Alarm Lock Trilogy User Manual

TAIL PIECE

P/N HW580

SPACER

P/N HW830

SCHLAGE CYLINDER ASSEMBLY ADDENDUM

FOR REGAL CURVED LEVER (75) TRILOGY MODELS ONLY

KNURLED NUT

CYLINDER

CYLINDER

(Not supplied with lock)

KNURLED NUT

(Not supplied with lock)

(Supplied with lock)

ASSEMBLY PROCEDURE:

1. REMOVE ORIGINAL TAIL PIECE: DEPRESS THE SPRING LOADED LOCKING PIN AND
UNSCREW THE KNURLED NUT.

2. PLACE SPACER (PROVIDED) ON CYLINDER, AS SHOWN.

3. PLACE TAIL PIECE IN VERTICAL POSITION (AS SHOWN).

4. ASSEMBLE THE KNURLED NUT: DEPRESS THE SPRING LOADED LOCKING PIN, THEN
SCREW BACK ON THE KNURLED NUT.

5. CHECK FOR PROPER CLEREANCE FOR ROTATION OF THE CYLINDER AND MAKE
SURE THAT THE SPRING LOADED PIN IS LOCKED WITH THE NUT.

TAIL PIECE

P/N HW580

SPACER

P/N HW830

(Supplied with lock)

SPRING LOADED LOCKING PIN

WI1037A 03/01