12GM Mini-Converter
12G-SDI to/from SDI Muxer/DeMuxer
Installation and Operation Guide
Version 1.4
Published April 2, 2019
Notices
Trademarks
Copyright
AJA® and Because it matters.® are registered trademarks of AJA Video Systems, Inc.
for use with most AJA products. AJA™ is a trademark of AJA Video Systems, Inc. for
use with recorder, router, software and camera products. Because it matters.™ is a
trademark of AJA Video Systems, Inc. for use with camera products.
CION®, Corvid Ultra®, lo®, Ki Pro®, KONA®, KUMO®, ROI® and T-Tap® are registered
trademarks of AJA Video Systems, Inc.
AJA Control Room™, KiStor™, Science of the Beautiful™, TruScale™, TruZoom™,
V2Analog™ and V2Digital™ are trademarks of AJA Video Systems, Inc.
All other trademarks are the property of their respective owners.
Copyright © 2019 AJA Video Systems, Inc. All rights reserved. All information in
this manual is subject to change without notice. No part of the document may be
reproduced or transmitted in any form, or by any means, electronic or mechanical,
including photocopying or recording, without the express written permission of AJA
Video Systems, Inc.
Contacting AJA Support
When calling for support, have all information at hand prior to calling. To contact AJA
for sales or support, use any of the following methods:
Telephone +1.530.271.3190
FAX +1.530.271.3140
Web https://www.aja.com
Support Email support@aja.com
Sales Email sales@aja.com
12GM Mini-Converter v1.4 2 www.aja.com
Table of Contents
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Contacting AJA Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 1 – Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
I/O Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2 – Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
USB Control and Setup—Using AJA Mini-Cong . . . . . . . . . . . . . . . . . . . 7
Acquiring AJA Mini-Cong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Mini-Converter Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installing AJA Mini-Cong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PC Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Mac Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Running AJA Mini-Cong. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PC Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Mac Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Saving Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operating AJA Mini-Cong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Tabbed Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Input Tab Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Input Detail Tab Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Timing Tab Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Output Tab Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Output Detail Tab Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Update Tab Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Software Update Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Info Tab Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Appendix A – Specications . . . . . . . . . . . . . . . . . . . . . . . . 23
Appendix B – Safety and Compliance . . . . . . . . . . . . . . . . . .25
Five Year Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Limited Warranty on Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Governing Law and Language; Your Rights. . . . . . . . . . . . . . . . . . . . . 34
12GM Mini-Converter v1.4 3 www.aja.com
Chapter 1 – Introduction
Overview
Features
12GM is a compact SDI transport converter that can solve a wide range of
UltraHD/4K equipment inter-connection problems. The product will convert
quad-link SDI signals to single-link SDI (Mux function) as well as single-link SDI to
quad-link SDI (Demux function).
12GM also supports Two Sample Interleave (2SI) to Square Division (Quadrant)
and Square Division (Quadrant) to Two Sample Interleave (2SI) pixel mapping.
The 12GM is configured using the free AJA Mini-Config application, which also
provides detailed input and output signal diagnostic information.
• UltraHD/4K SDI Transport Converter
• 4 x 1.5G-SDI to 6G-SDI
• 4 x 3G-SDI to 12G-SDI
• 6G-SDI to 4 x 1.5G-SDI
• 12G-SDI to 4 x 3G-SDI
• Two Sample Interleave (2SI) to Square Division (Quadrant) pixel mapping
• Square Division (Quadrant) to Two Sample Interleave (2SI) pixel mapping
• Automatic or manual control
• Detailed input signal diagnostics
• Detailed output signal information
• Detailed timing analysis for validating alignment of quad-link SDI inputs
• Distribution Amplier support (1 x 4)
• Passes SDI embedded audio
12GM Mini-Converter v1.4 4 www.aja.com
• Recognizes and transmits High Dynamic Range (HDR) and Wide Color Gamut
(WCG) signaling on VPID
• DWP-U-R1 power supply included
• Five year warranty
Block Diagram
Figure 1. 12GM Converter, Simplified Block Diagram
SDI Input 1
SDI Input 2
SDI Input 3
SDI Input 4
I/O Connections
Figure 2. 12GM Converter Connections
SDI Input 1
SDI Input 2
SDI Input 3
SDI Receiver
SDI Receiver
SDI Receiver
SDI Receiver
SDI
Processing
SDI Transmitter
SDI Transmitter
SDI Transmitter
SDI Transmitter
SDI Output 1
SDI Output 2
SDI Output 3
SDI Output 4
SDI Output 1
SDI Output 2
SDI Output 3
SDI Output 4
SDI Input 4
USB Port
+5-20 VDC
Power
Input
NOTE: The LEDs adjacent to each SDI input connector indicate by color the detected
signal type. Off is no signal, Green is SD-SDI, Red is HD-SDI, Amber is 3G-SDI,
Purple is 6G-SDI, and Blue is 12G-SDI.
Installation
Typically, 12GM installation consists of the following steps:
1. Ensure the 12GM is disconnected from power.
12GM Mini-Converter v1.4 5 www.aja.com
2. Connect video equipment to the converter BNC connectors.
3. Apply power to the converter (AJA power supply included).
4. The 12GM will now run using the default factory settings. If you wish to alter
the factory settings, you’ll need to:
• Install the AJA Mini-Cong software on your computer
• Attach the 12GM via USB
• Make your changes using AJA Mini-Cong setup screens.
This process is detailed in "USB Control and Setup—Using AJA Mini-Config" on page
7.
NOTE: The 12GM packs an unprecedented feature set into a mini converter box. As a
result, the unit uses approximately 12 watts of power. It will be very warm to
the touch, which is normal. The unit is engineered to operate across the full
temperature range, from 0 to 40 degrees C.
NOTE: For highest reliability, the mini converter relies on convection cooling instead
of using a built-in fan. Therefore, when installing the unit, mount in a location
where it has access to air for proper cooling. Do not stack the 12GM with other
mini converters.
12GM Mini-Converter v1.4 6 www.aja.com
Chapter 2 – Operation
USB Control and Setup—Using AJA Mini-Config
Your AJA Mini-Converter can be used right out of the box for some applications
since it is designed to recognize inputs and perform standard actions
automatically by default. However, to use its full capability, you must use AJA’s
Mini-Config software application for PCs and Macs. This same application can be
used to update to new Mini-Converter software released by AJA.
