TABLE OF CONTENTS
SAFETY PRECAUTIONS
IMPORTANT SAFETY INSTRUCTIONS
NOTICE
ACCESSORIES and FRONT PANEL
CONTROL and BASIC CONNECTION
BASIC CONNECTION
REMOTE CONTROL
BASIC PLAYBACK
ADVANCED PLAYBACK
SPECIAL FUNCTION PLAYBACK
SYSTEM SETUP
TROUBLE SHOOTING
SPECIFICATIONS
01
03
04
05
06
07
08
09
10
11
12
15
16
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equila-
teral triangle, is intended to alert the user to the presence
of uninsulated "dangerous voltage " within the product's en-
closure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The symbol for CLASS II (Double Insulation).
WARNING:
CAUTION:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE, DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET, REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.
When replace the direct plug in power supply or a separable, cord-connected power
supply, the replacement must be exact duplicate, or one recommended by the manu-
facturer.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
This product utilizes a laser.
Use of controls or adjustments or performance of procedures other than those
specified here in may result in hazardous radiation exposure.
Do not open the cover and do not repair yourself. Refer servicing to
qualified personnel.
DANGER: Visible and invisible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
01
SAFETY PRECAUTIONS
This product incorporates copyright protection technology that is protected by
method claims of certain U. S. Patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Consumers should note that not all high definition television sets are fully compatible
with this product and may cause artifacts to be displayed in the picture.
In case of 525 or 625 progressive scan picture problems, it is recommended that he
used switch the connection to the "standard definition" output. If there are questions
regarding our TV set compatibility with this model 525p and 625p DVD player, please
contact our customer service centre.
Manufactured under license from Dolby Laboratories. " Dolby " and the double-D
symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
The Wastebin
02
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS MANUAL AND
THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation,
use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
03
04
ACCESSORIES
Audio/Video cable .................... 1
Remote control ......................... 1
Owner's manual ........................ 1
Batteries..................................... 2
FRONT PANEL
ACCESSORIES and FRONT PANEL
V.MODE
3
1 2
OSD
5
6
4
SUBTITLE
7 8 9
SEARCH
TITLE
0 10+
REPEAT A-B RPT
CLEAR
PAL/NTSC
MENU
OWNER'S
MANUAL
Owner's manual
SETUP
ZOOM
PROG
F.FWDF.REV NEXTPREV
STOPSTEPPAUSE
AUDIO
MUTE
VOLUME
ANGLE
1. TRAY
2. POWER INDICATOR
3. REMOTE CONTROL SENSOR
4. STANDBY/ON
POWER
5. OPEN/CLOSE
6. PLAY/PAUSE
7. STOP
8. L/R AUDIO OUTPUT SWITCHING
05
REAR PANEL OUTPUT
CLASS 1 LASER PRODUCT
AC 230V-240V~ 50Hz
POWER SUPPLY :
AC 230V-240V~ 50Hz
POWER CONSUMPTION :
15 WATTS
DVD62
2006/06
SCART OUTPUT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1
1. POWER LINE INPUT
2. SCART OUTPUT
3. 2 CHANNELS OUTPUT
4. COAXIAL OUTPUT
BASIC CONNECTION
Connecting to a TV with Scart cable
CONTROL and BASIC CONNECTION
S/N:
A003249XXXXXX
Apparatus
Claims of U.S.
Patent Nos. 4,
631,603;4,577,
L
R
2-CH AUDIO OUT
Y CB / PB
COAXIAL
VIDEO
DIGITAL AUDIO OUT / VIDEO OUT
216;4,819,098
and 4,907,093
licensed for
limited
viewing uses
only.
4
5. VIDEO OUTPUT
6. Y, CB/PB, CR/PR OUTPUT
7. S-VIDEO OUTPUT
DVD62
Manufactured under
license from Dolby
Laboratories. "Dolby"
and the double-D
CR / PR
symbol are trademarks
of Dolby Laboratories.
Confidential
Unpublished works.
Copyright 1992-1997
Dolby Laboratories.
S-VIDEO
All rights reserved.
5
7
632
SCART OUTPUT
To Scart output
To Scart input
Connecting to a TV with Audio/Video cable
L
COAXIAL
R
2-CH AUDIO OUT DIGITAL AUDIO OUT / VIDEO OUT
To video input(yellow)
To audio inputs(red, white)
To S-video output
If the TV has an S-video input, connect the DVD player with an S-video cable.
