Akron PE 3419 User Manual

Apollo PE 3419
Order Form

Select Package:

Select One

Standard Package (Stop here. Order form complete)

• Single inlet Ground Base

• 3505 Storage Bracket • Truck Power Harness

• Wireless Hand Held

• CAN 4 Toggle Switch Box
(Right/Left, Up/Down, Fog/Stream, Oscillation)

Custom Package (Continue on following pages to complete order form)

• Custom configurations may have longer lead times. Please contact customer
care for pricing and availability.

Select Ground Base/Flange:

Select Any

Dual Inlet Ground Base (2-2.5 NH unless otherwise specified)

Single Inlet Ground Base (Specify connection type & size)

No Base

Truck Mount Flange

Select Outlet:

Select One

NH

Other, Specify_______________________________________

• Truck Mount Flange

• 5177 Akromatic 1250 Nozzle

Dual Inlet

Single Inlet

Select Nozzle: (specify thread if other than NH)

Select All That Apply

No Nozzle

5177 Akromatic 1250gpm (4800lpm)

1578 Sabermaster 1250gpm(4800lpm) fog with 2” smooth bore

4040 Akro-Chem 250-1250gpm (950-4800lpm) water/foam & dry chemical nozzle

3626 1000gpm (3800lpm) Master Stream Foam Tube

3626 800gpm (3030lpm) Master Stream Foam Tube

2498 Triple Stack Tip (Requires 3488 or 3485 shaper)

2499 Quad Stack Tip Set (requires 3488 or 3485 shaper)

3485 2.5” x 2.5” mini shaper, 4” long (3482)

3488 2.5” x 2.5” standard shaper 11.5” long (3482)

No Shaper

Select Control Options

Select Any

60412002

60470002

60470010

CAN Tether with Mini Joystick
Stow/Deploy, Osc, Fog/Stream,
& Valve” with Panel Connector

Handheld Wireless Controller

Left/Right, Up/Down, Fog/Stream, & Auxillary

Battery Charger

60410023

60410034

Truck Mount Flange

Select Any

CAN 3 Toggle
Up/Down, Right/Left,
& Fog/Stream

CAN 4 Toggle
Oscillation, Up/Down,
Right/Left, & Fog/Stream

Apollo PE 3419
Order Form

Akron Brass oers pre-engineered cable assemblies to quicken the installation process. These are optional items.
Refer to the example system diagram below to identify which cable assemblies you require, then indicate the quantity
next to the corresponding part number in the list below.

Option #1: Only available if you are using 1 controller other than a handheld wireless.

Internally Terminated Control Cable

Select One

20 Foot 721565

30 Foot 721634

For use with

Toggle Swith Box or

Joystick or Tether

(Only One)

Option #2: When using more than 1 controller other than a handheld wireless.

CAN Network Wiring Assemblies

Quantity Part # Description

Monitor interface harness. Provides

j

1 721589

connection between onboard
controller and CAN network. One
needed per system. 3ft. (1m)

ll

kk

ll

mm

nn

721579

758306

2 742205

721572 3ft. (1m)
721573 5ft. (1.5m)
721574 10ft. (3m)
721570 20ft. (6m)
721575 40ft. (12m)

CAN device stub harness with power
and ground leads 3ft. (1m)

CAN network Tee. Provides connection
between device stubs and network
extension cables.

CAN network terminator plugs.
Two required per system (one at
each end of network)

CAN network extension cables used

Part#

between device tees.

nn

nn

ll

ll

mm

To Vehicle Power

To Vehicle Power

mm

j

kk

kk

Primary Toggle,
Joystick, Tether,
OEM Module
or Position
Indicator

Optional
Secondary
Toggle,
Joystick, Tether,
OEM Module
or Position
Indicator

Send PO & completed order guide to [e-mail] or call 800.228.1161