Acquiring AJA Mini-Config
AJA’s Mini-Config application is available for download from the AJA website.
To download the latest AJA Mini-Config package, which includes the AJA MiniConfig application, Mini-Converter firmware, and documentation, go to:
https://www.aja.com/en/products/mini-converters/mini-cong-software
Select either the Windows or Mac icon to download the desired version.
Mini-Converter Documentation
Included with the AJA Mini-Config package is a complete set of documentation
for all Mini-Converters supported by AJA Mini-Config. A .PDF of the Installation
and Operation Guide for the currently connected Mini-Converter can be accessed
from the AJA Mini-Config UI via the Help/Manual drop-down menu.
Documentation for all AJA Mini-Converters that use AJA Mini-Config can also
be accessed directly in the AJA Mini-Config download package Documentation
folder, and via the Documentation icon available on the Mac installer.
Documentation (and firmware) included with the AJA Mini-Config application
are the versions available at the time of distribution. However, Mini-Converter
software, firmware and documentation are updated regularly, so newer versions
may exist.
To download the latest documentation for an individual Mini-Converter, go to:
https://www.aja.com/en/category/mini-converters
and navigate to the Support webpage of that Mini-Converter.
Installing AJA Mini-Config
PC Installation
To install AJA Mini-Config on a Windows PC:
1. Download the application from the AJA website (select the Windows icon
on the AJA Mini-Cong Support webpage).
2. Open the AJA_MiniCong.zip le
3. Double-click on the MiniInstaller.msi le.
4. A Setup Wizard will guide you through the installation.
12GM Mini-Converter v1.4 7 www.aja.com
Figure 3. AJA Mini-Config PC Setup Wizard
5. Click Next to begin. Answer the questions in the subsequent dialogues.
When nished, an AJA Mini-Cong shortcut will be installed on the desktop,
and you will be able to locate the AJA Mini-Cong application in the AJA
folder in the Programs listing.
NOTE: If the AJA Mini-Config application already exists on the PC, a different Setup
Wizard appears.
Figure 4. AJA Mini-Config Setup Wizard, Reinstallation
With this screen you can Repair (reinstall) or Remove (uninstall) AJA Mini-Config
on the PC.
Mac Installation
To install the application on a Mac:
NOTE: Macintosh computers must be Intel-based (G5, G4 and earlier models will not
work with AJA Mini-Config).
1. Download the application from the AJA website (select the Apple icon on
the AJA Mini-Cong Support webpage).
2. Open the AJA_MiniCong folder.
3. Double-click on the AJAMiniCong.dmg le.
12GM Mini-Converter v1.4 8 www.aja.com
4. Answer the prompt and a utility program will be launched.
Figure 5. AJA Mini-Config Mac Installer
5. To complete the installation drag the “MiniCong.app” icon to the
Applications folder.
Running AJA Mini-Config
Connect the Mini-Converter to the PC or Mac via the supplied USB cable. Connect
the external power supply (supplied) to the Mini-Converter.
PC Startup
To run AJA Mini-Config on a PC, double-click on the AJA Mini-Config icon on your
desktop, or open the AJA folder in the program list and click on the AJA MiniConfig application located inside the AJA Mini-Config folder.
Mac Startup
To run AJA Mini-Config on a Mac, open the Applications folder and locate the AJA
Mini-Config application. Double-click the application to launch it.
Saving Setups
A File drop down menu on the AJA Mini-Config application bar allows you to
save the current state of the Mini-Converter to a preset file for later recall.
12GM Mini-Converter v1.4 9 www.aja.com
Using this feature you can set up the converter for different applications, storing
each configuration (Save Preset As...) with a unique name for easy recall (Open
Preset...).
A Revert to Factory Settings menu item similarly allows you to change the
settings back to AJA’s factory defaults.
Operating AJA Mini-Config
The AJA Mini-Config application provides a graphic interface for viewing settings
and updating software. It consists of an information area at the top that shows
the available Mini-Converters attached to the computer via USB, with a graphical
rendering of the selected Mini-Converter showing all the connectors and their
current state.
Colored text next to the connectors indicates the signal type and what the MiniConverter is doing:
• Blue text indicates the values automatically selected
• Black text indicates values that you have manually selected
• Red text indicates the Mini-Converter is not detecting a signal, or cannot
operate with the current user settings.
NOTE: Even if no output device is detected, the SDI connector text still shows the signal it
is outputting.
NOTE: Configuration settings in red will change based on the attached output device as
well as input signals. For improved accuracy and reliability, you should configure
the Mini-Converter only when the target output device is attached and input
signals are supplied at the inputs.
Screens are virtually the same on both PC and Mac, with subtle differences that
reflect the general look of the platform environment.
12GM Mini-Converter v1.4 10 www.aja.com
Select a USB port and
an attached
Mini-Converter (name
in parentheses).
The status represents
the aggregate signal
currently detected
by one or four
connectors.
Firmware Version
and Serial Number
Tabbed Screens
Figure 6. Example AJA Mini-Config Screen
Status Message
Tabbed Screens
NOTE: The LEDs adjacent to each SDI input connector indicate by color the detected
signal type. Off is no signal, Green is SD-SDI, Red is HD-SDI, Amber is 3G-SDI,
Purple is 6G-SDI, and Blue is 12G-SDI.
Selecting a Mini-Converter with the pulldown menu causes this application to
connect to the selected converter. The graphic of Mini-Converter and text below
it provides:
• Type of converter
• Firmware version
• Serial number of the unit.
A status field at the bottom of the screen shows if your application is connected
and communicating with the Mini-Converter.
When configuring the Mini-Converter, select it from the top pulldown, view the
current settings and change any values. Making a change communicates that
new value to the Mini-Converter’s non-volatile memory.
The Tabs delineate control screens with groups of controls for each type of task to
be performed. The controls for the actual configuration parameters are specific
to each Mini-Converter type. When you Click on any of the tab buttons, the pane
below the tabs will change to match your tab selection. Any changes you make
are immediately applied and will be saved, overwriting previous settings.