When using an S-video cable, do not connect the yellow video cable.
06
L
R
2-CH AUDIO OUT DIGITAL AUDIO OUT / VIDEO OUT
Y CB / PB
VIDEO
Y CB / PB
COAXIAL
CR / PR
S-VIDEO
To S-video input
CR / PR
S-VIDEO
VIDEO
BASIC CONNECTION
Connecting to a audio system and TV equipped with YUV video input
Y CB / PB
COAXIAL
CR / PR
S-VIDEO
VIDEO
To CR/PR video output
To Y video output
To CB/PB video output
To CR/PR video input
To CB/PB video input
To Y video input
To audio inputs of the amplifier
L
R
2-CH AUDIO OUT DIGITAL AUDIO OUT / VIDEO OUT
Connecting to an amplifier equipped with a digital audio input and TV
Y CB / PB
COAXIAL
CR / PR
S-VIDEO
VIDEO
To Y video output
To CB/PB video output
To CR/PR video output
To CR/PR video input
To CB/PB video input
To Y video input
To COAXIAL
type digital
audio input
Coaxial cable
L
R
2-CH AUDIO OUT DIGITAL AUDIO OUT / VIDEO OUT
07
REMOTE CONTROL
5
8 9
0 10+
CLEAR
STOPSTEPPAUSE
18
3
6
19
PAL/NTSC
20
21
MENU
22
23
PROG
24
25
26
AUDIO
27
28
VOLUME
29
1
V.MODE
1 2
2
OSD
4
3
SUBTITLE
7
4
SEARCH
TITLE
5
6
REPEAT A-B RPT
7
8
SETUP
9
10
ZOOM
11
F.FWDF.REV NEXTPREV
12
13
14
15
MUTE
ANGLE
16
17
1. OPEN/CLOSE DISC TRAY
2. V.MODE
3. OSD (On Screen Display)
4. SUBTITLE
5. TITLE
6. SEARCH
7. REPEAT
8. A-B REPEAT
9. SETUP
10. ENTER/PLAY
11. ZOOM
12. FAST REVERSE
13. FAST FORWARD
14. PAUSE
15. STEP
REMOTE CONTROL
Function Function
16. MUTE
17. ANGLE
18. STANBY
19. DIGITS AND 10+ BUTTONS
20. PAL/NTSC
21. CLEAR
22. MENU
23. CURSOR
24. PROGRAM
25. NEXT
26. PREVIOUS
27. AUDIO
28. STOP
29. VOLUME +/- (Volume control)
UP
LEFT RIGHT
DOWN
Stop playback
1. Press STOP button to go to stop mode, the TV
screen will show the start logo. As some disc the
player can recall the location where stopped, such
as DVD.
2. Press ENTER/PLAY to playback to resume play-
-back from the location where playback is stopped
or from the beginning of the disc.
3. Press STOP twice to stop completely.
Previous and Next
During playing, press PREV key can back to
start of this chapter, then each press this key will skip
a chapter still the start of the disc.
Each press of NEXT during playing will skip
key
the current chapter and play the next one.
08
BASIC PLAYBACK
Preparations
When you want to view a disc, turn on the TV and
select the video input connected to the DVD player.
Basic playback
1. Press POWER in the front panel, the DVD player
turns on and the TV screen will display the start
logo. If a disc is already in the tray, it will begin
to play once the power is on.
2. Press OPEN/CLOSE to open the disc tray,
place a disc on the disc tray.
There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.
3. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
Some discs may not playback automatically,
you can press ENTER/PLAY button to start
playback.
4. Some discs may start playback with a menu,
use the cursor button on the remote control to
select menu options and press ENTER/PLAY
to start, or press digits to select a menu options
directly.
IMPORTANT NOTE:
THE FOLLOWING FUNCTIONS ARE APPLICABLE ONLY TO DVD DISCS. IF OTHER DISC FORMATS ARE
PLAYED, SCREEN DISPLAY AND OPERATION WILL BE DIFFERENT.
Fast forward and Fast reverse
1. Press F.FWD to fast forward through the disc.
Each time the F.FWD button is pressed, the
fast forward motion speed changes.
2. Press ENTER/PLAY to resume normal playback.
3. Press F.REV to fast reverse through the disc.
Each time the F.REV button is pressed, the
fast reverse motion speed changes.
4. Press ENTER/PLAY to resume normal playback.
Pause playback
1. Press PAUSE to pause playback (still mode).
The sound will be muted during still mode.
