KONA LHi
The most flexible card for analog and digital Standard and High Definition workflows.
https://www.aja.com/products/kona-lhi
$1,495 US MSRP
KONA LHi - Spec Sheet
09/9/2019 Page 1 of 3
Video Formats
(2K) 2048 x 1080p 23.98, 24, 25
(2K) 2048 x 1080PsF 23.98, 24
(HD) 1080i 50, 59.94, 60
(HD) 1080PsF 23.98, 24
(HD) 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94
Software Dependent Formats
720p 23.98
525i 23.98
Note: These formats are dependent on specific software functionality and
are not normal over the wire formats.
Video Input Digital
3G/SD/HD SDI, SMPTE-259/292/296/424, 8 or 10-bits
Single Link 4:2:2 (1x BNC)
HDMI v1.3 30-bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p 50/60
(1x mini-HDMI)
Video Input Analog
Composite/S-Video (Y/C) (1 x BNC/2x BNC+Adapter)
NTSC, NTSCJ, PAL
Component (3 x BNC)
HD: YPbPr, RGB
SD: YPbPr, RGB (component mode)
SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
12-bit D/A, 8x oversampling
+/- .2 dB to 5.0 MHz Y Frequency Response
+/- .2 dB to 1 MHz C Frequency Response
.5% 2T pulse response
<1% Diff Phase
<1% Diff Gain
<1 ns Y/C delay inequity
Video Output Digital
3G/SD/HD SDI, SMPTE-259/292/296/424
Single Link 4:2:2 or 4:4:4 (1x BNC)
HDMI v1.3 30-bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p 50/60
(1x mini-HDMI)
Video Output Analog
Composite/S-Video (Y/C) (1x BNC/2x BNC+Adapter)
NTSC, NTSCJ, PAL
Component (3x BNC)
HD: YPbPr, RGB
SD: YPbPr, RGB (component mode)
SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
12-bit D/A, 8x oversampling
+/- .2 dB to 5.0 MHz Y frequency response
+/- .2 dB to 1 MHz C frequency response
.5% 2T pulse response
<1% Diff Phase
<1% Diff Gain
<1 ns Y/C delay inequity
Audio Input Digital
8-Channel, 16 and 24-bit SMPTE-259 SDI embedded audio, 48 kHz
sample rate, synchronous
8-Channel, 16 and 24-bit HDMI embedded audio, 48 kHz sample rate,
synchronous
2-Channel, 16 and 24-bit AES/EBU audio, 48 kHz sample rate,
synchronous or nonsynchronous, internal sample rate conversion (via
1x XLR on breakout cable or optional KLHi-Box)
Audio Input Analog
2-Channel, 16 and 24-bit A/D analog audio, 48 kHz sample rate,
balanced (via 2x XLR on DB-25 breakout cable or optional KLHi-Box)
+24 dBu full scale digital
+/- 0.2 dB 20 Hz to 20 kHz frequency response
Audio Output Digital
8-Channel, 16 and 24-bit SMPTE-259 SDI embedded audio, 48 kHz
sample rate, synchronous
8-Channel, 16 and 24-bit HDMI embedded audio, 48 kHz sample rate,
synchronous
2-Channel, 16 and 24-bit AES/EBU audio, 48 kHz sample rate,
synchronous or nonsynchronous, internal sample rate conversion (via
1x XLR on breakout cable or optional KLHi-Box)
Audio Output Analog
2-Channel, 16 and 24-bit D/A analog audio, 48 kHz sample rate,
balanced (via 2x XLR on DB-25 breakout cable or optional KLHi-Box)
+24 dBu full scale digital (0 dBFS)
+/- 0.2 dB 20 Hz to 20 kHz frequency response
2-Channel unbalanced output (via 2x RCA jacks on optional KLHi-Box)
Up-Conversion
Hardware 10-bit
Anamorphic: fullscreen
Pillarbox 4:3: results in a 4:3 image in center of screen with black
sidebars
Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image
with black side bars
Zoom Letterbox: results in image zoomed to fill fullscreen
Zoom Wide: results in a combination of zoom and horizontal stretch to
fill a 16:9 screen; this setting can introduce a small aspect ratio change
Down-Conversion
Hardware 10-bit
Anamorphic: fullscreen
Letterbox: image is reduced with black top and bottom added to
image area with the aspect ratio preserved
Crop: image is cropped to fit new screen size
Cross-Conversion
Hardware 10-bit
1080i to 720p
720p to 1080i
720p to 1080PsF
SD to SD Aspect Ratio Conversion
Letterbox: This transforms SD anamorphic material to a letterboxed
image
H Crop: Will produce a horizontally stretched effect on the image;
transforms anamorphic SD to full frame
SD Pillarbox: Will produce an image in the center of the screen with
black borders on the left and right sides and an anamorphized image
in the center
KONA LHi - Spec Sheet
09/9/2019 Page 2 of 3
Loading...