12GM Mini-Converter v1.4 11 www.aja.com
Input Tab Screen
Figure 7. Example of Input Tab Screen showing Quad 3G-SDI to Single 12G-SDI
conversion using Square Division (Quadrant) to Two Sample Interleave (2SI)
pixel mapping.
Click on the Input tab to view and make changes to the converter’s input settings.
Input SDI
Selects the input video format. Choose from the following:
Auto - Automatically selects the format based on the detected input video
parameters. To the right of the drop-down menu, the status display reflects
the current Input SDI behavior.
In order for "Auto" to select Quad Link (SDI 1-4), all four inputs must match in
terms of data rate, link mapping, raster, frame rate, scan type, sampling, bit
depth, and pixel mapping.
Single Link (SDI 1) - Select this option if you have a Single Link UltraHD/4K signal
coming in through SDI In 1.
Quad Link (SDI 1-4) - Select this option if you have a Quad Link UltraHD/4K signal
coming in through SDI In 1-4.
Input Mapping
NOTE: Input pixel mapping applies only to 4K/UltraHD signals being transported on
Quad Link 4 x 3G inputs, as 6G and 12G SDI are always Two Sample Interleave
(2SI), and Quad Link 1.5G SDI is always Square Division (Quadrant).
For 4K/UltraHD signals using Quad Link 3Gbps transport, the Video Payload
Identifier (VPID) embedded in each link indicates whether the pixel mapping
is 2SI or not. If 2SI is not indicated, the 12GM assumes that the input signal is
mapped Square Division (Quadrant). Note that there are no specific VPID bits to
indicate Square Division (Quadrant).
Use the Input Mapping control to select the input mapping. Choose from the
following:
12GM Mini-Converter v1.4 12 www.aja.com
Auto - Analyzes details of each input. The VPID from each input signal indicates
whether its pixel mapping is Two Sample Interleave (2SI) or Square Division
(Quadrant).
In order for "Auto" to select 2SI pixel mapping, the video input (whether
single link 6G-SDI or 12G-SDI, or Quad Link 3G-SDI) must indicate 2SI with its
embedded VPID(s).
2SI - Select this option if you are inputting a Two Sample Interleave (2SI) pixel
mapped signal.
SQD - Select this option if you are inputting a Square Division (Quadrant) pixel
mapped signal.
Figure 8. Example of Input Tab Screen showing Single 12G-SDI to Quad 3G-SDI
conversion.
12GM Mini-Converter v1.4 13 www.aja.com
Input Detail Tab Screen
Figure 9. Example of Input Detail Tab Screen showing Single 12G-SDI to Quad
3G-SDI conversion.
Figure 10. Example of Input Detail Tab Screen showing Quad 3G-SDI to
Single 12G-SDI conversion using Square Division (Quadrant) to Two Sample
Interleave (2SI) pixel mapping.
Click on the Input Details tab to view detailed input signal diagnostic information.
This can be useful for trouble-shooting and debugging. Input details detected
include Status, Standard, Scan Type, Frame Rate, Data Rate, Level, Sampling, Bit
Depth, and Mapping for each input BNC.
12GM Mini-Converter v1.4 14 www.aja.com
Timing Tab Screen
Figure 11. Example of Timing Tab Screen showing Quad 3G-SDI to Single
12G-SDI conversion using Square Division (Quadrant) to Two Sample
Interleave (2SI) pixel mapping.
The purpose of the Timing Tab Screen is to validate that all four links of a Quad
Link input signal meet the required 400ns link-to-link timing, and if not, which
link(s) are not meeting this specification.
The Timing Tab Screen measures timing differences link to link, but displays
timing values relative to SDI 1 for ease of understanding and correcting timing
issues. If the SDI In 1, 2, 3, and 4 links are within +/- 400ns relative to each other,
then the text will be blue. If two or more links are determined to be more than
+/- 400ns relative to each other, then the text is red. The Timing analyzer has a
measurement range of +/- 1/2 frame.
The first row of the Pixels Timing information indicates any horizontal offset
in terms of pixels for each link, while the second row of the Pixels Timing
information indicates the horizontal offset in terms of microseconds. The two
rows display the same information represented in different terms (pixels versus
microseconds). The pixel information (pixels and time) indicates offset of up to 1
line. If the offset exceeds 1 line, then the line count is incremented.
The Total row displays each link's total offset (vertical timing plus horizontal
offset) in terms of time.
12GM Mini-Converter v1.4 15 www.aja.com
Figure 12. Example of Timing Tab Screen showing Quad 3G-SDI to Single
12G-SDI conversion using Square Division (Quadrant) to Two Sample
Interleave (2SI) pixel mapping. In this example, a timing error message
displays.
The above Timing Tab Screen shows that links 2, 3, and 4 are equally advanced
with respect to link 1 by about 60 pixels. Since all three links are equally
advanced, most likely link 1 has an additional function element (piece of
processing equipment or additional processing function) which is delaying it 60
lines—so links 2, 3, and 4 appear advanced.
To solve this error, the signal chain feeding SDI Input 1 needs to be analyzed
to determine the cause of the delay. Once found, the delay should be reduced
enough so that it is less than 400ns between links 1 and 2, 1 and 3, and 1 and 4.
12GM Mini-Converter v1.4 16 www.aja.com
Output Tab Screen
Figure 13. Example of Output Tab Screen showing Quad 3G-SDI to Single
12G-SDI conversion using Square Division (Quadrant) to Two Sample
Interleave (2SI) pixel mapping.
Click on the Output tab to view and make changes to the converter’s output
settings.
Output SDI
Auto - Automatically selects the output format based on the inputs detected.
If Quad Link UltraHD/4K (SDI 1-4) is detected on the input, the output will
auto-select to a Single Link (SDI 1) multiplex output.
If Single Link UltraHD/4K (SDI 1) is detected on the input, the output will autoselect to a Quad Link (SDI 1-4) to demux the signal to four outputs using SDI
Outputs 1-4.
Single Link (SDI 1) - Causes the 12GM to use only SDI Output 1. The combination
of input and output settings determines whether the 12GM is muxing,
demuxing or passing through.