2. Press ENTER/PLAY or PAUSE to resume normal
playback.
Single step playback
1. Press STEP continuous to single step forward
to the next frame in the video.
2. Press ENTER/PLAY to resume normal playback.
NOTES:
1.
V.MODE
This button can set VIDEO output among "CVBS",
"YUV", "P-Scan" or "RGB" .
Note: The screen disappear when press this button,
press this button continuously until the screen turn
normal. If there are picture interferences or no picture,
please press "V.MODE" to correct it.
SUBTITLE
Press this button and the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
OSD
Press this button and the screen will display some information about disc, such as : " Title Elapsed " , " Title
Remain ", " Chapter Elapsed ", " Chapter Remain " and " Display Off ".
09
ADVANCED PLAYBACK
TITLE
According to some DVD discs, press this button will
display "Title Menu", the unit will play from the disc
head or you can use digits to select tracks preferred.
SEARCH
Press this button and the screen display menu, then
press digits button into menu, for example:
first Title 02/10 Chapter /32
twice Title 02/10 Time : :
third Chapter 01/32 Time : :
According to operation, you could choose point that
you want to play.
REPEAT
Follow this operation :
first Chapter
twice Title
third All
the fourth pressed will cancel repeat.
A-B REPEAT
Press " A-B RPT " to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
MENU
Press this button and the screen will display " Root
Menu ", select item according to your preference.
(This key is valid to DVD disc possessing multi-layer
menu.)
ZOOM
Each time pressed, the picture enlarges.
In this mode, you can move the picture with CURSOR
button.
PROGRAM
Press this button and the screen will display info
window , press digits button to input the program
number what you want, when finished, move the
cursor to select the " Start " logo, at this time the unit
will start program playback and the screen will display
"Program" logo.
If you want to cancel this function, press " STOP "
and then press "ENTER/PLAY" .
AUDIO CHANNEL CHOOSE
Press this button on remote control to change the
mode of audio.
For example: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Note: When press this button continuously, you must
above 3 seconds interval.
CLEAR
This button can cancel the mistake information you
input.
PAL/NTSC
Press this button will switch among NTSC, PAL and
MULTI(AUTO).
ANGLE
For discs with this feature, press this key to view
action from different angles.(Depending on the DVD)
VOLUME and MUTE
Press " + " at the right of VOLUME to increase
volume, " - " to decrease to volume. The first press
of MUTE will display MUTE (no voice), the second
press will return to normal playback.
10
AUDIO CD PLAYBACK
SPECIAL FUNCTION PLAYBACK
When playing Audio CD disc, a navigation menu will be displayed
automatically if the disc is loaded in succession.
In the menu, use UP or DOWN button in the cursors to select the
file, then press "ENTER/PLAY" to play this file. In this page, press
PREV or NEXT can go to the previous or next page.
00:00 00:00
001/010
A/V
TRACK01
A/V
TRACK02
A/V
TRACK03
A/V
TRACK04
A/V
TRACK05
A/V
TRACK06
MP3 PLAYBACK
00:00 00:00
001/010
MP3_01
MP3_02
MP3_03
MP3_04
MP3_05
MP3_06
KODAK PICTURE CD DISC PLAYBACK
When playing Kodak Picture CD disc, a navigation menu will be displayed automatically if the disc is loaded
in succession. In the menu, use UP or DOWN in the cursor to choose folder, then press "ENTER/PLAY" button
to confirm. in the folder, use UP or DOWN in the cursor to select a file, then press "ENTER/PLAY" to play.
Each picture in the Kodak Picture CD will be displayed consecutively in a slide-show fashion and will be scaled
to fit in the whole TV screen. If you want to return the menu, press MENU button.
If you desire to display an image indefinitely, press the PAUSE button. To view the next or previous picture,
press NEXT or PREVIOUS button. To resume the slide-show, press the "ENTER/PLAY" button.
IMPORTANT NOTE: Quality of pictures displayed on the screen is highly dependent on the viewing device.
JPEG DISC PLAYBACK
When playing JPEG disc, a navigation menu will be displayed automatically if the disc is loaded in succession.
In the menu, use UP or DOWN in the cursor to select a file, then press "ENTER/PLAY", the file will be play with
a slide - show. Press PREV or NEXT to select the previous or the next picture. Press PAUSE to pause the
current picture for enjoying, when press "ENTER/PLAY" , it will return to normal playing.
11
SYSTEM SETUP
When you press SETUP key on the remote control,
the setup menu will be displayed.
