• This Service Manual is the “Revision Publishing” and replaces “Simple
Manual” (S/M Code No. 09-005-431-9T1).
• This Service Manual does not include “ADJUSTMENT”. This item will be
issued in the next Supplement.
S/M Code No. 09-007-431-9R1
REVISION
DATA
SPECIFICATIONS
Tuner SystemFrequency synthesized tuner
TV SystemNTSC-M
Channel CoverageVHF: 2 to 13
Program Memory181
Antenna Input75 ohms, unbalanced
Picture Tube24 in.
Screen Size478 (W) x 359 (H) mm
Video Input1 Vp-p 75 ohms
Audio Input0.5 Vrms., more than 33 k ohms
Speaker120 x 60 mm (43/4 x 23/8 in.)
Operating Voltage120 V AC, 60 Hz
Power Consumption125 W
Phones JackStereo-mini jack
Operating Temperature5 °C – 40 °C
Operating Humidity35 % – 80 %
Dimensions690 (W) x 506 (H) x 485 (D) mm
Weight33.7 kg (74.14 lbs.)
• Design and specifications are subject to change without
notice.
UHF: 14 to 69
CATV: 5A, A-1 to A-5, A to W,
W+1 to W+84
To make the best use of this equipment, make sure to
obey the following items when repairing (or mending).
1. Do not damage or melt the tunicate of the leading
wire on the AC1 side, including the power supply
cord.
2. Do not soil or stain the letters on the spec.
inscription plates, notice labels, fuse labels, etc.
3. When repairing the part extracted from the
conducted side of the board pattern, fix it firmly
with applying bond to the pattern and the part.
4. Restore the following items after repairing.
1) Conditions of soldering of the wires (especially,
the distance on the AC1 side).
2) Conditions of wiring, bundling of wires, etc.
3) Types of the wries.
4) Attachment conditions of all types of the insulation.
5. After repairing, always measure the insulation
resistance and perform the voltage-withstand test
(See Fig-1).
1) The insulation resistance must be 1 MΩ
when applying
2) In the voltage withstand test, apply 1 kV for 1
minute and check that the GO lamp lights.
*Breaking current set to 10 mA.
*Connect the safety checker as shown in Fig-1,
then measure the resistance and perform the test.
* Do not touch the equipment during testing.
*For details of the safety checker, refer to the supplied
Connect the earth cable
to the outside metal part
terminal.
When servicing and checking on the TV, note the followings.
1. Keep the notices.
As for the places which need special attentions, they
are indicated with labels or seals on the cabinet,
chassis and parts. Make sure to keep the indications
and notices in the operation manual.
2. Avoid an electric shock.
There is a high voltage part inside. Avoid an electric
shock while the electric current is flowing.
3. Use the designated parts.
The parts in this equipment have the specific
characteristics of incombustibility and withstand voltage
for safety.
Therefore, use a part which has the same character
as the replaced part. Especially as to the important
parts for safety which is indicated in the circuit
diagram or the table of parts with a mark, the
designated parts must be used.
4. Put parts and wires in the original position after
assembling or wiring.
There are parts which use the insulation material such
as a tube or tape for safety, or which are assembled so
that these parts do not make contact with the printed
!
Safety Components Symbol
!
board. The inside wiring is designed not to get close to
the pyrogenic parts and high voltage parts. Therefore,
put these parts in the original positions.
5. Take care of the cathode-ray tube.
By setting an explosion-proof cathode-ray tube in this
equipment, safety is secured against implosion.
However, when removing it or servicing from the
back, it gives out shock that is dangerous. Take
enough care to deal with it.
6. Avoid an X-ray.
Safety is secured against an X-ray by giving
considerations to the cathode-ray tube and the high
voltage peripheral circuit, etc. Therefore, when
repairing the high voltage peripheral circuit, use the
designated parts and do not change the circuit.
Repairing, except indicates, causes rising of high
voltage, and the cathode-ray tube emits an X-ray.
7. Perform a safety check after servicing.
Confirm that the screws, parts and wiring which were
removed in order to service are put in the original
positions, or whether there are deteriorated portions
around the places serviced.
This symbol is given to important parts which serve to maintain the safety of the product, and which
are made to confirm to special Safety Specifications.