Quad Link (SDI 1-4) - Causes the 12GM to use SDI Outputs 1-4, if possible. The
combination of input and output settings determines whether the 12GM is
muxing, demuxing or passing through.
Output Mapping
NOTE: Output pixel mapping applies only to 4K/UltraHD signals being transported
on Quad Link 4 x 3G outputs, as 6G and 12G SDI are always Two Sample
Interleave (2SI), and Quad Link 1.5G SDI is always Square Division (Quadrant).
Selects the output mapping for Quad Link 4 x 3G outputs. Choose from the
following:
Auto - Automatically selects the output pixel mapping based on the input pixel
mapping detected.
12GM Mini-Converter v1.4 17 www.aja.com
If the 4K/UHD input is Two Sample Interleave (2SI), the output pixel mapping
will be Square Division (Quadrant) if supported.
If the 4K/UHD input is Square Division (Quadrant), the output pixel mapping
will be Two Sample Interleave (2SI) if supported.
2SI - Causes the 12GM to output a Two Sample Interleave (2SI) pixel mapped
signal, if supported.
SQD - Causes the 12GM to output a Square Division (Quadrant) pixel mapped
signal, if supported.
DA Function
The 12GM's Distribution Amplifier (DA) function is available for Single Link output
signals.
On - When turned on, the DA function will duplicate SDI Output 1's signal on SDI
Outputs 2, 3, and 4.
NOTE: If the output is a Quad Link signal, the DA function is overridden and turned
off.
Off - When turned off, no signal duplication will occur.
Figure 14. Example of Output Tab Screen showing Single 12G-SDI to Quad
3G-SDI conversion using Two Sample Interleave (2SI) to Square Division
(Quadrant) pixel mapping.
12GM Mini-Converter v1.4 18 www.aja.com
Figure 15. Example of Output Tab Screen showing the output set to Single Link
12G-SDI. The DA Function is turned on, duplicating the 12G-SDI input signal
and sending it out through all four SDI outputs.
Output Detail Tab Screen
Figure 16. Example of Output Detail Tab Screen showing Quad 3G-SDI to
Single 12G-SDI conversion using Square Division (Quadrant) to Two Sample
Interleave (2SI) pixel mapping.
Click on the Output Details tab to view detailed output signal diagnostic
information. This can be useful for trouble-shooting and debugging. Output
12GM Mini-Converter v1.4 19 www.aja.com
signal details include Status, Standard, Scan Type, Frame Rate, Data Rate, Level,
Sampling, Bit Depth, and Mapping for each output BNC.
Figure 17. Example of Output Detail Tab Screen showing Single 12G-SDI to
Quad 3G-SDI conversion using Square Division (Quadrant) to Two Sample
Interleave (2SI) pixel mapping.
Update Tab Screen
Use this Update tab screen to view the software version currently installed on the
converter or to install new software.
12GM Mini-Converter v1.4 20 www.aja.com
NOTE: When discussing Mini-Converters, “Firmware” is software that will be stored in
the Mini-Converter’s non-volatile memory and used when it is powered up. This is
something different than the AJA Mini-Config application software. The version
numbers shown in the Update screen refer only to the firmware.
Installed - This field shows the version of the firmware currently installed inside
the Mini-Converter.
Desired - This field shows the version of firmware embedded in the AJA Mini-
Config application which you can install into the Mini-Converter by clicking
the Update button.
Update
This button initiates a software update operation loading the “Desired” version of
firmware into the Mini-Converter’s non-volatile memory.
Progress - This indicator bar shows the progress of firmware installation.
Software Update Procedure
1. Check the AJA website for new AJA Mini-Cong software for your MiniConverter. If new software is found, download it and uncompress the le
archive (zip). Here is the URL to use when checking:
http://www.aja.com/en/products/mini-converters/mini-cong-software
2. Connect the Mini-Converter to a Mac or PC via a USB port on the computer
and run the new AJA Mini-Cong software just downloaded.
3. Click on the Update tab screen.
4. Check the Installed version level against the Desired version level. If the
Desired is newer, then click the Update button to download the new
rmware to the Mini-Converter; progress will be shown via the “Progress”
thermometer bar.
Info Tab Screen
12GM Mini-Converter v1.4 21 www.aja.com
This screen provides basic information about the Mini-Converter. This information
is useful when calling AJA Support for service or technical support.
Name
This field allows you to give your Mini-Converter a name. This can be useful if you
have several Mini-Converters attached to a Mac/PC via USB so you can distinguish
between them easily (especially if they’re the same model).
Typ e - This is the factory set model name of the Mini-Converter.
Assembly - This is the factory assembly number.
Serial Number - This is the factory set unique serial number of your Mini-
Converter. If you ever call AJA Support for service, you may be asked for this
number.
12GM Mini-Converter v1.4 22 www.aja.com
Appendix A – Specifications
12GM Tech Specs
Video Formats
• (4K) 4096 x 2160p
• (UltraHD) 3840 x 2160p
• (2K) 2048 x 1080p
• (HD) 1920 x 1080p
• (HD) 1920 x 1080i
• (HD) 1280 x 720p
• (SD) 720 x 576i
• (SD) 720 x 480i
Video Input/Output Digital
• 4x 12G-SDI BNC, SMPTE 259/292/424/2081/2082
• YCbCr 4:2:2
• 8 or 10-bit
• Two Sample Interleave (2SI) or Square Division (Quadrant) input and output
mapping
• 1x 12 Gb SDI
• 4x 3 Gb SDI (Level A)
• (4K) 4096 x 2160p 50, 59.94, 60
• (UltraHD) 3840 x 2160p 50, 59.94, 60
• 1x 6 Gb SDI
• 4x 1.5 Gb SDI
• (4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30
• (UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30
• 1x 3 Gb SDI (Level A)
• (2K) 2048 x 1080p 50, 59.94, 60
• (HD) 1920 x 1080p 50, 59.94, 60
• 1x 1.5 Gb SDI
• (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30
• (2K) 2048 x 1080PsF 23.98, 24, 25, 29.97, 30
• (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30
• (HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
• (HD) 1920 x 1080i 50, 59.94, 60
• (HD) 1280 x 720p 50, 59.94, 60
• 1x 270 Mb SDI
• (SD) 625i 50
• (SD) 525i 59.94
Supported Conversions and Functions
• Quad 3G-SDI to Single 12G-SDI
• Single 12G-SDI to Quad 3G-SDI
• Quad 1.5G-SDI to Single 6G-SDI
• Single 6G-SDI to Quad 1.5G-SDI
• Two Sample Interleave (2SI) to Square Division (Quadrant) pixel mapping
• Square Division (Quadrant) to Two Sample Interleave (2SI) pixel mapping
12GM Mini-Converter v1.4 23 www.aja.com
• Pass through of Single Link 3G, 1.5G and 270M SDI video
• Distribution Amplier support (1x4)
• Input signal diagnostics
• Input timing analyzer for quad link signals
Cable Equalization
(Belden 1694A coax)
• 12 Gbps, 70m
• 6 Gbps, 100m
• 3 Gbps, 140m
• 1.5 Gbps, 200m
• 270 Mbps, 300m
Audio Input/Output Digital
• Passes SDI embedded audio, 24-bit, up to 16-Channels
User Interface
• USB port used with supplied cable and Mini-Cong software application to
congure device and access diagnostics via macOS or Windows.
