Akg B48L User Manual [ru]

Audio frequency range
Gain
Finish
Audio input connector
Audio output connectors

Battery
Noise level
Operating temperature
Dimensions
Net weight

Item Number

20 – 24 000 Hz
0 dB
black
1x XLR 3-pin (f) audio input (48V/10mA)
1x XLR 3-pin (m) audio output
1x mini-XLR (m) audio output
for direct connection to AKG wireless body­pack transmitter
2x AA size batteries (LR6, HR6, FR6)
< 2µV

-10 to 50 °C (14 to 122 °F)
123x65x28.5 mm (4.84x2.56x1.12 in.)
120 g (0.26 lbs)

3163Z00010

Please read the manual before using the equipment!

The B48 L is a battery powered one channel phantom power supply
for P48 condenser microphones. The 48V power supply is for those
applications when a condenser microphone is used where no
phantom power from a mixer is available. The additional mini-XLR
audio output and the included mini-XLR to mini-XLR connection
cable support a direct connection to all AKG body-pack
transmitters. The phantom power of the audio input supplies
microphones with 48V and meet the P48 standard. B48 L is
designed to meet the demand of lowest noise level even in
operation with high-end condenser microphones for professional
applications in theater or touring applications.

Insert two batteries into the battery compartment, aligning the batteries with the
polarity symbols inside the battery compartment. The B48 L provides a polarity
protection. If you insert the batteries the wrong way, the B48 L will not be
powered. Press the ON/OFF button

Green POWER status LED

» Green: Power OK, Phantom power >42V
» Dark: Phantom power <42V

Red LOW BAT status LED

» LR6 alkaline, FR6 lithium batteries: Operation time below 1 hour
» HR6 rechargeable batteries: Operation time below 2 hours

1. Do not spill any liquids on the equipment and do not drop any objects through the
ventilation slots in the equipment.

2. The equipment may be used in dry rooms only.

3. The equipment may be opened, serviced, and repaired by authorized personnel only. The
equipment contains no user-serviceable parts.

4. Operate the equipment with the included AA size dry batteries or the dry or rechargeable
batteries recommended in this manual only.

5. If any solid object or liquid penetrates into the equipment, shut down the sound system
immediately. Remove the batteries from the equipment immediately and have the
equipment checked by AKG service personnel.

6. Do not place the equipment near heat sources such as radiators, heating ducts, or
amplifiers, etc. and do not expose it to direct sunlight, excessive dust, moisture, rain,
mechanical vibrations, or shock.

7. Clean the equipment with a moistened (not wet) cloth only. Be sure to disconnect the
power supply cable from the power outlet before cleaning the equipment! Never use
caustic or scouring cleaners or cleaning agents containing alcohol or solvents since these
may damage the enamel and plastic parts.

8. Use the equipment for the applications described in this manual only. AKG cannot accept
any liability for damages resulting from improper handling or misuse.

9. Any modifications made to the equipment without the express consent of AKG may lead
to violations of telecommunications legislation voicing the operating permit.

1. When scrapping the equipment, separate the case, circuit boards, and cables, and dispose
of all components in accordance with local waste disposal rules.

2. The packaging of the equipment is recyclable. Dispose of the packaging in an appropriate
container provided by the local waste collection/recycling entity and observe all local
legislation relating to waste disposal Environment and recycling.

Printed in Austria.

AKG Acoustics GmbH

Lemböckgasse 21–25, 1230 Vienna, AUSTRIA, e-mail: [e-mail]
For other products and distributors worldwide visit www.akg.com
Features, specifications and appearance are subject to change without notice.

www.akg.com
5028606_A