Therefore, when replacing a component with this symbol make absolutely sure that you use a
designated part.
– 3 –
Anode cap
CRT GND
Hook
CRT
CRT GND
Grip
DISASSEMBLY INSTRUCTIONS
1. REAR CABINET REMOVAL
(1) Remove four screws 1 , and three screws 2 , then
remove the rear cabinet in the direction of the arrow.
(See Figure1-1)
2. HIGH-VOLTAGE CAP (ANODE CAP) REMOVAL
2-1. Cautions before Removing
Front cabinet
1
Rear
cabinet
1
1
2
2
1
2
Figure 1-1
Discharge the anode voltage
(1) The anode voltage is not discharged completely from the
CRT of this unit even after the power is turned off. Be
sure to discharge the residual anode voltage before
removing the anode cap.
Do not use pliers
(2) Do not use pliers, etc. to remove the anode cap. If you
used pliers and bent the hook to remove the cap, the spring
characteristics of the hook could be lost, and when
reinstalled, the cap would come off from the CRT anode
button easily, causing an accident.
Do not turn the anode cap
(3) If the anode cap is turned in the direction of its
circumference, the hook is likely to come off.
2-2. Anode Cap Removal
Discharge the anode voltage. (See Figure 2-1)
(1) Connect a flat-bladed screwdriver to the CRT GND via
an alligator clip.
(2) Use a tester to check the end of the screwdriver and ground
of the TV for continuity.
(3) Touch the hook with the end of the screwdriver.
Caution : Be careful not to damage the anode cap.
(4) Turn over the anode cap.
Caution : Be careful not to damage the anode cap.
CRT
Figure 2-1
Anode cap
Anode button
Hook
Figure 2-2
– 4 –
(5) Push the anode cap with your thumb in the direction of
CRT
CRT
Anode cap
Hook
Hook
arrow 1 as shown in the figure, then lift the cap in the
direction of arrow 2 to release the hook on one side.
(See Figure 2-3)
Figure 2-3
(6) Turn over the anode cap on the side where the hook was
released and pull out the cap in the direction opposite to
that on which the cap was pushed. (See Figure 2-4)
Caution : Do not pull out the anode cap straight up.
: Do not pull the cap forcibly. After removing
the cap, check that the hook is not deformed.
3. ANODE CAP REINSTALLTION
Observe the cautions carefully so that no accident occurs
due to a defect in installing the anode cap and so it does
not come off.
3-1. Caution before Reinstalling
Never turn the anode cap after installing it
Never re-use the hook when it has been deformed
Left
Anode cap
CRT
Anode button
Hook
Figure 2-4
Anode cap
Right
(1) If the anode cap is turned after it is installed, it may come
off. Therefore, arrange the high-voltage cable before
attaching the anode cap. (See Figure 3-1)
(2) If you have attached the anode cap before arranging the
high-voltage cable, arrange the cable carefully so the cap
does not turn.
3-2. Anode cap reinstallation
(1) Use a clean cloth moistened slightly with alcohol to clean
the installation section. (See Figure 3-2)
Caution : Check that the installation section is free from
dust, foreign matter, etc.
(2) Coat the anode cap installation circumference with an
appropriate amount of the specified silicone grease (KS650N).
Caution : Be careful that silicone grease does not enter
the anode button.
Figure 3-1
Anode button
Installation
section
Figure 3-2
– 5 –
(3) Eliminate twisting, etc. of the high-voltage cable and
arrange it so that no twisting occurs. (See Figure 3-3)
Caution : If the cable is not arranged correctly, the anode
cap could turn and cause an installation defect.
(4) Turn over the rubber cap symmetrically on the left and
right. (See Figure 3-4)
Caution : Take great care not to damage the anode cap.
High-voltage cable
Anode cap
Figure 3-3
(5) Fit your forefinger over the projection at the center of the
cap and hold the cap between your thumb and middle
finger. (See Figure 3-5)
Figure 3-4
Figure 3-5
– 6 –
(6) Apply the hook on one side to the anode button as shown
on the figure. (See Figure 3-6)
Caution : Check that the hook is held securely.
(7) Apply the hook on the other side to the anode button as
shown in Figure 3-7.