Size (w x d x h)
• 5.76" x 4.02" x 0.90" (146.31 × 102.11 × 22.86 mm)
Weight
Power
Environment
• 0.6 lb (0.3 kg)
• 5-20VDC regulated, 12 watts, power supply required, included with purchase
• AC Adapter: 100-240VAC, 50/60 Hz, universal input
• Safe Operating Temperature: 0 to 40 C (32 to 104 F)*
• Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
• Operating Relative Humidity: 10-90% noncondensing
• Operating Altitude: <3,000 meters (<10,000 feet)
* 12GM uses approximately 12 watts of power and convection cooling. It will be
very warm to the touch, which is normal. When installing the unit, mount in a
location where it has access to air for proper cooling. Do not stack the 12GM with
other Mini-Converters.
12GM Mini-Converter v1.4 24 www.aja.com
Appendix B – Safety and Compliance
Federal Communications Commission (FCC) Compliance Notices
Class A Interference Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15, Subpart B of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Canadian ICES Statement
Canadian Department of Communications Radio Interference Regulations
This digital apparatus does not exceed the Class A limits for radio-noise emissions
from a digital apparatus as set out in the Radio Interference Regulations of
the Canadian Department of Communications. This Class A digital apparatus
complies with Canadian ICES-003.
Règlement sur le brouillage radioélectrique du ministère des Communications
Cet appareil numérique respecte les limites de bruits radioélectriques visant les
appareils numériques de classe A prescrites dans le Règlement sur le brouillage
radioélectrique du ministère des Communications du Canada. Cet appareil
numérique de la Classe A est conforme à la norme NMB-003 du Canada.
European Union and European Free Trade Association (EFTA)
Regulatory Compliance
This equipment may be operated in the countries that comprise the member
countries of the European Union and the European Free Trade Association. These
countries, listed in the following paragraph, are referred to as The European
Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA,
FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA,
LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL,
ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND,
LICHTENSTEIN, NORWAY, SWITZERLAND
12GM Mini-Converter v1.4 25 www.aja.com
Declaration of Conformity
Marking by this symbol indicates compliance with the Essential Requirements of
the EMC Directive of the European Union 2014/30/EU.
This equipment meets the following conformance standards:
Safety
EN 60065: 2014 (T-Mark License)
IEC 60065: 2014 (CB Scheme Report/Certicate)
Additional licenses issued for specic countries available on request.
Emissions
EN 55032: 2012, CISPR 32: 2015,
EN 61000-3-2: 2014, EN 61000-3-3: 2013
Immunity
EN 55103-2: 2009
EN 61000-4-2: 2009, EN 61000-4-3: 2006 + A1: 2008 + A2: 2010,
EN 61000-4-4: 2004 + A1: 2010, EN 61000-4-5: 2006, EN 61000-4-6: 2009,
EN 61000-4-11: 2004
Environments: E2, E3 and E4
The product is also licensed for additional country specic standards as required
for the International Marketplace
Warning! This is a Class A product. In a domestic environment, this product
Achtung! Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen
Attention! Ceci est un produit de Classe A. Dans un environnement domestique,
Recycling Notice
This symbol on the product or its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is
your responsibility to dispose of your waste equipment by handing it over
to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop o your waste
for recycling, please contact your local authority, or where you purchased
your product.
may cause radio interference, in which case, the user may be required to take
appropriate measures.
können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten, in welchen
Fällen der Benutzer für entsprechende Gegenmaßnahmen verantwortlich ist.
ce produit risque de créer des interférences radioélectriques, il appartiendra
alors à l?utilisateur de prendre les mesures spéciques appropriées..
12GM Mini-Converter v1.4 26 www.aja.com
Korea KCC Compliance Statement
A급기기
(업무용 방송통신기자재)
Class A
(Broadcasting Communication
Equipment for Office Use)
Taiwan Compliance Statement
This is a Class A product based on the standard of the Bureau of Standards,
Metrology and Inspection (BSMI) CNS 13438, Class A. In a domestic environment
this product may cause radio interference in which case the user may be required
to take adequate measures.
Japan Compliance Statement
이 기기는 업무용(A급) 전자파적합기기로서 판매자또는 사용자는
이점을주의하시기 바라며, 가정외의 지역에서사용하는것을
목적으로 합니다.
As an electromagnetic wave equipment for office use (Class A),
this equipment is intended to use in other than home area.
Sellers or users need to take note of this.
This is a Class A product based on the standard of the VCCI Council (VCCI32:2016).
If this equipment is used in a domestic environment, radio interference may
occur, in which case, the user may be required to take corrective actions.
Translated Warning and Caution Messages
The following caution statements, warning conventions, and warning messages
apply to this product and manual.
12GM Mini-Converter v1.4 27 www.aja.com
Before Operation Please Read These Instructions
Warning! Read and follow all warning notices and instructions marked on the
product or included in the documentation.
Avertissement! Lisez et conformez-vous à tous les avis et instructions
d'avertissement indiqués sur le produit ou dans la documentation.
