AKSys S1DONGLE, S1 User Manual

Gamepad S1

User Manual

https://www.aksys.co.kr

BEFORE USE

Check out this manual before using Gamepad S1.
Charge Gamepad S1 fully before using it for the
first time.

CONTENTS

Gamepad S1 USB Dongle

Charging Cable

(PC connectivity)

SHAKS

Bracket

User Manual

CONTROLLER BUTTONS

Select

L-Stick(3D)

D-Pad

RB

RT

X

USB Micro B

Start

Y

A

Y

X B Button

B

A

R-Stick(3D)

LB

LT

TECHNICAL SPECIFICATIONS

Product : Gamepad S1

Connectivity : 2.4GHz Wireless Gamepad

& USB Dongle

Frequency Band : 2400 ~ 2483MHz

Output Power : Class 2

Transmission Range : 7~10 M

Supported Profiles : HID

Operating Time : Max 8h

Charging Time : 1h

Size : 153 mm (W) x 110 mm (L) x 58 mm (H)

Weight : 200 g

CONNECTIBLE DEVICE

Android Smartphone

Android TV Set-top Box

Windows PC

Usage of Android Smartphone

1

Connect a correct USB-OTG gender & USB
dongle to Gamepad S1.

Micro USB OTG

2

Plug connected OTG device into phone.

3

Press on the Gamepad S1 for 1 second.

4

Press and hold for about 5 seconds

USB C OTG

when all 4 LEDs flash slowly.

5

Press USB dongle button when all 4 LEDs
flash quickly.

6

You can use Gamepad S1 when 1st LED lights
up.

7

You can play up to 2 Gamepad S1 controllers.
When they connect,1st or 2nd LED will
light up.

Usage of Android TV Set-top box

1

Connect USB dongle to USB-port on TV.

2

Press on the Gamepad S1 for 1 second.

3

Press and hold for about 5 seconds when
all 4 LEDs flash slowly.

4

Press USB dongle button when all 4 LEDs
flash quickly.

5

You can use Gamepad S1 when 1st LED lights
up.

6

You can play up to 2 Gamepad S1 controllers.
When they connect,1st or 2nd LED will
light up.

Usage of Windows PC

1

Connect USB dongle to PC.

2

Press on the Gamepad S1 for 1 second.

3

Press and hold for about 5 seconds when
all 4 LEDs flash slowly.

4

Press USB dongle button when all 4 LEDs
flash quickly.

5

Press [LB] and [Select] button for 3 seconds
when 1st LED lights up.

6

Gamepad S1 is ready to use when 1st and 2nd
LED light up with message display of “XBOX
360 For Windows” on PC.

TURN OFF/RECONNECT

To save energy, Gamepad S1 switches off auto
matically after 5 minutes of inactivity. Press
to reactivate it.

When reconnecting the USB dongle, Gamepad
S1 switches to the ‘Android Mode’.

If you want to use Gamepad S1 on Windows
PC, please follow the steps previously descri
bed for “Usage of Windows PC”.

BATTERY CHARGE

If the 1st or 2nd LED flashes continuously
while in use, Gamepad S1 needs to get recha
rged.

Since Gamepad S1 requires 5V charging voltage,
it is recommended to connect USB Micro
B port between [LB] & [RB] button to KC­certified Power Adapter or PC using the
supplied charging cable.

5W

FCC Statement

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two cond
itions:

1）This device may not cause harmful interference
2）This device must accept any interference re
ceived, including interference that may cau
se undesired Operation.

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.

This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the

interference by one or more of the following
Measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.

Caution : Any changes or modifications not
expressly approved by the party responsible
for compliance could void the user's authority
to operate the equipment.

Product Warranty

Model Name : Gamepad S1

Product warranty Period:1 year from
the date of purchase

Purchase Date :

Phone No of A/S : [phone]

Address of A/S:
A-706, 53, Seonggogae-ro, Uiwang-si,
Gyeonggi-do, Republic of Korea

※ When repair service is needed, this w
arranty card, which shows the date o
f purchase, must be provided.

1. The free warranty for this product is
covered as described in this product
warranty.

2. Since the warranty period is calculat
ed from the date of purchase, the pu
rchase date must be stated.
: The warranty period is calculated ba
sed on the purchase receipt or purch
ase statement. If there is no proof of
purchase, the standard for resolving
the consumer dispute can be applied
based on the production date.

3. Quality assurance product range is lim
ited to basic components such as Gam
epad S1gamepad and USB dongle. Any
damage that occurs under normal use
within the warranty period is free of c
harge, and repair costs must be paid b
y the customer in the event of failure

or damage caused by user's negligenc

e, even if the warranty period has expi
red or is within the warranty period.

4. If you use this home product as a bu
siness purpose or means, or use it in
an unusual environment, the warran
ty period will be shortened to 50%.

5. This warranty cannot be reissued.

6. In the case of supply under a separat
e agreement, the warranty shall be a
pplied in accordance with the main
contract.

E. [e-mail]
T. [phone]
F. [phone]

에이케이시스 (주)

https://www.aksys.co.kr

Gamepad S1

1 2

Gamepad S1

Gamepad S1

3 4

Gamepad S1 Gamepad S1

5 6

Gamepad S1