Alba BUS-236-207O-GB-3B-E, BUS-236-207O-GW-GP-3 Instruction manual

24” LED TV

Instruction manual

Cat Number: 820/8732 (Black), 819/5003 (Pink), 804/8545 (White)

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 1ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 1 04/12/2017 16:17:3904/12/2017 16:17:39

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 2ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 2 04/12/2017 16:17:4404/12/2017 16:17:44

Important Guarantee Information

___________________________________________

____________________________________________

___________________________________________

Congratulations on purchasing this television. We hope you have many years of trouble free enjoyment from
your purchase.

Your product is covered under the manufacturers guarantee for 12 months from the date of purchase.

If you experience any difficulties with your TV, please refer to the ‘Frequently asked questions’ section
in this user guide.

If you are still unable to remedy the issue, try resetting the TV to factory settings. (Details in the ‘Settings menu’
section of this user guide). Alternatively you can contact the helpline on the number below.

In the event that a fault is diagnosed, the helpline will arrange to collect the TV from your home

or work address, return it to our service centre, repair the item and then return it to you.

If we believe we cannot offer a permanent repair, we will replace the item.

Helpline Information

Helipline 0345 604 0105

The Helpline is open 8am-7pm Monday to Saturday & 10am-4pm Sunday. (Calls are charged at the standard rate

of your network provider.)

You must retain all packaging materials, in addition to your proof of purchase/receipt, as you will need these in the
event of warranty/service support.

This guarantee is in addition to and does not affect your statutory rights.

If you need to call the helpline, you will need the following information.

1) Model Ref

2) Date of purchase

3) Serial Number

___________________________________________ (You can find this on the rear of the TV)

____________________________________________ (You can find this on your sales receipt)

___________________________________________

(You can find this on the rear of the TV)

EXAMPLE OF LABEL ON REAR OF TV

Model Ref

Serial No.

This TV is for domestic use only

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 3ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 3 04/12/2017 16:17:4404/12/2017 16:17:44

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

4

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 4ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 4 04/12/2017 16:17:4404/12/2017 16:17:44

Contents

Safety information

1

Safety information 8-11

Getting to know your TV

2

Accessories 14

Stand installation 15

Detaching the stand 16

Securing the TV with anti-tip straps 16

Wall mounting 17

TV buttons 18

Remote control 19

Connections

3

TV buttons and input source 22

TV connections 23-24

Advanced features

5

7 day TV guide 36

USB media player 37

USB Record 38-39

DVD setup 40

Product support

6

Connecting a sky digital set top box 44-45

Frequently asked questions 46-47

Technical specification 48-49

Alba warranty information 50

Standard features

4

How to navigate the menus 28

Channel menu 29

Picture menu 30

Sound menu 31

Time menu 32

System/hotel lock menu 32

Settings menu 33

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

5

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 5ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 5 04/12/2017 16:17:4404/12/2017 16:17:44

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 6ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 6 04/12/2017 16:17:4404/12/2017 16:17:44

1Safety information

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 7ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 7 04/12/2017 16:17:4404/12/2017 16:17:44

Safety information

Important - Please read these instructions fully before

installing or operating

Warnings

• Television sets with 40” screens or more must be
lifted and carried by at least 2 people.

• This television does not contain any parts that are
serviceable by the user. In case of a fault, contact
the manufacturer or authorised service department.
Exposing the internal parts inside the TV may
endanger your life. The manufacturers guarantee
does not extend to faults caused by repairs carried
out by unauthorised third parties.

To prevent the spread of fi re, keep
candles or other open fl ames away
from this product at all times

• Do not use TV set immediately after unpacking. Wait
until TV warms up to the room temperature before
using it.

• To reduce the risk of fire, electric shock or damage
to the TV, do not expose it to dust, rain or moisture.
Never expose the TV to dripping or splashing and
do not place objects filled with liquids on or near
the TV.

• Do not connect any external devices (DVD player,
games console etc) when the TV is switched on.
Disconnect both the TV and device from the mains
before connecting. Only switch appliances on
when the connection process is complete.

• Do not place the television in a confined space and
do not obstruct the ventilation openings at the rear
of the television.

• When installing on a wall, ensure the TV is at
least 5cm from the wall for ventilation.

• Always ensure that the TV’s ventilation openings
are not covered with items such as newspapers,
table-cloths, curtains, etc.

• Dispose of this television and any components
including batteries in an environmentally friendly
manner. If in doubt, please contact your local
authority for details of recycling.

• Ensure this TV is used in moderate climates only.

• In case of electrostatic discharge (ESD) the TV may
display incorrect functions. In such case, switch
the TV off and switch the TV back on. The TV will
work normally.

WARNING: Never place a television set on an
unstable location. A television set may fall, causing
serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking
simple precautions such as:

• Use cabinets or stands recommended by the
manufacturer of the television set.

• Only use furniture that can safely support the
television set.

• Ensure the television set is not overhanging the
edge of the supporting furniture.

• Do not place the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.

• Do not place the television set on cloth or other
materials that may be located between the
television set and supporting furniture.

• Please educate children about the dangers of
climbing on furniture to reach the television set or
its controls.

• If your existing television set is being retained and
relocated, the same considerations as above should
be applied.

Safety

• For your safety, this appliance is fitted with a fused
3 pin mains plug. Should the fuse need to be
replaced, ensure that any replacement is of the
same amperage and approved with the BSI mark.

• Never try and replace the mains plug unless
you have adequate qualifications and are legally
authorised to do so. In the event that a replacement
mains cable is required, contact the manufacturer
for a suitable replacement.

• Never use the television if it is damaged in any way.

• Always place the television on a flat level surface
avoiding anywhere which may be subject to
strong vibration.

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Safety information8

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 8ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 8 04/12/2017 16:17:4404/12/2017 16:17:44

Safety information

Important - Please read these instructions fully before

installing or operating

• The ideal distance to watch the television is
approximately five times the length of the diagonal
measurements of the TV screen.