Warnung! Lesen und befolgen Sie die Warnhinweise und Anweisungen, die auf
dem Produkt angebracht oder in der Dokumentation enthalten sind.
¡Advertencia! Lea y siga todas las instrucciones y advertencias marcadas en el
producto o incluidas en la documentación.
Aviso! Leia e siga todos os avisos e instruções assinalados no produto ou
incluídos na documentação.
Avviso! Leggere e seguire tutti gli avvisi e le istruzioni presenti sul prodotto o
inclusi nella documentazione.
Warning! Do not use this device near water and clean only with a dry cloth.
Avertissement! N'utilisez pas cet appareil près de l'eau et nettoyez-le seulement
avec un tissu sec.
Warnung! Das Gerät nicht in der Nähe von Wasser verwenden und nur mit
einem trockenen Tuch säubern.
¡Advertencia! No utilice este dispositivo cerca del agua y límpielo solamente
con un paño seco.
Aviso! Não utilize este dispositivo perto da água e limpe-o somente com um
pano seco.
Avviso! Non utilizzare questo dispositivo vicino all'acqua e pulirlo soltanto con
un panno asciutto.
Warning! Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Avertissement! Ne bloquez aucune ouverture de ventilation. Suivez les
instructions du fabricant lors de l'installation.
Warnung! Die Lüftungsönungen dürfen nicht blockiert werden. Nur gemäß
den Anweisungen des Herstellers installieren.
¡Advertencia! No bloquee ninguna de las aberturas de la ventilación. Instale de
acuerdo con las instrucciones del fabricante.
Aviso! Não obstrua nenhuma das aberturas de ventilação. Instale de acordo com
as instruções do fabricante.
Avviso! Non ostruire le aperture di ventilazione. Installare in conformità con le
istruzioni del fornitore.
12GM Mini-Converter v1.4 28 www.aja.com
Warning! Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
Avertissement! N'installez pas l'appareil près d'une source de chaleur telle que
des radiateurs, des bouches d'air de chauage, des fourneaux ou d'autres
appareils (amplicateurs compris) qui produisent de la chaleur.
Warnung! Nicht in der Nähe von Wärmequellen wie Heizkörpern, Heizregistern,
Öfen oder anderen Wärme erzeugenden Geräten (einschließlich Verstärkern)
aufstellen.
¡Advertencia! No instale cerca de fuentes de calor tales como radiadores,
registros de calor, estufas u otros aparatos (incluidos amplicadores) que
generan calor.
Aviso! Não instale perto de nenhuma fonte de calor tal como radiadores, saídas
de calor, fogões ou outros aparelhos (incluindo amplicadores) que produzam
calor.
Avviso! Non installare vicino a fonti di calore come termosifoni, diusori di aria
calda, stufe o altri apparecchi (amplicatori compresi) che emettono calore
Warning! Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does
not t into your outlet, consult an electrician for replacement of the obsolete
outlet.
Avertissement! La sécurité de la prise polarisée ou de la prise de type mise à la
terre ne doit en aucun cas être empêchée de fonctionner. Une prise polarisée
a deux broches, l'une étant plus large que l'autre. Une prise de type mise à la
terre a deux broches et une troisième broche pour la mise à la terre. La broche
large ou la troisième broche sont fournies pour votre sécurité. Si la prise
fournie ne s'insère pas dans votre prise femelle, consultez un électricien pour
le remplacement de la prise femelle obsolète.
Warnung! Der Sicherheitszweck des gepolten bzw. Schukosteckers ist zu
berücksichtigen. Ein gepolter Stecker verfügt über zwei Pole, von denen einer
breiter als der andere ist. Ein Schukostecker verfügt neben den zwei Polen
noch über einen dritten Pol zur Erdung. Der breite Pol bzw. der Erdungspol
dienen der Sicherheit. Wenn der zur Verfügung gestellte Stecker nicht in Ihren
Anschluss passt, konsultieren Sie einen Elektriker, um den veralteten Anschluss
zu ersetzen.
¡Advertencia! No eche por tierra la nalidad del tipo de enchufe polarizado con
conexión a tierra. Un enchufe polarizado tiene dos espigas, una más ancha
que la otra. Un enchufe con conexión a tierra tiene dos espigas iguales y una
tercera espiga que sirve para la conexión a tierra. La expiga ancha, o la tercera
espiga, sirven para su seguridad. Si el enchufe suministrado no encaja en el
tomacorriente, consulte con un electricista para reemplazar el tomacorriente
obsoleto.
Aviso! Não anule a nalidade da segurança da cha polarizada ou do tipo
ligação terra. Uma cha polarizada tem duas lâminas sendo uma mais larga
do que a outra. Uma cha do tipo de ligação à terra tem duas lâminas e um
terceiro terminal de ligação à terra. A lâmina larga ou o terceiro terminal são
fornecidos para sua segurança. Se a cha fornecida não couber na sua tomada,
consulte um electricista para a substituição da tomada obsoleta.
Avviso! Non compromettere la sicurezza della spina polarizzata o con messa a
terra. Una spina polarizzata ha due spinotti, di cui uno più largo. Una spina con
messa a terra ha due spinotti e un terzo polo per la messa a terra. Lo spinotto
largo o il terzo polo sono forniti per motivi di sicurezza. Se la spina fornita non
si inserisce nella presa di corrente, contattare un elettricista per la sostituzione
della presa obsoleta.
12GM Mini-Converter v1.4 29 www.aja.com
Warning! Since the Mains plug is used as the disconnection for the device, it
must remain readily accessible and operable.
Avertissement! Puisque la prise principale est utilisée pour débrancher
l'appareil, elle doit rester aisément accessible et fonctionnelle.
Warnung! Da der Netzstecker als Trennvorrichtung dient, muss er stets
zugänglich und funktionsfähig sein.
¡Advertencia! Puesto que el enchufe de la red eléctrica se utiliza como
dispositivo de desconexión, debe seguir siendo fácilmente accesible y
operable.
Aviso! Dado que a cha principal é utilizada como a desconexão para o
dispositivo, esta deve manter-se prontamente acessível e funcional.
Avviso! Poiché il cavo di alimentazione viene usato come dispositivo di
sconnessione, deve rimane prontamente accessibile e operabile.
