
damage and/or personal injury.
ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 01054
21. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. Power Lines – An outdoor antenna should be located away from power lines.
23. Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the
antenna system is grounded to provide some protection against voltage surges and built up static
charges. Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information
with respect to proper grounding of the mats and supporting structure grounding of the lead-in
wire to an antenna-discharge unit, size of grounding connectors, location of antenna discharge unit,
connection to grounding electrodes and requirements for the grounding electrode. See Figure below.
ANTEN NA
GROUN D CLAMP
ELECT RIC SER VICE EQ UIPME NT
GROUN D CLAMP S
POWER S ERVIC E GROUN DING EL ECTRO DE SYST EM
ANTEN NA DISCH ARGE UN IT
GROUN DING CO NDUCT ORS
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note
to the CATV system installer: This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be connected to the 6 English grounding
system of the building, as close to the point of cable entry as practical. Please, make sure to
connect the power plug to the wall outlet socket after connecting the TV to the adapter!
24. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
25. Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the
equalizer to maximum increases the earphones and headphones output voltage and therefore the
sound pressure level.
PACKAGE CONTENTS
●TV unit
●Remote Control
●Two (AAA) Batteries for the Remote Control
●Power Cord
●User Manual
●Quick Setup Guide
ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 0105 5
PREPARATION
IMPORTANT: Do not apply pressure to the
screen display area which may compromise
the integrity of the display. The manufacturer’s
warranty does not cover user abuse or
improper installations.
ATTACHING THE BASE
IMPORTANT: The Base of the HDTV must
be assembled prior to usage.
1. Place TV unit face down on a soft and
flat surface (blanket, foam, cloth, etc.) to
prevent any damage to the TV.
2. Carefully align and insert the Base to
the stand.
For 26"/32"/42" model: Insert 3 screws
3.
for 26” model or 4 screws for 32"/42"
model to the bottom of the base and
tighten the base to the stand.
PREPARING YOUR LCD HDTV FOR
WALL MOUNTING
We suggest that you keep your TV at least 2.36
inches (60 mm) from the wall to prevent cable
interference.
Before mounting your TV on the wall, you need
to remove the base.
For your safety, please use listed wall mount
bracket with minimum weight of the TV
without stand. (Please see page.2 .)
To attach a wall mount bracket to your TV:
1 Loosen the screws holding your TV to
the stand and remove the stand base
from the TV.
2 Secure the wall mount bracket to the
back of your TV using four screws, as
indicated in the illustration.
For 26" model
200 mm
M4 screws
6
For 26"/32" model
For 42" model
ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 01056
100 mm
For 32" model
200 mm
200 mm
Power Key
For 42" model
NOTE
Wall mount bracket & screws are not
included.
Please make sure to connect the power plug
to the wall outlet socket after connecting the
TV to the power cord!
1. Install the base stand; place the TV on a
solid surface.
Min
1 m
Ensure that the TV is placed in a position
to allow free flow of air. Do not cover the
ventilation openings on the back cover.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles,
should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure
to rain or water. The equipment shall not
be exposed to dripping or splashing.
2. Connect the antenna cable or CATV cable
to the aerial socket TV ANTENNA at
the back of the TV set.
3. Remote control:
Remove the cover of the battery
compartment. Insert the 2 batteries
supplied (Type AAA 1.5V).
4. Power:
Insert the power cord in the wall socket
with AC power supply. You can see LED
states at the front panel. If the LED colour
is Blue, means the TV set is power on. If
the LED colour is Red, which means this
TV set is in standby state.
5. Turn the TV on:
Press the POWER key on the Remote
control or the side panel control knobs.
The TV will be turned on in a minute with
display on the screen.
ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 0105 7
PERIPHERAL CONNECTION GUIDE
26/32
26/32
42
COMMON INTERFACE (CI) – Conditional Access Module (CAM) use only. Please
①
⑨⑭
⑫⑫⑭
⑨
⑧ ⑬
⑦⑪⑩⑪⑧ ⑬
⑦⑩
AC POWER
SERVICE PORT
42
①
②
③
④
⑤
⑥
①
COMMON INTERFACE
R
②
AUDIO
L
③
④
VIDEO
SERVICE
PORT
⑤
⑥
⑮
HDMI 3
contact your service provider for details.