• Ensure the television is not placed on top of the
power cable as the weight of the television may
damage the cable and cause a safety hazard.

• Never place mobile phones, speakers or any
other device which may cause magnetic or radio
interference, near the television. If interference is
apparent, move the device causing the interference
away from the television.

• To disconnect the set from the mains, remove the
mains plug from the socket.

• Ensure that the mains plug is always easily
accessible.

WARNING: Excessive noise when using earphones
and headphones can cause loss of hearing.

Maintenance

• To clean your TV, wipe with a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth dipped
in a soap and water solution or a weak detergent
solution.

• Never use alcohol, paint thinner or benzene to
clean this unit.

• Before using a chemically treated cloth, read the
instructions that came with the cloth carefully.

CAUTION: If water or other liquid enters the
television through the display panel surface,
a malfunction may occur.

Important information regarding use of video games,
computers, captions or other fixed image displays

• The extended use of fixed image program material
can cause a permanent “shadow image” on the
LCD/LED panel, also known as “screen burn”.

• This “shadow image” can appear in the background
during normal viewing. This type of irreversible LCD/
LED panel deterioration can be limited by observing
the following steps:

• 1. Reduce the brightness/contrast setting to a
minimum suitable viewing level.

2. Do not display the fixed image for extended
periods
of time.

3. Turn the power off when not in use.

• Examples of images that are more likely to cause
“screen burn” are as follows (this is not an exhaustive
list):

• TV channel logos: e.g. shopping channel logos and
pricing displays - especially if they are bright and
stationary. Moving or low-contrast graphics are less
likely to cause ageing of the screen.

• Time displays.

• Teletext: Do not view a stationary page for a long
period of time

• TV/DVD menus: e.g. listings of DVD disc content.

• Pause mode: Do not leave the TV in pause mode
for long periods of time, e.g. when watching DVDs
or videos.

Important: Once ‘shadow image/screen burn’
occurs, it will never disappear and is not
repairable under warranty.

Packaging

• The safest way to transport your item is in the
original box/packaging - please save your packaging
for this.

• You will need the original box/packaging in the
event of warranty/service repair or support. We
are unable to carry out warranty/service if you are
unable to package the item correctly.

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

Safety information 9

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 9ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 9 04/12/2017 16:17:4404/12/2017 16:17:44

Safety information

Important - Please read these instructions fully before

installing or operating

Disposal

UK: Waste electrical products should not
be disposed of with household waste. Please dispose
of the product at a designated collection point for
recycling of WEEE. For your nearest facilities, please see
www.recycle-more.co.uk or in store for details.

ROI: Waste electrical products should not be disposed
of with household waste. Separate disposal facilities
exist. Check with your local authority or retailer for
recycling advice.

Batteries

• Do not expose batteries to high temperatures,
excessive heat, prolonged sunshine or fire as this
may cause leakage, explosion or ignition.
Observe the correct polarity when inserting
batteries.

Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing, LLC in the
United States and other countries.

The “CI plus” Logo is a trademark of CI Plus LLP.

• Do not use different types of batteries together or
mix old and new batteries.

• Dispose of batteries in an environmentally
friendly way.

• Certain regions may regulate the disposal of
batteries. Please consult your local authority.

Trademarks

HDTV 1080p

The “HD TV 1080p” Logo is a trademark of
DIGITALEUROPE.

FREEVIEW HD

The FREEVIEW HD words and logos are trade marks of
DTV Services LTD. © DTV Services Ltd.

SAORVIEW

SAORVIEW is a registered trademark owned by RTÉ.

DVB

The DVB logo is the registered trademark of the Digital
Video Broadcasting - DVB – project.

For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
TruSurround is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.

Hereby, Universal Media Corporation l.t.d. declares
that this LED TV is in compliance with the essential
requirements and other relevant provisions of
RED Directive 2014/53/EU.

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 10ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 10 04/12/2017 16:17:4404/12/2017 16:17:44

TV Models with built in DVD players

CAUTION:

CLASS 1
LASER PRODUCT

This unit is a class 1 laser product. This unit uses a visible laser beam which could cause hazardous radiation
exposure if directed. Be sure to operate the player correctly as instructed.

When this unit is plugged into the wall outlet, do not place your eyes close to the openings to look into the
inside of this unit.

Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.

Do not open covers and do not repair yourself. refer servicing to qualified personnel.

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 11ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 11 04/12/2017 16:17:4504/12/2017 16:17:45

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 12ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 12 04/12/2017 16:17:4504/12/2017 16:17:45

Getting to know your TV

2

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 13ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 13 04/12/2017 16:17:4504/12/2017 16:17:45

Getting to know your TV

You’ll be up and running in no time

Accessories

1 x User guide 1 x Remote control & 2 x AAA batteries

User Guide

1 x Quick start guide

QSG

1 x TV

1 x RF cable

1 x Stand installation pack

3 x M(4x12)

1 x Mini Component / YPbPr Cable

1 x mini-AV Cable

4 x ST(4x12)

Note: Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package
your item in the event of warranty/service repair is in it’s original box/packaging.

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

14

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 14ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 14 04/12/2017 16:17:4504/12/2017 16:17:45

Getting to know your TV

Getting to know your TV

You’ll be up and running in no time

Stand installation

To complete the stand installation you will require a cross head screw driver.

3 x M(4x12)

4 x ST(4x12)

1

fig 1) Attach the stand neck to the rear of the TV set.

3 x
M (4x12)

2

fig 2) Secure the neck to the TV using the 3 x M (4x12)
screws provided.

4 x ST (4x12)

1 1/2

3

fig 3) Peel off the protective plastic cover then attach
the stand base to the neck.

Helpful advice for first time stand installation

When securing the self-tapping screw/s into the base of the TV (on first installation) the screw/s may be naturally
tight as they create a thread in the plastic.

a) Ensure the cross head screw driver tip fits correctly into the head of the screw and that it is not too big or small.

b) Screw in all screws individually and partially before tightening all of the screws fully.

c) If the screws become very tight try loosening and re-tightening, this will continue the process of creating
the thread.

