V2Analog
™
V2Analog is a high-quality, cost-effective digital to analog video converter that’s an ideal solution
for integrating analog equipment such as monitors and tape decks into digital workflows. V2Analog
performs high-quality SDI digital to component or composite analog conversion at either SD or HD
resolutions with a full 10-bit data path. V2Analog takes incoming SDI signals and converts to YPbPr
(SMPTE, EBU-N10), Betacam, or RGB component outputs or NTSC/PAL or Y/C (S-Video) composite
outputs for complete integration into any workflow. Configuration can be set by on unit DIP
switches or remotely via AJA MiniConfig software control over USB.
Note: V2Analog does NOT up-convert or down-convert between SD and HD resolutions. Only digital to
analog signal conversion is supported.
https://www.aja.com/products/v2analog
Video Formats
(HD) 1080i 50, 59.94, 60
(HD) 1080p 23.98, 24, 25, 29.97, 30
(HD) 1080PsF 23.98, 24, 25
(HD) 720p 50, 59.94, 60
(SD) 625i
(SD) 525i
Size (w x d x h)
5.1” × 2.4” × 1.0” (129.54 × 60.96 × 25.4 mm)
Power
+5-20 VDC, 3 watts
Environment
Input
HD/SD-SDI, SMPTE-259/292/296M, 1x BNC
Outputs
Safe Operating Temperature: 0 to 40 C (32 to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet)
$345 US MSRP
HD component YPbPr, RGB (SMPTE-274), BNC
SD component (Betacam, EBU-N10)/composite/YC (S-Video), BNC
User Controls
External Dipswitch
Control (Local/Remote)
Component/Composite (SD Only)
Format (YPbPr/YC or RGB)
Pedestal Present (on/off) (SD Only)
V2Analog™ - Spec Sheet
08/19/2019 Page 1 of 1
Loading...