1.Within the setup menu, you can use UP, DOWN,
LEFT and RIGHT buttons on the remote control
to move the cursor, and then press the
ENTER/PLAY button to make your selection.
Press LEFT can return the previous menu.
2.To exit setup menu, you can press SETUP
menu.
1. GENERAL SETUP PAGE
Setup TV screen format, video type and all DVD
functions.
Dolby
Audio
General
General Setup Page
Tv Display
Angle Mark
Osd Lang
Caption
Screen Saver
Go To General Setup Page
LB
On
ENG
On
On
1.1 TV DISPLAY
The TV Display which select the different ratio of
display format and the screen of TV, There are
various types of display on screen for different
matches between Disc and TV .
Note:
No matter which display format is selected, a
picture recorded in standard 4:3 format always
displays in the 4:3 aspect ratio.
The display format of DVD titles may vary; please
refer to the information that accompanies your
specific DVD title.
If the DVD title is recorded in 16:9 wide display
format while the TV is a standard 4:3 screen,
horizontal compression of the image will result.
Some DVD titles may be recorded in special
formats. In such cases, the DVD titles will always
appear on the screen in their original format,
regardless of which TV display format you select.
Video
Preference
1.2 ANGLE MARK
ANGLE MARK: Users can select a particular camera
angle when playing a DVD that offers multiple angles.
1.3 OSD LANGUAGE
On Screen Display (OSD) Language: Users can
select the whole setup menu and on-screen display
language.
1.4 CAPTION
CAPTION: For hearing-impaired people. the program
can be displayed with recorded explanatory captions.
Note: This is valid for a disc that has captions.
1.5 SCREEN SAVER
SCREEN SAVER: If the screen saver is on,then there
will be an animated picture on the screen whenever
the DVD player is idle for a certain time.
2. AUDIO SETUP PAGE
2.1 SPEAKER SETUP PAGE
Dolby
Audio
General
Speaker Setup Page
Downmix
Spdif Output
Hdcd
Set Downmix Mode
44.1K
Video
Lt/Rt
Stereo
Preference
12
SYSTEM SETUP
2.1.1 DOWNMlX SETUP
DOWNMIX MODE: Sets front speakers to LT/RT
STEREO.
The first 2 settings (LT/RT, STEREO) downmix
the sound Signal for 2-Speakers. This setting
allows you to enjoy a surround sound effect with
onIy two speakers. For this reason a setup for
additional speakers (described in the following
sections) is disabled when DOWNMlX MODE is
set to these settings.
2.2 SPDIF SETUP PAGE
2.2.1 Spdif Output
SPDlF OUTPUT MODE: Sets the audio outputs.
Under the status of SPDIF/RAM , can not adjust
volume of DVD, CD , it can only adjust under the
MP3 format.
SPDIF the abb reviation of Sony Philips Digital
Interface Format .
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is
output through the back-paneI connections for L, R.
2. SPDlF/RAW or SPDIF/PCM: This surround sound
format is output to a Dolby Digital decoder through
the optical and coaxial connectors on the back -
panel of the product.
2.3 HDCD
Please choose the sampling frequencies of the digital
filter, the higher the sampling frequencies are, the
clearer the audio quality is. When default setting is
off, it will display "CD" by reading HDCD, for HDCD
playback, please choose 44.1K or 88.2K.
3. DOLBY DIGITAL SETUP PAGE
Dolby
Audio
General
Dolby Digital Setup
Dual Mono
Dynamic
Go To Dolby Digital Setup
Video
Preference
3.1 DUAL MONO
DUAL MONO: If your amplifier / decoder has
Dolby Digital output, you may select stereo, left
mono, right mono, or mixed mono mode for your
amplifier decoder.
3.2 DYNAMIC
DYNAMIC: This function is generally used when
playing high volume programs at night, in order
to minimize disturbances . This setting can dynamically lower the volume and still keep the original
tone quality. This is the range, measured in decibels(dB), between the loudest and the quietest
sound registers in a soundtrack.
4. VIDEO SETUP PAGE
Dolby
Audio
General
Video Setup Page
Component
Tv Mode
Sharpness
Go To Video Setup Page
RGB
Middle
Video
Preference
4.1 COMPONENT
COMPONENT: Sets the video output.
13
4.2 TV MODE SETUP PAGE
TV MODE: Sets the scan mode to same of your TV.
If there are picture interferences or no picture, please
press "V.MODE" to correct it.