Warning! Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from the
device.
Avertissement! Protégez le cordon d'alimentation pour que l'on ne marche
pas dessus ou qu'on le pince, en particulier au niveau des prises mâles, des
réceptacles de convenance, et à l'endroit où il sort de l'appareil.
Warnung! Vermeiden Sie, dass auf das Netzkabel getreten oder das Kabel
geknickt wird, insbesondere an den Steckern, den Steckdosen und am
Kabelausgang am Gerät.
¡Advertencia! Proteja el cable de energía para que no se le pise ni apriete, en
especial cerca del enchufe, los receptáculos de conveniencia y el punto del
que salen del equipo.
Aviso! Proteja o cabo de alimentação de ser pisado ou de ser comprimido
particularmente nas chas, em tomadas de parede de conveniência e no
ponto de onde sai do dispositivo.
Avviso! Proteggere il cavo di alimentazione in modo che nessuno ci cammini
sopra e che non venga schiacciato soprattutto in corrispondenza delle spine e
del punto in cui esce dal dispositivo.
Warning! Unplug this device during lightning storms or when unused for long
periods of time.
Avertissement! Débranchez cet appareil pendant les orages avec éclairsou s'il
est inutilisé pendant de longues périodes.
Warnung! Das Gerät ist bei Gewitterstürmen oder wenn es über lange Zeiträume
ungenutzt bleibt vom Netz zu trennen.
¡Advertencia! Desenchufe este dispositivo durante tormentas eléctricas o
cuando no se lo utilice por largos periodos del tiempo.
Aviso! Desconecte este dispositivo da tomada durante trovoadas ou quando não
é utilizado durante longos períodos de tempo.
Avviso! Utilizzare soltanto i collegamenti e gli accessori specicati e/o venduti
dal produttore, quali il treppiedi e l'esoscheletro.
12GM Mini-Converter v1.4 30 www.aja.com
Warning! Do not open the chassis. There are no user-serviceable parts inside.
Opening the chassis will void the warranty unless performed by an AJA service
center or licensed facility.
Avertissement! Ne pas ouvrir le châssis. Aucun élément à l’intérieur du châssis
ne peut être réparé par l’utilisateur. La garantie sera annulée si le châssis est
ouvert par toute autre personne qu’un technicien d’un centre de service ou
d’un établissement agréé AJA.
Warnung! Önen Sie das Gehäuse nicht. Keine der Geräteteile können vom
Benutzer gewartet werden. Durch das Önen des Gehäuses wird die Garantie
hinfällig, es sei denn, solche Wartungsarbeiten werden in einem AJA-ServiceCenter oder einem lizenzierten Betrieb vorgenommen.
¡Advertencia! No abra el chasis. El interior no contiene piezas reparables por
el usuario. El abrir el chasis anulará la garantía a menos que se lo haga en un
centro de servicio AJA o en un local autorizado.
Advertência! Não abra o chassi. Não há internamente nenhuma peça que
permita manutenção pelo usuário. Abrir o chassi anula a garantia, a menos
que a abertura seja realizada por uma central de serviços da AJA ou por um
local autorizado.
Avvertenza! Non aprire lo chassis. All’interno non ci sono parti riparabili
dall’utente. L’apertura dello chassis invaliderà la garanzia se non viene
eettuata da un centro uciale o autorizzato AJA.
Warning! Disconnect the external AC power supply line cord(s) from the mains
power before moving the unit.
Avertissement! Retirez le ou les cordons d’alimentation en CA de la source
d’alimentation principale lorsque vous déplacez l’appareil.
Warnung! Trennen Sie die Wechselstrom-Versorgungskabel vom Netzstrom,
bevor Sie das Gerät verschieben.
¡Advertencia! Cuando mueva la unidad desenchufe de la red eléctrica el/los
cable(s) de la fuente de alimentación CA tipo brick.
Advertência! Remova os cabos CA de alimentação brick da rede elétrica ao
mover a unidade.
Avvertenza! Scollegare il cavo dell’alimentatore quando si sposta l’unità.
12GM Mini-Converter v1.4 31 www.aja.com
Warning! Refer all servicing to qualied service personnel. Servicing is required
when the device has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the device,
the device has been exposed to rain or moisture, does not operate normally,
or has been dropped.
Avertissement ! Référez-vous au personnel de service qualié pour tout
entretien. L'entretien est exigé quand l'appareil a été endommagé de quelque
manière que ce soit, par exemple lorsque le cordon d'alimentation ou la prise
sont endommagés, que du liquide a été versé ou des objets sont tombés dans
l'appareil, que l'appareil a été exposé à la pluie ou à l'humidité, ne fonctionne
pas normalement ou est tombé.
Warnung! Das Gerät sollte nur von qualizierten Fachkräften gewartet werden.
Eine Wartung ist fällig, wenn das Gerät in irgendeiner Weise beschädigt wurde,
wie bei beschädigtem Netzkabel oder Netzstecker, falls Flüssigkeiten oder
Objekte in das Gerät gelangen, das Gerät Regen oder Feuchtigkeit ausgesetzt
wurde, nicht ordnungsgemäß funktioniert oder fallen gelassen wurde.
¡Advertencia! Consulte al personal calicado por cuestiones de reparación. El
servicio de reparación se requiere cuando el dispositivo ha recibido cualquier
tipo de daño, por ejemplo cable o espigas dañadas, se ha derramado líquido o
se han caído objetos dentro del dispositivo, el dispositivo ha sido expuesto a la
lluvia o humedad, o no funciona de modo normal, o se ha caído.
Aviso! Remeta todos os serviços de manutenção para o pessoal de assistência
qualicado. A prestação de serviços de manutenção é exigida quando o
dispositivo foi danicado mediante qualquer forma, como um cabo de
alimentação ou cha que se encontra danicado/a, quando foi derramado
líquido ou caíram objectos sobre o dispositivo, quando o dispositivo foi
exposto à chuva ou à humidade, quando não funciona normalmente ou
quando foi deixado cair.
