PROJECT NAME:
LOCATION:
ITEM NO:
TRAY ASSEMBLY SYSTEM
AIR CURTAIN PASS THROUGH REFRIGERATOR MODEL TAS PTAC
Air Curtain refrigerators are ideal for a variety of operations, including (but not limited to); meal tray assembly
lines, flight kitchens, buffet/cafeteria lines and fast food operations. The all stainless steel design offers easy
clean-up and long life, while maintaining an attractive appearance. Strategically designed air flow patterns
assure cold air is circulated across the cabinet front and rear to maintain proper serving temperatures under
the given guidelines of NSF.
STANDARD FEATURES:
• Stainless Steel Exterior & Interior
• Stainless Steel Pan Slides
• Stainless Steel 270˚ Hinges
• Positive Locking Door Latch w/Stay Open Catch
• Flush Recessed Side Pulls & Heavy Duty Transport
Handle
• Automatic Condensate Evaporator
• Exterior Mounted Thermometer
• (4) 1/2 Stainless Steel Doors
CABINET EXTERIOR: Unit exterior and interior to
be made from stainless steel with removable stainless
steel louvers. The refrigeration system is bottom mounted
providing greater stability, easier maneuverability and easy
access to pans/trays, which start at a convenient 23”
from the floor. The unit is provided with a full perimeter
bumper ledge, to provide safety to the unit as well as
other equipment or building walls. The unit is provided on
4” high (overall) poly (non-marring) casters, with front two
casters locking.
REFRIGERATION SYSTEM: The system
will utilize R-134A refrigerant and be provided with a
hot gas condensate evaporation system. The system
is readily accessed through front and side louvers.
Removable side louvers are also provided for greater
access to the systems components. The evaporator coil
is mounted separated from the product food zone and
houses the forced air circulating fans. The cooled air
is then pressurized through the air diffusers located at
the opening of the door mullions, forming a cross door
air flow pattern or “Air Curtain”. Proper temperature
is maintained while the door is closed with the use of
strategically placed internal air holes.
ELECTRICAL: The units will be provided with a 8’
cord and 3-wire grounded plug as standard, pre-wired
for 115 volt, 60 hertz, single phase operation.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
Air Curtain Pass Through Refrigerator.
Model TAS PTAC shown.
CABINET BASE INTERIOR: All Stainless Steel
interior with removable stainless steel air diffuser and
pan slide assembly. The base shall be foamed in place
polyurethane insulation with a minimum thickness of 2”.
STORAGE CAPACITY: Pan Slide assembly
provided has (14) sets of angle slides to accept (14)
18x26” sheet pans.
DOORS: Stainless steel front with easy to grasp positive
latching door handle, which provides secured door closer
during moves. Interior of door is also stainless steel for
easy clean-up and longer life. Doors mounted on heavy
duty 1/8 stainless steel plate hinges with 270˚ stay open
latch catch. The door is removable without tools. A snap-in
heavy duty magnetic gasket is provided. Door is foamed in
place polyurethane insulation.
OPTIONS/ACCESSORIES:
6” Casters
Legs in Lieu of Casters
TAS SYSTEM
PP SPECTASPTAC RevB
Revised 01/16
TAS PTAC
Model No.
Length
Depth
Height*
Doors
Cu. Ft.
HP
Volt
Amps
NEMA
Ship Wt.
TAS PTAC
27’
34.375’
83.646”
(4) 1/2 doors
18
1/2
115/60/1
12
5-15P
485
888-994-7636, unifiedbrands.net
© 2016 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...