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 15ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 15 04/12/2017 16:17:4704/12/2017 16:17:47

4

fig 4) Secure the base to the neck using the 4 x ST
(4x12) screws provided.

Getting to know your TV 15

Getting to know your TV

You’ll be up and running in no time

Detaching the stand

To detach the stand please remove the 3 screws highlighted then remove the stand feet from the rear of
the TV set.

3 x
M (4x12)

Securing the TV using anti-tip straps

For maximum security in the home, when using a TV with its stand, anti-tip straps should be fitted. These are
available from supermarket websites and other websites and are an easy, inexpensive and effective way of ensuring
your TV stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered to the wall
or the furniture the TV is stood on, these are fitted as follows.

NOTE: Please ensure that children do not climb on the TV set.

A) Using one or both of the top wall-mounting holes and screws fasten one end of the fastening cord/s to the TV.

(the screws are already supplied in the wall mounting holes)

B) Secure the other end of the fastening cord/s to your wall. (you will need screws/fixings suitable for your wall
type - available separately from most DIY stores.

The Royal Society for the Prevention of Accidents is urging people to take care with flat-screen televisions.

RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling flat-screen televisions on to themselves.
They are unsteady on their feet and are attracted by colourful television images.”

The risk is increased as televisions become lighter.

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

16

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 16ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 16 04/12/2017 16:17:4804/12/2017 16:17:48

Getting to know your TV

Getting to know your TV

You’ll be up and running in no time

Wall mounting

IMPORTANT: Before drilling any holes in the wall ensure you are not drilling where there could be any electric

wires, water or gas pipes.

1) Remove the four screws located at the back of the TV set.

2) The wall mount can now be easily attached to the
mounting holes, located on the back of the TV, using the
same four screws removed.

IMPORTANT : If wall mounting this TV, only use the screws already provided in the wall mounting holes. Using
other screws which are longer could cause irreparable damage to internal parts.

For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards so that the
TV’s screen is ‘face on’. See fig 1 and 2 below.

fi g 1

INCORRECT

Viewing angle

TV

CORRECT

fi g 2

Viewing angle

TV

For VESA wall mounting information please refer to the Technical Specification page.

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

Getting to know your TV 17

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 17ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 17 04/12/2017 16:17:4804/12/2017 16:17:48

Getting to know your TV

You’ll be up and running in no time

TV buttons and input source

For models with built in
DVD player

STANDBY

1) Stop/Eject DVD

2) Play/Pause DVD

3) Volume up and menu right

4) Volume down and menu left

5) Programme/Channel up and menu up

6) Programme/Channel down and menu down

7) Displays Menu/OSD

8) Displays the input source menu

9) Standby Power On/Off

1

2

3

4

5

6

7

8

9

Choosing mode and input/source

To switch between the different input/connections.

A) Using the buttons on the remote control:

1) Press [SOURCE] - The source menu will appear.

2) Press [\/] or [/\] to select the input you require.

3) Press [OK].

B) Using the buttons on the Television:

1) Press [SOURCE].

2) Scroll up / down using CH+/ CH- buttons to the

input/source you require.

3) Press Vol+ to change input/source to the one

selected.

For further information on input/connections please
view ‘Connections’ pages.

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Example of Source menu depending on the TV model

18

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 18ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 18 04/12/2017 16:17:4904/12/2017 16:17:49

Getting to know your TV

Getting to know your TV

You’ll be up and running in no time

Remote control functions

For Models with Integrated DVD players
For Models with PVR Function
For Models with USB Playback
For Models with 3D Feature

1) STANDBY

2) MUTE

3) DTV

4) RADIO

5) DVD

6) USB

7) NUMBER BUTTONS

8) TV GUIDE

9)

- To return to the previous channel viewed

10) P.MODE - Scrolls through picture mode options

11) VOL

12) CH

13) S.MODE - Scrolls through sound mode options

14) FAV - To display favourites menu

15) MENU

16) EXIT

17)

menus and adjust the system settings to your preference

18) SOURCE/AV

19) INFO - Press once for now/next channel

information. Press twice for programme information
about current programme

20) ASPECT

21) SLEEP

22) SUBTITLE

23) AUDIO

24) TEXT

25) TEXT HOLD

26) DISPLAY

27) TEXT ZOOM/DVD ZOOM

28) DVD Menu/Record:

- To restart the current chapter

- To advance forward to the next chapter

- To stop/eject Disc (hold for 4 seconds to eject disc)

- To play in fast rewind mode

- To play in fast forward mode

- To play/pause

29) REC LIST

30) GOTO

31) A-B

32) REPEAT

33) ANGLE/

- Allows you to navigate the on-screen

3D - Change to 3D mode

12

53

4

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20 22
21 23

24

26

25 27

28

29

30
32

31
33

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

Getting to know your TV 19

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 19ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 19 04/12/2017 16:17:4904/12/2017 16:17:49

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 20ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 20 04/12/2017 16:17:5004/12/2017 16:17:50

Connections

3

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 21ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 21 04/12/2017 16:17:5004/12/2017 16:17:50

Connections

Bringing it all together

Connections

ETHERNET/LAN Network connection

1

COMPONENT (HD) Component input (YPbPr)

2

AV IN Audio Video input

3

SCART SCART input

4

HDMI 1 (ARC) HDMI input

5

HDMI 2 HDMI input

6

RF IN RF / TV aerial input

7

Optical audio out Digital audio output

8

USB 2.0 USB input

9

CI CARD IN Common Interface module

10

EARPHONE Earphone socket

11

*The Ethernet port is used only for Freeview HD services only.

1

2

3

8

45

9

10

11

6

7

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Connections22

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 22ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 22 04/12/2017 16:17:5004/12/2017 16:17:50

Connections

Bringing it all together

Connections

Connecting a camcorder, camera or games console.

