This material is copyrighted by AKSys Co. Ltd. Any unauthorized reproductions, use or disclosure of this
material, or any part thereof, is strictly prohibited and is a violation of Copyright Laws.
AKSys reserves the right to make changes in specifications at any time without notice.
The information furnished by AKSys in this material is believed to be accurate and reliable, but is not warranted
to be true in all cases.
RÖTH & MYERS and BOSK are trademarks of AKSys Co., Ltd.
Revision History
Issue Date Description of Changes
1.0 May 11, 2018 Initial release for mass production
ii BOSK User Guide - ENG- Issue 1.0
Table of Contents
TABLE OF CONTENTS ......................................................................................................... I
BEFORE USE ....................................................................................................................... 1
A
BOUT THIS GUIDE ...................................................................................................................................... 1
Introduction of the Document .......................................................................................................... 1
Explanation of Symbol or Word ...................................................................................................... 1
MPORTANT SAFETY INFORMATION ................................................................................................... 22
ISPOSAL OF YOUR OLD APPLIANCE .................................................................................................. 23
ii BOSK User Guide - ENG- Issue 1.0
Before Use
About this Guide
This guide is intended for users of RÖTH & MYERS BOSK speaker. The guide provides user-related
information.
Introduction of the Document
This guide explains how to install and correctly use RÖTH & MYERS BOSK speaker. Product figures and
screen images used in this guide may be changed without notice for quality improvement.
Explanation of Symbol or Word
The following are symbols used in this guide. Information presented with these symbols must be observed for
the correct use of your speaker.
Caution!
This mark warns of a situation in which light injury or product damage may occur if the instructions are not
followed.
NOTE
A note provides additional explanation, emphasis on important information or reference for related information,
which is required for the correct use of the speaker.
Product Release
Carefully unpack the product and ensure that the following parts are present:
BOSK User Guide - ENG- Issue 1.01
Chapter 1. Introduction
1.1 Front Design
Item Description
Status LED: Display the status & connection mode of speaker
❶
WiFi (White) ֲ microSD (Red) ֲ BT (Blue)
ֲ S/PDIF (Light Green) ֲ AUX (Green) ֲ LAN (White)
Before using BOSK Speaker, please download an application program for BOSK Speaker ‘R&M Player’ in ‘Google
Play’ or ‘Apple App Store’. After installing to your mobile device, you can connect to your BOSK Speaker.
To use WiFi, make sure your mobile device is connected to the same WiFi network that BOSK Speaker uses. With
provided password for network, the WiFi connection and use will be much quicker and easier by following the onscreen instructions in R&M App.
After the initial connecting, the BOSK Speaker will remember the WiFi network and whenever it enters WiFi mode, it
will automatically attempt to connect to your device. If your speaker is disconnected or unable to connect normally,
please repeat the steps below or try the content of troubleshooting in the appendix.
NOTE
If you are currently using a dual-band (2.4GHz/5GHz) WiFi router, be sure to connect your mobile device with your
BOSK Speaker using the 2.4GHz band.
When the power switch on the back panel is turned on, the front status LED will flash white and the speaker will
enter to WiFi standby mode (basic mode).
Start R&M App on your mobile device and press ‘Add Device’ button.
From ‘SETUP’ screen of R&M App, press ‘Settings’ at the bottom. Select the Speaker starting with BOSK_XXXX
from the ‘WiFi’ menu of mobile device. After connecting mobile device directly with the BOSK Speaker, get out
from ‘WiFi’ menu in mobile device.
On the ‘SELECT NETWORK’ screen of R&M App, select 2.4GHz network to which you want to connect the
BOSK Speaker. Enter the password and then press the ‘Continue’ button on the bottom. Now, BOSK Speaker
will attempt to connect to 2.4GHz network by using the password you entered.
The ‘CONNECTING’ screen in R&M App will display the progress of connection between the Speaker and WiFi
network. Once successfully connected, the ‘CONNECTED’ screen will be displayed and voice prompt will be
heard.
Pressing the ‘Next’ button at the bottom of the screen, the ‘Name Device’ menu allows you to select a speaker
name from the list, or you can create the speaker name by using ‘Customize’. You can also leave original name
‘BOSK_XXXX’ by pressing the next arrow (>) at the top of the screen.
4 BOSK User Guide - ENG- Issue 1.0
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.