②、③、④
AV IN – Connect the primary source for composite video devices, such as a
VCR or video game. Use the white and red connectors to connect the external audio from
the same source.
SERVICE – Technician service use only.
⑤
Earphone Output – Connect to the headphones. When the headphone is inserted to the
⑥
PORT
plug, all the speakers will be muted.
TV ANTENNA – Connect to an antenna or digital cable (out-of-the-wall, not from Cable
⑦
Box) for Digital TV.*
⑧、⑬
SCART – Connect the video recorder or decoder to the television. Full SCART
transmits RGB, CVBS video in/out, and audio in/ out; HALF SCART transmits S-Video, CVBS
video in/out, and audio in/ out.
Note : SCART1/2 has monitor out. (CVBS/YPbPr/ATV/DTV)
PC IN – Connect the video and audio cables from a computer here.
⑨
COMPONENT (Y/Pb/Pr with Audio L/R) – Connect the primary source for
⑩
component video devices such as a DVD Player or set top box here.
SPDIF (Digital Audio Out) – When a digital audio signal is associated with the input
⑪
selected for viewing, the digital audio will be available on this SPDIF connection to your
home theatre system.
⑫、⑭、⑮
HDMI – Connect the primary source for digital video such as a DVD multimedia
player or set top box through this all digital connector.
Once your equipment is connected, use the following procedure to view the input signal:
Press the SOURCE button on the remote controller to select the relevant source to view. (ex: Press
YPbPr button to select “YPbPr” if you have connected a video recorder to Component socket.)
ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 01058
OPERATING INSTRUCTIONS
TO USE THE FRONT PANEL CONTROL
1 VOL + VOL +: Press to increase the sound volume level.
1
2
3
4
5
6
7
2. VOL - VOL - : Press to decrease the sound volume level.
3. CH
4. CH
5. MENU Menu key: Press to open or exit the OSD (on-screen display) menu.
6. INPUT Input key: Press to select the input source.
7.
▲
▼
i POWER
CH ▲: Press to select the next higher Programme number.
CH ▼: Press to select the next lower Programme number.
Power key: Press to turn on / off (standby) the TV set. (Press to turn on
TV after the power on status, LED had changed to the Blue colour and
stopped flashing.)
ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 0105 9
TO USE THE REMOTE CONTROL
POWER
Press to turn ON/OFF
(standby) the TV.
SOURCE
Press repeatedly to choose the
various input sources.
Number buttons
Press to enter TV channel
number to select channel.
EPG
Press to display the Electronic
Programme Guide.
PRE CH
Press to display the previous
channel.
HDMI
Press to choose HDMI source
mode.
YPbPr
Press to choose YPbPr source
mode.
VIDEO
Press to choose AV source
mode.
PC
Press to choose PC source
mode.
VOL+ / VOL-
Press + or - to adjust the
volume.
/ CH
CH
Press or to browse
through the TV channels.
MUTE
Switch the sound ON/OFF.
EPG
YPbPr
Vol
DUAL
MENU
/EXIT
FAV
CH-LIST AD FREEZE
INFO
ZOOM
Select the display aspect from
Auto, Normal (4:3), Wide
(16:9), subtitle, full screen, or
14:9 mode.
DUAL
Press to select from mono,
stereo, Dual I, or Dual II.
AUDIO ADJ
Press to choose from Personal,
Speech, Music.
VIDEO ADJ
Press to choose the Smart
Picture mode from Personal,
Standard, Movie, Vivid, Eco.
SLEEP
Press to set the preset time to
switch the TV to standby mode
automatically.
MENU/EXIT
Press to open or close menu.
▲, ▼, ◄, ►
, OK
Press to adjust or confirm the
various function items on the
menu.
INFO
Press to display or close the
information screen.
Colour buttons
• In TV mode: Follow the
directions in the OSD
screen.
• In Text mode: Text control
buttons.
ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 010510
Loading...