Akiles ProLam-Ultra User Manual

ProLam ULTRA

6 Roller Photo Pouch Laminator

Professional Grade

Operation Manual

Make sure you read this manual before using the machine.
Store this guide safely, so that you can use it in the future.

Contents

1. Specifications............................................................ 1

2. Safety Precautions................................................. 2-3

3. Lamination Settings Guide....................................... 4

4. Control Layout & Functions..................................... 4

5. Operating Instructions........................................... 5-6

6. Troubleshooting......................................................... 7

7. Warranty Policy.......................................................... 7

1. Specifications

Max. Laminating Width 13” (330 mm)

Max. Laminating Speed 53”/min (1350 mm/min)

Max. Pouch Thickness 14 mil (350 mic)

Max. Laminating Thickness

metsyS gnitaeH

Temperature Control Yes, Keypad

Speed Control 9 Settings

1/8” (3 mm)

Heated Rollers Internal Heating

6 Number of Rollers

0 .pmeT gnitarepO ℃ - 140℃

Yes Reverse Setting

snim 5 emiT gnitaeherP

1000 watts noitpmusnoC rewoP

110-120V or 220-240V

1

(Check label on unit)

gnitaR

21 1/8” x 10 3/4” x 5 1/8” nso isnemiD

2. Safety Precautions

WARNING

Do not use broken, aging or self-made electrical wire. Do not bend, twist or
tie the electrical wire, to avoid the fire or electric shock.

If the power cord is damaged, it must be replaced by the manufacturer or our
service agent or a similar qualified technician.

Do not use a power outlet outlet that is not in accordance with the rated
voltage, to avoid the risk of fire or electric shock.

Do not disassemble, modify or repair the machine yourself.

DO NOT

DISASSEMBLE

Do not wear neckties or necklaces while operating this machine.

If an article becomes stuck in the machine, press the REVERSE
button right away. If this does not work, cut off the power

ENTANGLEMENT

WARNING

supply at once.

ELECTRIC SHOCK

WARNING

HIGH TEMPERATURE

WARNING

Do not open the cover of the machine.

Do not operate the machine with the cover open.

Do not introduce the machine to water.

Do not operate the machine with wet hands.

Unplug the machine from the power supply when moving.

Do not put on top of the laminator while it is in use.

Do not insert objects other than laminating pouches, as they
may burn and give rise to smoke.

Do not touch the cover, rubber rollers or heating part while
the machine is in use.

2