Conduvection Cart Controller/Chiller
Model Numbers
Model 24017-1
Description
The A la Cart Controller/Chiller is the companion unit to the
Conduvection Cart. It is typically located in the pantry on the patient
floor of a hospital, and in a central kitchen or any other location
dedicated for storage and holding of loaded carts before delivery to
the patient floor.
Controller/Chiller units easily accommodate centralized or
decentralized holding and rethermalization plans.
The Controller/Chiller provides a chilling function to the trays during
the initial loading and holding phase and then maintains chilling for
dishes that are served cold, during rethrermalization of dishes that
are served hot. The processor in the Controller/Chiller unit combines
low-intensity conduction heating with gentle, lower-temperature
(145-160ºF) convection heat on the “hot side” of the cart.
Specifications
CABINET EXTERIOR: Heavy Gauge aluminum with a textured powdercoat. Front Fascia is formed from a high impact, flame retardant
plastic (UL approved).
REFRIGERATION SYSTEM: 208 Vac, single- phase (internally fused)
compressor with R404A refrigerant.
ELECTRICAL REQUIREMENTS: 208 Vac, 30 Amps, 3 phase WYE, 60
Hz, 5-wire grounded,
Plug configuration: NEMA L-2130-P
TEMPERATURE STATEMENT: The chiller thermostatically maintains a
Conduvection cart at 38 degrees.
MOBILITY: The Chiller/Controller unit can be easily moved using a
two wheel hand truck. This facilitates installation and allows for easy
chiller relocation during renovation or hospital growth.
model 24017-1
MANAGEMENT: An A la Cart Central Management Control System (CMCS)
can be added to any System II operation. It can program, monitor and control
all units – on every floor, in remote buildings – right from a computer in an
office or central kitchen.
On-screen indicators provide real time information regarding the status of
every Controller/Chiller unit, so you can track cart arrival and meal delivery
times, as well as faults. CMCS generates temperature logs that document
food safety compliance and produces management reports for HACCP
control.
Dimensions (WxLxH)
• 30” x 29” x 62.9 ”
• Weight: 405 lbs
CONTROL: programmable electronic controller; self diagnostics for
Chiller and Conduvection cart; unsafe temperature display for HACCP
monitoring.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
A la Cart, Page 9
CCCC 157352 Rev. B
Revised 12/14
Model 24017-1
888-994-7636, unifiedbrands.net
© 2015 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.