The TV source should be set to composite/AV.

AV in

Connecting a DVD player/recorder, video recorder or cable/satellite box.

L (white)

R (red)

Video
(yellow)

Source should be set to SCART..

Scart

Scart

Connecting a High Definition (HD) Device Option 1 - via HDMI to HDMI cable

A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio with
minimal loss of quality.

TVs Source should be set to the corresponding HDMI Port (HDMI 1, HDMI 2, etc).

HDMI HDMI

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

Connections 23

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 23ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 23 04/12/2017 16:17:5004/12/2017 16:17:50

Connections

Bringing it all together

Connections

Connecting a High Definition (HD) Device Option 2 - via Component cable

If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors you must
connect via Component (for picture) and by phono cable (for sound).

TV Source should be set to Component/YPbPr.

Y (green)
PB (blue)

YPbPr

AV in

Video (yellow)
is not connected

PR (red)

L (white)
R (red)

Connecting to an external audio device (Amplifiers, Surround Sound, Sound Bars etc)

When connecting via the TV’s 3.5mm Earphone output, this will disable the TV speakers.

There are two options when connecting a device via the 3.5mm Earphone Output.

3.5mm

earphone

Digital

audio

out

(optical)

OPTION 1 for 3.5mm EARPHONE Output

OPTION 2 for Digital Optical Audio Output

3.5mm
audio

in

Digital

audio

in

(optical)

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Connections24

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 24ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 24 04/12/2017 16:17:5004/12/2017 16:17:50

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 25ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 25 04/12/2017 16:17:5004/12/2017 16:17:50

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 26ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 26 04/12/2017 16:17:5004/12/2017 16:17:50

Standard features

4

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 27ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 27 04/12/2017 16:17:5104/12/2017 16:17:51

Standard features

Simple everyday use

How to navigate the menus

To access this menu, press [MENU] button on the
remote control. To enter a menu press [OK]

If you wish to make changes to any of the default
settings, use the scroll
any settings press [OK] button.

To exit this menu at anytime, press [EXIT] button.

buttons. To confirm

Tip: If you do not press any buttons for 30 seconds,
the menu will automatically exit. You can change the
length of time before the menu exits automatically -

see ‘OSD Timer’ in the Time Menu.

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Standard features28

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 28ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 28 04/12/2017 16:17:5104/12/2017 16:17:51

Standard features

Simple everyday use

Picture menu

Picture Mode

• Dynamic - Recommended settings for fast

moving pictures.

• Standard - Default settings.

• Movie - Set to be lighter in colour and less

bright.

• Personal - Lets you manually alter all the settings.

• Economy - Power saving mode which reduces the

energy used by up to 25% (by reducing the power
to the LED/LCD panel). In Economy mode, the TV
will switch itself to Standby mode after 3-5 hours
in the event that the TV buttons or remote control
buttons are not pressed (change the picture mode
to another setting to de-activate this function).

Contrast - Switch the balance between black and
white.

Brightness - Increase or decrease the brightness of
the picture.

Aspect Ratio - Within the UK the picture format varies
depending on the channel/broadcast. There are a
number of different options to best meet your needs.

• Auto - Automatically displays the best picture
format. So the picture is in the correct position.
May have black lines at the top/bottom and/or
sides.

• Orignal - Will display the picture from the
broadcaster without any change

• 4:3 - Displays the 4:3 picture in its original size.
Side bars are shown to fill the 16:9 screen.

• 16:9 - Fills the screen with a regular 16:9 signal and
4:3 will stretch to fill the screen.

• Zoom - The picture is the correct proportion but
zoomed in to fill the screen.

Expert settings - additional settings.

Noise Reduction - switch noise reduction ON/OFF.

Colour - Increases the colour from black and white.

Tint - Lets you increase or decrease the level of tint

within the picture (only available in VGA/PC source
mode).

Sharpness - Increase or decrease the sharpness of
the picture.

Colour Temperature

• Normal - Default settings.

• Warm - Increases red within the picture.

• Cool - Increases blue within the picture.

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 29ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 29 04/12/2017 16:17:5104/12/2017 16:17:51

Active Contrast - Automatically optimises the
‘backlight’ and ‘contrast’ of the picture according
to the brightness of the screen. Choose one of the
following presets: low, middle, high and Off.

Standard features 29

Standard features

Simple everyday use

Sound menu

Sound Mode

• Standard - Default settings.

• Music - Emphasises music over voices.

• Movie - Provides live and full sound for movies.

• Sports - Emphasises sound for sports.

• Personal - Selects your personal sound settings.

Treble - To adjust the amount of high frequency within

the sound.

Balance - To switch the so und between the left and
right speakers.

Auto Volume Level (AVL) - When ‘on’ is selected,
the volume will stay at a constant level regardless of
input/source.

DTS TruSurround Sound

• OFF - Off.

• ON - TruSurround HD™ creates an immersive,

feature-rich surround sound experience from two
speakers, complete with rich bass, high frequency
detail and clear dialog.

Digital Output

• Off - Off.

• Auto - Selects the best settings automatically.

• PCM - Select this option if you are connecting

to a Stereo Hi-fi via coax cable (Pulse-code
modulation (PCM) is a digital representation of
an analogue signal).

Audio Description - This allows the user to increase
and decrease the AD (Audio Description) volume level.
(Audio Description is a service available on certain
programmes. It provides a description of what is
happening during the selected programme for a
person who is visually impaired).

AD Volume - This allows the user to increase and
decrease the AD (Audio Description) volume level.

Audio Delay (ms) - Enables the user to adjust setting to
sync picture and audio.

SPDIF Delay ­to sync picture and audio for external speakers
connected via digital audio output.

Tip: Treble and bass levels can only be adjusted
when the sound mode ‘personal’ is selected.