( T
he component option must select YUV , the
TV MODE option is valid.
)
4.3 SHARPNESS
SHARPNESS: Sets the sharpness level of video
output.
5. PREFERENCE SETUP PAGE
The preference setting is only active with no disc,
and the setting is effective on each time power on
till exchanging the saved setting.
5.1 TV TYPE
TV TYPE: This player supports different TV output,
including Auto, NTSC, and PAL systems.
lf your TV support only NTSC or PAL and you have
inadvertently selected the wrong TV type, the TV
image will flicker and become black-and-white.
In this case, you should press the SETUP button
to set as following Note.
Dolby
Audio
General
Preference Page
Tv Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Set Tv Standard
PAL
ENG
Off
ENG
Note: How to Set the TV Type?
You may switch the NTSC/PAL setting of the DVD
player to match the video signal of your TV.
The table below shows what kinds of disc are com patible with each setting (AUTO, PAL and NTSC)
Video
PAL
AUTO
NTSC
Preference
SYSTEM SETUP
5.2 AUDIO
AUDIO: Sets the preferred audio language as the
default when playing DVD. (If the DVD supports the
languages)
5.3 SUBTITLE
SUBTITLE: Sets the preferred subtitle language as
the default when playing DVD.( If the DVD supports
the languages)
5.4 DISC MENU
DISC MENU: Sets the preferred menu language as
the default when playing DVD. (If the DVD supporst
the languages)
5.5 PARENTAL
PARENTAL: The parental control function works in
conjunction with the different censorship classes
assigned to DVDs. These classes help to control the
types of DVDs that the family watches, There are up
to 8 censorship classes for DVDs.
Note: If you change this set, you must input password.
(Initial password : 136900)
5.6 PASSWORD MODE
PASSWORD CHANGE: You can change the pass-
word, please type 6 numerals as new password.
Note: (Initial password : 136900)
Be sure remember new password. When set parental
control function you must input new password .
5.7 DEFAULT
DEFAULT: Resets to all the manufacturer's original
settings for this DVD player Press ENTER to perform
the reset.
14
TROUBLE SHOOTING
Please check the following guide for the possible cause and solution for a problem before contacting the
nearest service center or dealer for repairs.
SYMPTOMS AND CORRECTIONS
SYMPTOMS CORRECTIONS
No power
No picture
No sound
Check to make sure that the power connection is secure.
Make sure the connection between the player and the TV is secure.
Make sure that the TV is in good working condition.
Please press "V.MODE" button continuously until the picture returns
to normal.
Make sure the connection between the player and other devices
are secure.
Make sure that the TV and AMP are in good working condition
and setup properly.
Failed to Play
Failed to respond to
remote control
Picture Disturbance
Failed to work
with keys
Check that the disc is properly inserted.
Clean the disc.
Remove obstacles between remote control and unit.
Aim remote control at the sensor on the front panel.
Check batteries and replace them if necessary.
Check the disc for dirt and scratches. Clean or replace disc.
Shut down the unit, wait ten seconds, and restart the unit.
Power surges or brown outs or other electrical phenomena.
Shut down the unit, wait ten seconds, and restart the unit.
15
System and Outputs
SPECIFICATIONS
VF Signal
system
Frequence
response
Audio S/N ratio
Video/Picture
Audio
Audio output
(analog audio)
Audio output
(digital audio)
Video output
S-Video output
Component video
(Y, CB,CR)
General
Power
Power
consumption
Product
Dimensions
NTSC/PAL
CD: 20Hz-20KHz(EIAJ)
DVD:
20Hz-44KHz(96KHz)(Sample result)
20Hz-22KHz(48KHz)(Sample result)
> 90 dB
MPEG1 V2.0; MPEG2
MPEG LAYER2 standard
Electric level output: 1.8 0.2V Resistance: 10KS
Electric level output: 0.5Vp--p esistance: 75SR
Electric level output: (1.0 0.2)Vp--p esistance: 75S Unbalanced negativeR
Electric level output: Brightness(Y)1.0Vp--p,
Chrominance (C): 0.286Vp--p, esistance: 75S
Electric level output: 0.7Vp--p, resistance: 75S
230V-240V~ 50Hz
< 15W
L: 225mm W: 235mm H: 48mm
+
Resistance: 75S
R
Weight
Operating
temperature
Operating
humidity
Note: We reserve the right to modify the design without advice!
1.4kg
oooo
5 C to 35C (41F to 95F)
5% to 90%
16
Loading...