NEW FEATURE
"ONE TIME ACCESS FOR
GROUP 3 USERS"
OVERVIEW
Your T3e Series lock now includes a new feature named "One Time Access for
Group 3 Users", allowing the creation of multiple 'one time only' User Codes.
When this feature is activated, an entry by a Group 3 User will allow entry only
once, then the user will become disabled.
for the first time and access is granted, the Event Log will read "Entry" followed by
"User Disabled". If the User Code is entered a second time, access will be denied,
and the Event Log will read "User Denied Access".
TO ACTIVATE VIA THE KEYPAD
To use this new feature, proceed as follows:
1. Enable the Feature. Enter Program Mode and enter the key
sequence
; 6 7 ; 2 4 :
ADDENDUM
When the User Code is entered
Note:
.
2.
Assign the selected User Codes to Group 3
User Number 15 to Group 3, press:
; 3 5 ; 1 5 ; 3 :
. For example, to assign
TO ACTIVATE VIA DL-WINDOWS (V3.03 or later)
DL-Windows provides a check box on the Features screen (click the Feat button,
click the
Options
tab, and check "One Time Only For Group 3 Users").
Note:
If
this option is programmed via the keypad, downloading from versions of DLWindows prior to V3.03 will not alter the operation of this feature.
TO DEACTIVATE VIA THE KEYPAD
As with all
entering the following key sequence:
; 6 7 ; 0 0 0 :
© ALARM LOCK 2004 WI1266 2/04
; 6 7 ;
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
commands, this feature can be disabled by