Avviso! Fare riferimento al personale qualicato per tutti gli interventi di
assistenza. L'assistenza è necessaria quando il dispositivo è stato danneggiato
in qualche modo, ad esempio se il cavo di alimentazione o la spina sono
danneggiati, è stato rovesciato del liquido è stato rovesciato o qualche
oggetto è caduto nel dispositivo, il dispositivo è stato esposto a pioggia o
umidità, non funziona correttamente o è caduto.
Warning! Only use attachments and accessories specied and/or sold by the
manufacturer.
Avertissement! Utilisez seulement les attaches et accessoires spéciés et/ou
vendus par le fabricant.
Warnung! Verwenden Sie nur Zusatzgeräte und Zubehör angegeben und / oder
verkauft wurde durch den Hersteller.
¡Advertencia! Utilice solamente los accesorios y conexiones especicados y/o
vendidos por el fabricante.
Aviso! Utilize apenas equipamentos/acessórios especicados e/ou vendidos pelo
fabricante.
Avviso! Utilizzare soltanto i collegamenti e gli accessori specicati e/o venduti
dal produttore.
12GM Mini-Converter v1.4 32 www.aja.com
Five Year Warranty
AJA VIDEO SYSTEMS, INC.
Limited Warranty on Hardware
AJA Video Systems, Inc. (AJA Video) warrants that the hardware product, not
including storage modules or software components, will be free from defects in
materials and workmanship for a period of five (5) years from the date of purchase.
AJA Video warrants that the storage modules provided as part of the hardware
product will be free from defects in materials and workmanship for a period of one
year from the date of purchase. AJA Video provides a separate software warranty as
part of the license agreement applicable to software components.
If a hardware product or storage module (hereafter, a “product”) proves to be
defective during the applicable warranty period, AJA Video, at its option, will either
repair the defective product without charge for parts and labor, or will provide a
replacement in exchange for the defective product.
To obtain service under this warranty, the Customer must notify AJA Video of the
defect before expiration of the warranty period and make suitable arrangements for
the performance of service by contacting AJA Video support through the channels
set forth on the support contacts web page at http://www.aja.com/support. Except
as stated, the Customer shall bear all shipping, packing, insurance and other costs,
excluding parts and labor, to effectuate repair. Customer shall pack and ship the
defective product to a service center designated by AJA Video, with shipping charges
prepaid. AJA Video shall pay to return the product to Customer but only if to a
location within the country in which the AJA Video service center is located.
This warranty shall not apply to any defect, failure or damage caused by negligent,
inadequate or improper use, handling or maintenance. Without limiting the
foregoing, AJA Video shall not be obligated to furnish service under this warranty
or repair any damage or malfunction a) resulting from attempts by personnel other
than AJA Video representatives to install, repair or service the product, b) resulting
from improper use or connection to incompatible equipment, c) caused by the use
of non-AJA Video parts or supplies, d) if the product has been modified or integrated
with other products when the effect of such a modification or integration increases
the time or difficulty of servicing the product, or e) resulting from being dropped
or otherwise subjected to undue force, exposure to moisture or other corrosive or
conductive substances, exposure to strong magnetic fields, use with improperly
regulated power supplies, exposure to electric shock, use in temperatures outside the
specified operating range, or otherwise failing to treat the product in accordance with
the standard of care appropriate to sensitive and delicate electronic equipment.
EXCEPT AS STATED ABOVE, AJA VIDEO AND ITS VENDORS DISCLAIM IN THEIR
ENTIRETY ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. AJA VIDEO’S RESPONSIBILITY TO REPAIR OR REPLACE TIMELY REPORTED
DEFECTIVE PRODUCTS IS THE WHOLE AND EXCLUSIVE REMEDY CUSTOMER IS
PROVIDED WITH RESPECT TO HARDWARE PRODUCTS AND THEIR STORAGE MODULES.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR
LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO SOME OR ALL
OF THE TERMS OF THIS PARAGRAPH MAY NOT APPLY TO YOU.
THE PRODUCT IS NOT INTENDED, STATED, OR WARRANTED TO OPERATE
UNINTERRUPTED OR ERROR-FREE. YOU UNDERSTAND AND ACKNOWLEDGE THAT THE
PRODUCT IS NOT INTENDED TO BE USED AS THE SOLE OR PRIMARY DATA SOURCE OR
TARGET FOR CRITICAL DATA, AND THAT IT IS YOUR RESPONSIBILITY TO IMPLEMENT
REDUNDANT CAPTURE AND BACKUP SYSTEMS AS APPROPRIATE.
Limitation of Liability
Under no circumstances shall AJA video BE LIABLE IN ANY WAY FOR ANY LOST,
CORRUPTED OR DESTROYED DATA, FOOTAGE OR WORK, OR FOR ANY OTHER
12GM Mini-Converter v1.4 33 www.aja.com
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST PROFITS,
OR FOR ANY THIRD PARTY CLAIM, IN CONNECTION WITH THE PRODUCT, WHETHER
RESULTING FROM DEFECTS IN THE PRODUCT, SOFTWARE OR HARDWARE FAILURE,
OR ANY OTHER CAUSE WHATSOEVER, EVEN IF AJA VIDEO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. AJA VIDEO’S LIABILITY IN CONNECTION WITH THE
PRODUCT SHALL UNDER NO CIRCUMSTANCES EXCEED THE PURCHASE PRICE PAID
FOR THE PRODUCT. The foregoing limitations apply even if any remedy set forth in
this LIMITED WARRANTY fails of its essential purpose. SOME JURISDICTIONS DO NOT
ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO SOME OR ALL OF THE TERMS OF THIS PARAGRAPH
MAY NOT APPLY TO YOU.
Governing Law and Language; Your Rights.
This limited warranty is the only warranty provided by AJA Video on the hardware
product. It supersedes all prior or contemporaneous understandings regarding such
subject matter. No amendment to or modification of this warranty will be binding
unless in writing and signed by AJA Video. The laws of the State of California, USA
will govern this warranty and any dispute arising from it. Any translation of this
Agreement is intended for convenience and to meet local requirements and in the
event of a dispute between the English and any non-English versions, the English
version of this warranty will govern. This limited warranty gives you specific legal
rights and you may have other rights that vary from jurisdiction to jurisdiction, some
of which are noted above.
12GM Mini-Converter v1.4 34 www.aja.com
Loading...