Enables the user to adjust sound setting

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Standard features30

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 30ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 30 04/12/2017 16:17:5104/12/2017 16:17:51

Standard features

Simple everyday use

Channel menu

Auto Tuning - Allows you to retune the television
for all digital channels, digital radio stations and
analogue channels.

Analogue Manual Tuning - Allows you to manually
tune your analogue signal.

Freeview Manual Tuning - Allows you to manually
tune your digital signal.

Channel Edit - Allows you to delete, move, skip and
add favourite channels.

Signal Information - Displays signal strength
information.

CI Information - Pay per view services require a
“smartcard” to be inserted into the TV. If you subscribe
to a pay per view service the provider will issue you
with a ‘CAM’ and a “smartcard”. The CAM can then
be inserted into the COMMON INTERFACE PORT
(CI Card In).

Record list - Lists your recorded programmes

Schedule List - Lists your programme reminders.

OAD - Switch on/off OAD (over air download) software

updates

.

Tip: If you do not press any buttons for 30 seconds,
the menu will automatically exit. You can change the
length of time before the menu exits automatically -

see ‘OSD Timer’ in the Time Menu.

.

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

Standard features 31

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 31ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 31 04/12/2017 16:17:5104/12/2017 16:17:51

Standard features

Simple everyday use

Time menu

Auto Sync - ON/OFF - Automatically sets date and
time.

Clock - Shows the date and time.

Off Time - Allows you to set a specific time for your TV

to turn off.

On Time - Allows you to set a specific time for your TV
to turn on, the channel it will then display, the source it
will be on and also the volume. This function can then
be toggled to repeat every day or a certain day.

Sleep Timer - Lets you set the sleep timer so the
television automatically switches off after a set amount
of time. Off -> 10min -> 20min -> 30min -> 60min ->
90min -> 120min -> 180min -> 240min.

OSD Timer - Lets you adjust the amount of time
the On Screen Menu stays on the screen before
disappearing.

Auto standby - Set Auto standby between 3 hours, 4
hours and 5 hours ( to turn off this function you must
exit Home Mode in the Picture Menu).

System/Hotel lock menu

System/Hotel Lock - Allows you to lock or unlock the
menu. You will be asked to enter a 4 digit password use
the button to quit the password input. Use the
button to clear. Default password is 0000.

Change Password - Allows you to change the
password.

Channel Lock - Allows you to lock certain channels
manually.

Parental Guidance - Allows you to set the rating to
block certain content based on age information.

Key Lock - Allows you to lock the buttons on the side
of the TV set.

Default Source - Allows the user to set the default
source. The default source is the source the TV starts
on when first switched on.

Default Channel - Allows the user to set a channel as
the default channel on the Digital source. The default
channel is the channel the TV starts on when first
switched on.

Time Zone - Change your current time zone.

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Standard features32

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 32ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 32 04/12/2017 16:17:5104/12/2017 16:17:51

Max Volume - Allows you to adjust and set the
maximum volume.

Source Lock - Allows you to lock the source menu.

Standard features

Simple everyday use

Settings menu

SETUP menu - select from the following options:

Language - Allows you to change the language of

the menu.

Audio language 1 - Select your preferred primary
audio language.

Audio language 2 - Select your preferred
secondary audio language.

Subtitle Language 1 - Select your preferred
primary subtitle language

Subtitle Language 2 - Select your preferred
secondary subtitle language

Hearing Impaired - This allows the user to turn
on the Hearing Impaired function, this produces
subtitles on the screen which provide a description
of what is happening during the selected program..

Blue Screen - Changes the background when
there is no input between clear and a blue
background (Only available on some sources).

NETWORK menu - select from the following options:

IP config - Allows you to access LAN network

connection settings. Choose from the following
options:

Auto: Will automatically connect the TV to your
home network (this is the default setting and is
highly recommended).
Manual: Allows you to manually change the IP,
Netmask, Gateway and DNS information.

Network info - Allows you to view Information
about network settings.

Network test - Allows you to test the network
connection.

PVR File System - Allows you to view the format and
performance of a USB key.

HDMI CEC (Consumer Electronic Control) - Allows
HDMI devices to control each other and allows the
user to operate multiple devices with one remote
control. (only available with compatible devices).

Software Update (USB) - This menu lets you install
the new software/firmware onto the television.
Further details of how to do this will be issued with the
firmware. Contact the helpline or refer to the ‘product
support’ section of the website.

Software Update (NET) - Allows you to update
your TV with the newest software via your
internet connection.

Version Info - Allows you to view the version/
information of the software installed on the TV set.

LED Status - Allows the user to switch the LED
Power indicator light ON or OFF, when the TV is
being operated.(When this option is set to OFF
the LED Power indicator light will flash when the
remote control is used).

First Time Installation - Allows you to retune
the television for all digital channels, digital radio
stations and analogue channels.

Reset TV - This resets the menus to factory
settings and will erase all TV channels stored on
the television.

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

Standard features 33

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 33ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 33 04/12/2017 16:17:5104/12/2017 16:17:51

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 34ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 34 04/12/2017 16:17:5104/12/2017 16:17:51

Advanced features

5

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 35ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 35 04/12/2017 16:17:5104/12/2017 16:17:51

Advanced features

Getting the most from your TV

7 day TV guide and channel list

TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported
by the freeview channel). You can view the start and end time of all programmes and on all channels for the next 7
days and set reminders.

1) Press [TV GUIDE]. The following 7 Day TV Guide will appear.

2) Navigate through the menu using

You can now:

Record a programme by pressing RED
View a previous day by pressing GREEN
View the next day by pressing YELLOW
Set a reminder by pressing BLUE

3) Press [EXIT] to exit the 7 day TV Guide.

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Advanced features36

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 36ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 36 04/12/2017 16:17:5104/12/2017 16:17:51

Advanced features

Getting the most from your TV

USB media player

USB mode offers playback of various different types
of content that you have saved on your USB Memory
Stick.

