AKG Acoustics CK80 User Manual

CK 80

Capsule Module

Description

The CK 80 is a hypercardioid modular screw-on capsule
with smooth response from 50 Hz to 20 kHz. All Discreet
Series capsules feature pre-polarized condenser elements
with gold plated contacts to ensure reliable connections and
trouble-free performance. The CK80 capsule can be used with
any of the “Discreet Acoustics Modular Series” installation
modules. Each capsule is supplied with a W80 windscreen
that reduces the impinging air stream. This reduction of air
velocity reduces wind noise while maintaining acoustic
transparency.

Specifications

Transducer Principle: Condenser prepolarized

Frequency Range: 60–15,000 Hz

Polar Pattern: Hypercardioid

Sensitivity at 1,000 Hz: 30 mV/Pa ^= -30 dBV*

Equivalent Noise Level: < 17 dB-A

Sound Pressure Level for 1% THD:

125 dB

S/N Ratio (A-weighted): > 76.5 dB

Electr. Impedance: < 600 ohms

Power Requirement: 9 to 52 volts phantom power,

requires DPA adapter
(incl. in GN or HM modules)

Finish: Dark gray matte

Size: 0.5 x 4.9 in. (13 x 128 mm)

Special Features/Applications:

Modular microphone system
for conferencing, theaters,
houses of worship and
many others

Fitting Mounting Modules:

GN 15, GN 15 E, GN 15 ES,
GN 30, GN 30 E, GN 30 ES,
GN 50, GN 50E, GN 50ES,
HM 1000, GN 155 SET

Included Accessories: W80 foam windscreen

Features

• Hypercardioid pickup

• Speech optimized
frequency range

• Screw-on capsule

• Gold plated contacts

• Excellent working distance

• Shotgun type

• Internal shock mount

Microphones · Headphones · Wireless Microphones · Wireless Headphones · Headsets · Electroacoustical Components

Limited Warranty

Valid only in the United States. AKG Acoustics warrants AKG products against defects in material
or workmanship for a period of two years from the date of original purchase for use, and agrees to
repair or, at our option, replace any defective unit without charge for either parts or labor. Important:
This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable
care, the affixing of any attachment not provided with the product, loss of parts or connecting the
product to any but the specified receptacles. This warranty is void unless service or repairs are
performed by an authorized service center. No responsibility is assumed for any special, incidental

or consequential damages. However, the limitation of any right or remedy shall not be effective
where such is prohibited or restricted by law. Simply take or ship your AKG product prepaid to our
service department. Be sure to include your sales slip as proof of purchase date. (We will not repair
transit damage under the no-charge terms of this warranty.) Note: No other warranty, written or oral
is authorized by AKG Acoustics, Inc. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. Some states do not allow the exclusion or
limitation of incidental or consequential damages or limitation on how long an implied warranty
lasts, so the above exclusions and limitation may not apply to you.

Specifications subject to change without notice.

AKG Acoustics GmbH

Lemböckgasse 21–25, P.O.B. 158, A-1230
Vienna/AUSTRIA
Tel: [phone]*, Fax: [phone]
Internet: http://www.akg.com

AKG Acoustics; A Division of Harman Pro Germany
Bodenseestraße 228, D-81243 München/GERMANY
Tel: [phone], Fax: [phone]

Arbiter Pro Audio

Wilberforce Road, London NW9 6AX/ENGLAND
Tel: [phone], Fax: [phone]

AKG ACOUSTICS, U.S.

914 Airpark Center Drive
Nashville, TN 37217, U.S.A.
Tel: [phone], Fax: [phone]

Studer Japan Ltd.

2-43-7, Uehara, Shibuya-ku, Tokyo 151-0064/JAPAN
Tel: [phone], Fax: [phone]

Erikson Pro Audio

620 McCaffrey, St-Laurent, Quebec, H4T 1N1, CANADA
Tel: [phone], Fax: [phone]
Internet: www.jam-ind.com/eriksonpro

AKG is constantly improving and modifying its products, therefore, specifications are subject to change without notice.

The microphone shall be a screw-on hypercardioid capsule that
mates with the AKG Discreet Acoustics Modular Series and shall
have an interference tube section for enhanced directivity at high
frequencies. The microphone shall accept phantom powering over
the universal range from 9 to 52 volts dc. The microphone shall
have a sensitivity no less than 30 mV/Pa (-30 dBV), and the total

harmonic distortion (THD) at an operating acoustical level of 125
dB shall be no greater than 1%. The electrical impedance of the
microphone shall be no greater than 600 ohms. Electrical mating
contacts for mounting the microphone shall be gold plated for
positive, trouble free operation over long periods. The microphone
shall be the AKG Acoustics Model CK 80.

Graphical Data

Architects and Engineers Specifications

5.062” (128 mm)

0.5” (13 mm)

DS-CK 80