Alan WRC User Manual

Download

Phone: (800) 435-

Fax: (877) 333-

ALAN ALAN

(2526) (2526)

Email: alansteel@alanmfg.com

www.

ALAN

mfg.com

Wireless Remote Control

For Direct Damper Control

Made in USA

Introduction

The WRC can control airflow from 1024 different wireless dampers installed on ceiling diffusers or registers. Each damper is programmed from the WRC with a Zone number from 1 to 32 and an Address from 1 to 32. Typically, a single WRC would control up to 32 different diffusers or dampers with the same Address. If more than 32 diffusers need to be controlled in a single building, work spaces or floors in that building could be assigned to differentAddresses and another WRC used for that floor or work space.

The actuator/damper can be digitally set to any airflow from 0% (fully closed) to 100% (fully open) using the WRC. The remote remembers the setting for each zone when the zone is selected.

User Manual

Model WRC

SET

Displays the percent

of maximum airflow.

SEL key is used to select the

Zone or Address number

or program the damper Zone

and Address.

ENT key is used to enter or

save the selected Airflow, Zone or

Address number and send

data to the damper.

SEL

ENT

Displays the selected zone or damper number.

ZONE

AIRFLOW

Up and Down keys for setting the Airflow level, Zone number or Address.