On switching to USB source the menu screen will
appear. The content will be divided into Photo, Music,
Movie and Text based on file type.

1) You can navigate through the menus using the scroll
buttons. To confirm the item you wish to play/

view press [OK] button.

2) Select the drive you require.(If your drive only has 1

partition you will only see 1 item).

3) You can now access the item. Press OK to view.

4) While viewing you control the item using (Fig A).

or by pressing ( i ) and using

Tip: If you experience a playback issue, please
ensure the files being used are the correct format
(example - the picture plays but no sound)

and (OK).

1)

2)

3)

For the best performance, do not use USB
extension cable. See technical specifi cation page
for compatible fi le types.

4)

Fig A

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

Advanced features 37

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 37ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 37 04/12/2017 16:17:5104/12/2017 16:17:51

Advanced features

Getting the most from your TV

USB record - Freeview/Soarview mode

USB record – Freeview/Saorview mode

Built into this television is a USB record facility. This function is available in Freeview/Soarview mode
when used in conjunction with a compatible USB memory stick or USB hard drive. The benefits of this are as
follows:

• Pause live TV and then playback, fast forward and rewind (up to live TV)

• One button record, if you decide you want to record the current programme

• Easy programmable recording from the 7 day TV Guide

Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads

from and writes to the memory stick at the same time, some memory sticks may not be suitable).

You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection

of tested and compatible memory sticks available to purchase directly from the helpline/web site.

Recommended Minimum Specification - USB Memory Stick

Read Speed: 20 Mb/s (MegaBit Per Second)

Write Speed: 6 Mb/s (MegaBit Per Second)

If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear of this
user guide.

Pause Live TV (Time Shift)

Pausing Live TV is very simple.

- Press the play/pause button and the television will pause and the live content will be recorded. To resume

watching press play/pause again.

- Press fast forward to go forward in a recording (i.e. to skip adverts).

- Press fast rewind to go back in a recording (i.e. if you fast forwarded

too far).

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Advanced features38

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 38ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 38 04/12/2017 16:17:5204/12/2017 16:17:52

Advanced features

Getting the most from your TV

Tip: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart time shift
you must press play/pause button.

One Button Record

At any point in time you may decide to record the current programme that you are watching. To do this you need
to press the red button highlighted below.

Playback files from Record list

To playback recorded files you will be required to have the TV set to the Freeview/Saorview source mode. Once
set to the correct source, access the recorded list by pressing the REC LIST (Recorded List) button on the remote
control, the recorded list should now appear on the screen, press OK on the chosen file to start.

Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or record
one channel while the television is in standby mode.

Note: USB record function is only available in Digital/Freeview TV mode. Due to copyright laws and illegal
copying/recording it is not possible to record to/from any other input/output source.

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

Advanced features 39

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 39ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 39 04/12/2017 16:17:5204/12/2017 16:17:52

Advanced features

Getting the most from your TV

DVD setup

TV Display - Choose from the following options

4:3 Pan Scan PS Traditional picture format, often used on old fi lm

4:3 Letter Box LB Traditional picture which has been adapted for widescreen

Wide 16:9 Widescreen picture format

Speaker Setup - Choose from the following options

LT/RT Converts from multi-channel sound to mono

Stereo Converts from multi-channel sound to Stereo

Dual Mono - Choose from the following options

Stereo Outputs 2 channels of sound both left and right

Mono L Outputs left side sound

Mono R Outputs right side sound

Mix Mono Outputs a single channel of sound but mix between right and left

Dynamic Range - This is the difference between the quietest and loudest sounds. This setting works only with DVD discs
recorded in Dolby digital.

Full Set this to listen with the range recorded on the disc

3/4 Set this to listen with a range equivalent to a normal television

1/2 Set this to listen with a smaller di erence between the maximum and minimum volume

1/4 Set this to listen with a smaller di erence between the maximum and minimum volume

O Set dynamic range to o

TV Type - Choose from the following options

PAL For discs from UK/Europe, Asia, Australia etc

Multi For both NTSC and PAL

NTSC For discs from North America, Japan etc

Default - Choose from the following options

Reset Resets all options in the ‘DVD setup’ menu back to the default settings

Tip: This TV/DVD player is pre-set to play Region 2 DVDs. In the event you wish to use the TV/DVD in
another country that uses different region discs, please visit www.umc-uk.co.uk. Select ‘Product Support’,
‘Changing Region’.

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Advanced features40

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 40ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 40 04/12/2017 16:17:5204/12/2017 16:17:52

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 41ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 41 04/12/2017 16:17:5204/12/2017 16:17:52

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 42ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 42 04/12/2017 16:17:5204/12/2017 16:17:52

Product support

6

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 43ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 43 04/12/2017 16:17:5204/12/2017 16:17:52

Product support

Help is always at hand

Connecting a sky digital set top box

Using a Sky Remote or a Universal Remote to operate your TV

Sky Remote Control - If you wish to use your Sky remote to operate the basic functions of your TV, you need to
program a 4 digit code into it. Please note - you will need a Sky Revision 9 remote control (or later). If you wish to
upgrade/replace your existing Sky remote control to the latest version, you can do so on our website.

Universal Remote Control - If you wish to use a Universal remote control to operate your TV, please refer to the
website for a full list of codes. (Please note we only have codes for One for All branded remote controls, if you
have an alternative brand of Universal remote, please refer to the manufacturer for the code).

Connecting your TV to your Sky box (when both the TV and Sky Box are located in the same room)

Option 1)

Depending on your Sky Box & TV model, connect either by SCART or HDMI cables (available separately).

If connecting by SCART, select the ‘Input source’ on the TV as SCART. If your TV model does not have SCART,
please refer to the ‘Connections’ pages in this user guide for alternative ways to connect.

If connecting by HDMI, select the ‘Input source’ on the TV as HDMI (if the TV has more than 1 HDMI port, ensure
you select the input source to match the HDMI numbered port on the rear of the TV).

If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control (Revision 9 or
later) and you will need to program a 4 digit code into it.

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Product support44

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 44ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 44 04/12/2017 16:17:5204/12/2017 16:17:52

Product support

Help is always at hand

Connecting your TV to your Sky box (when your Sky box is located in a different room to the TV)

Option 2)

Please note, if you are adding a ‘Magic Eye/TV Link’ to your system so that you can use your Sky remote control to
change the Sky channel in the room where the 2nd TV is located, please refer to the instructions included with the
TV link/magic eye in order to ensure the RF or RF2 output on your Sky box is powered on. (The red LED light on
the TV link/magic eye will light up if the RF/RF2 output is correctly set up) If you do not have the instructions that
came with the TV link/magic eye, instructions on how to do it can be found on our website.

1) To tune the TV to the Sky box, on the 2nd TV, select the ‘Analogue’ input source.

2) Select the channel that you wish to store the Sky box/channel on. (If you do not use channels 1-5 because you

no longer have analogue terrestrial channels after digital switchover, you may choose to select channel 1 to store
the Sky box/channel, if you still have and use analogue channels 1-5, you may for example decide that channel 6 is
the best option for you)

3) Press the corresponding number on the remote control to select the desired analogue channel chosen as per

point 2 above.

4) On the TV remote control, press Menu. Now navigate through the menus to select Manual Tuning or Analogue

Manual Tuning (refer to the Tuning/Channel menu section of this user guide if necessary)

5) Manually tune in the channel (usually, the Sky box is at a frequency between 800Mhz and 850Mhz) once the Sky

box/channel is found, press ‘OK’ to store it. If you wish to use your Sky remote to operate the TV’s functions, you
will need a Sky remote control (Revision 9 or later) and you will need to program a 4 digit code into it.

If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control
(Revision 9 or later) and you will need to programme a 4 digit code into it.

2nd TV in
another room

Connect to the

SCART
or HDMI
cable

RF/COAX cable from
Sky Box to 2nd TV

Aerial/RF input
on the 2nd TV

Sky Box

Connect to RF
or RF2 output
on the Sky box

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

TV Link/Magic Eye
(optional)

Product support 45

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 45ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 45 04/12/2017 16:17:5204/12/2017 16:17:52

Product support

Help is always at hand

Frequently asked questions

General I would like to have

louder sound by
connecting additional
speakers.

General Why are some

options in the menu
unavailable and greyed
out.

General Can I stop my TV

automatically turning
o after 4hrs?

TV I have tuned in Digital

TV but I am not
receiving any or all of
the channels and/or
the channels I receive
are breaking up.

1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available
separately) to connect to an amplifi er/surround sound system. Please note
this will deactivate the TV’s built in speakers.

2) Connect a COAX cable from the TV’s COAX output to your amplifi er/
surround systems COAX input.

Some options are only available in certain sources, i.e. HDMI. They are
unavailable in the other sources where they have no a ect.

Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select OFF.

1) Check you are in an area that can receive Freeview/Saorview, visit www.
freeview.co.uk or www.saorview.ie

2) Check you are using an aerial that is able to receive a good digital signal.
In most cases, you will need an outdoor digital hi-gain/wideband aerial.
In areas that have excellent digital coverage, you may be able to use a loft
type aerial but it is highly likely that you will also need to connect a booster
between the back of the TV and the TV aerial wall socket. Unfortunately,
to receive a good enough digital signal, it is not possible to use a portable/
indoor type aerial.

TV I have re-tuned my

television but when
I switch it o it is not
storing the channels.

VCR/DVD
Recorder

Game
Consoles

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

I have connected the
TV to my VCR or DVD
Recorder via SCART but
it is not recording.

I have connected my
Playstation/Xbox to
the TV via HDMI, but I
am not receiving any
pictures or sound on
my Television.

If the TV does not save the channels when you power it o , it’s likely the
channel database has become corrupt.

1) Turn o the TV.

2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV
back on again.

3) Using the remote control, press Menu followed by 8-8-8-8 to enter the
initial setup/fi rst time installation menu.

4) Press OK (let the TV run the full tuning process).

5) Once completed, turn o the TV, reconnect the RF/Aerial cable then turn
the TV back on again.

6) Repeat steps 3 & 4.

In addition to connecting via SCART, you should connect the aerial cable
from the wall socket to your VCR/DVD Recorder and another aerial cable
from the VCR/DVD Recorder to the TV.

1) Ensure the TVs’ source is set to HDMI.

2) Check your settings on your Playstation/Xbox are as per the Playstation/
Xbox instruction manual.

Product support46

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 46ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 46 04/12/2017 16:17:5204/12/2017 16:17:52

Product support

Help is always at hand

Frequently asked questions

Game
Consoles

System Lock I have changed the

USB Mode I have inserted a USB

USB Mode Using a USB portable

DVD (For TV
models with
DVD only)

I have connected my
Playstation/Xbox to
the TV via Component
cables (red, green &
blue) but I am not
receiving any sound.

password on the
television and now
forgotten it.

Memory Key, but the
TV does not recognise
it.

hard drive / larger than
32GB.

I have inserted a disc
but it is not playing.

Component cables only provide HD pictures. For the sound you will need
to connect the red & white audio cables on the Playstation/Xbox to the red
& white phono inputs (or mini AV input where fi tted) on the rear of the TV.
Please refer to the ‘Connections’ pages.

There is a master password of 4711, to gain access to the TV menu and reset
the normal password.

Ensure the USB Memory Key is formatted to type FAT32.

If you wish to use a portable hard drive larger than 32GB, please note that
it must be formatted to the FAT32 fi le system in order to operate on this TV.
Windows XP/Vista computers are only capable of formatting up to 32GB,
therefore, you will need a software programme/utility to format larger hard
drives.
Please refer to the website, www.umc-uk.co.uk, for more information.

1) Ensure you have inserted the disc facing the correct way.

2) Ensure the disc is clean and is not scratched.

3) Some copied discs will not play.

4) Check the DVD is a region 2 disc – to change the region of the DVD
player, refer to www.umc-uk.co.uk, select ‘Changing DVD Region’ in the
‘Product Support’ section

DVD (For TV
models with
DVD only)

USB Record
(For TV
models with
USB record
only)

USB Record
(For TV
models with
USB record
only)

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

I have pressed the eject
button but the disc is
not coming out.

I cannot change the
channel, access the
menu or use the red
button.

When using the
USB to record the
picture ‘breaks up’ or
experience loss of
sound.

To eject the disc hold the stop/eject button for 4 seconds.

During time shift you cannot change the channel, access the menu or use
the red button.

Check the USB memory stick meets the minimum read speed requirements.
Standard defi nition channels require a read speed of 20 MB/s (Mega Byte per
second) and a
write Speed of 6 MB/s (Mega Byte per second) HD channels require the read
speed of 80 MB/s (Mega Byte per second) and a write speed of 40 MB/s
(Mega Byte per second). USB 3.0 sticks should be used where possible.

Product support 47

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 47ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 47 04/12/2017 16:17:5204/12/2017 16:17:52

Product support

Help is always at hand

Technical specifi cation

Product fiche

Trademark

Model ID

Energy effi ciency class A

Visible screen size (diagonal) 60 cm / 23.6 inches

On mode power consumption 25.0 W

Annual energy consumption *1 37 kWh

Standby power consumption *2 <0.50 W

Off mode power consumption 0 W

Screen resolution 1366 (H) x 768 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy
consumption will depend on how the television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.

Additional Technical Information

RF

Video Inputs 2 x HDMI, 1 x SCART, 1 x USB, 1 x Mini Composite/Video, 1 x Mini Component/YPbPr

Sound Inputs 1 x shared audio for Composite/Video & Component/YPbPr

Sound Outputs 1 x 3.5mm headphone jack, 1 x Digital Optical Audio output

Speaker / Amplifi er Watts (RMS) 2 x 5W / 2 x 3W

Dimensions including stand (mm)

Net weight

Energy Consumption Info

Voltage and power consumption

236/207O-GB-3B-EGDPS-UK
236/207O-GP-3P-EGDPS-UK

236/207O-GW-3W-EGDPS-UK

75 ohm Antenna / Analog / DVB

Alba

560W x 386H x 140D

4.3 kgs

220-240V 50Hz

25 / 50W

(ecomode/max)

EEI - A (Energy Rating)

Wall mounting VESA

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

100 x 100 (mm)

Product support48

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 48ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 48 04/12/2017 16:17:5204/12/2017 16:17:52

Product support

Help is always at hand

Technical specifi cation

Compatible files in USB Mode

Media File Ext.

.mpg

.avi

.ts

MOVIE

MUSIC

PHOTO

SUBTITLE

.mov
.mkv

.dat MPEG-1

.mp4

.vob MPEG-2

.mp3 -- MP3

.m4a/.aac -- AAC

.jpg/ Progressive JPEG Max Resolution: 1024×768
.jpeg Baseline JPEG Max Resolution: 15360×8640

.bmp BMP

.png

.srt SubRip

.ssa/.ass SubStation Alpha

.smi SAMI

.sub

.txt TMPlayer

Codec

Video

MPEG-1, MPEG-2

Xvid,

MJPEG

MPEG-4 SP/ASP,

H.263/H.264

MPEG-2,

HEVC

H.264,

MPEG-4 SP/ASP,

H.263/H.264,

HEVC

MPEG-4 SP/ASP,

H.263/H.264,

HEVC

MPEG-1, MPEG-2

Non-Interlaced Max Resolution: 9600

Interlaced Max Resolution: 1280×800

SubViewer

MicroDVD

DVDSubtitleSystem

SubIdx(VobSub)

Audio

MP3, AAC,
AC3, PCM,

Max Resolution: 1920x1080
Max Data Rate: 40 Mbps

Max Resolution: 1920×1080
Max Data Rate: 20 Mbps

Max Resolution: 720×576
Max Data Rate: 40 Mbps

Sample Rate: 8K~48KHz
Bit Rate: 32K~320Kbps

Sample Rate: 16K~48KHz
Bit Rate: 32K~442Kbps
Channel: Mono/Stereo

Max Resolution: 9600×6400
Pixel Depth: 1/4/8/16/24/32 bpp

SubViewer 1.0 & 2.0 Only

Remark

×6400

If you still require further assistance, call one of our experts on 0345 604 0105. (Calls are charged at the standard rate of your network provider).

Product support 49

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 49ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 49 04/12/2017 16:17:5204/12/2017 16:17:52

Product support

Help is always at hand

Your Alba Guarantee

This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to
faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the

purchase price refunded) where possible during this period by the dealer from who your purchased the unit.

The guarantee is subject to the following provisions:

• The guarantee does not cover accidental damage,
misuse, cabinet parts, knobs or consumable items.

• The product must be correctly installed and
operated in accordance with the instructions
contained in the manual.

• It must be used solely for domestic purposes. The
guarantee will be rendered invalid if the product is
re-sold or has been damaged by inexpert repair.

• Specifications are subject to change without notice.

• Alba disclaim any liability for loss or damage arising
from the breakdown of the product.

• This guarantee is in addition to and does not
diminish your statutory or legal rights.

Guarantor: Argos Limited - 489 - 499 Avebury Blvd. - Milton Keynes - MK9 2NW

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.

Product support50

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 50ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 50 04/12/2017 16:17:5204/12/2017 16:17:52

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 51ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 51 04/12/2017 16:17:5204/12/2017 16:17:52

Contact:

Helpline: 0345 604 0105

ALB/MAN/0006

ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 52ALB-MAN-0006 - Alba - User Guide - 24-207O models.indd 52 04/12/2017 16:17:5204/12/2017 16:17:52