Anode button
Hook
Hook
Anode button
30°
Anode button
Hook
Figure 3-7
(8) Pull the anode cap slightly with the rubber cap turned
over and visually check that the hook is engaged securely.
(9) Release your hand from the rubber cap of the anode cap.
Caution : Cover the anode cap so that it does not lift.
(10) Hold the skirt of the andoe cap slightly to improve the
close contact between the cap and CRT.
(11) Check that the anode cap is in close contact with the CRT.
(See Figure 3-8)
Figure 3-6
Anode button
– 7 –
Skirt
Figure 3-8
4. NK C.B REMOVAL
(1) Disconnect CN903 (CRT GND).
(2) Disconnect CN901, CN902, CN951, CN952.
(3) Remove the NK C.B in the direction of arrow 1 .
(See Figure 4-1)
CN882
(Power cord)
5. MAIN C.B REMOVAL
(1) Remove connector (CN404).
(2) Remove connector (CN882).
(3) Remove connector (CN807).
(4) Pull out the MAIN C.B in the direction of the arrow 2
8Z-JBH-606-010 VRIS,TNR15G271K
87-A40-553-080 DIODE,1N4003 LES
87-017-650-080 DIODE,1SS119
87-A40-503-080 ZENER,MTZJ39B
REF. NO.DESCRIPTIONPART NO.KANRI
MAIN C.B
C001 87-010-405-080 CAP,E 10-50 M 11L SME
C002 87-018-209-080 CAP,TC U 0.1-50 Z F UP050
C003 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C004 87-018-127-080 CAP,TC U 470P-50 K B UP050
C005 87-010-401-080 CAP,E 1-50 M 11L SME
C006 87-018-209-080 CAP,TC U 0.1-50 Z F UP050
C007 87-010-248-080 CAP,E 220-10 M 11L SME
C008 87-018-123-080 CAP,TC U 220P-50 K B UP050
C009 87-010-401-080 CAP,E 1-50 M 11L SME
C010 87-018-131-080 CAP,TC U 1000P-50 K B UP050
C011 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C012 87-018-119-080 CAP,TC U 100P-50 K B UP050
C013 87-018-119-080 CAP,TC U 100P-50 K B UP050
C014 87-010-263-080 CAP,E 100-10 M 11L SME
C015 87-018-119-080 CAP,TC U 100P-50 K B UP050
C016 87-018-131-080 CAP,TC U 1000P-50 K B UP050
C017 87-018-128-080 CAP,TC U 560P-50 K B UP050
C018 87-018-109-080 CAP,TC U 22P-50 J SL UP050
C019 87-018-109-080 CAP,TC U 22P-50 J SL UP050
C020 87-018-119-080 CAP,TC U 100P-50 K B UP050
C021 87-018-109-080 CAP,TC U 22P-50 J SL UP050
C022 87-018-109-080 CAP,TC U 22P-50 J SL UP050
C023 87-018-123-080 CAP,TC U 220P-50 K B UP050
C024 87-018-209-080 CAP,TC U 0.1-50 Z F UP050
C025 87-018-119-080 CAP,TC U 100P-50 K B UP050
C101 87-010-404-080 CAP,E 4.7-50 M 11L SME
C104 87-010-248-080 CAP,E 220-10 M 11L SME
C105 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C106 87-A10-207-080 CAP,TC U 0.01-50 K B UP050
C112 87-018-109-080 CAP,TC U 22P-50 J SL UP050
C113 87-018-109-080 CAP,TC U 22P-50 J SL UP050
C201 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C202 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C203 87-010-400-080 CAP,E 0.47-50 M 11L SME
C204 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C205 87-010-237-080 CAP,E 1000-16 M SME
C206 87-A10-287-080 CAP,M 2200P-50 J
C207 87-010-400-080 CAP,E 0.47-50 M 11L SME
C208 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C209 87-010-385-080 CAP,E 220-25 M SME
C210 87-A11-080-080 CAP,TC U 47P-50 J CH
C211 87-A11-080-080 CAP,TC U 47P-50 J CH
C212 87-A11-080-080 CAP,TC U 47P-50 J CH
C213 87-A11-082-080 CAP,TC U 56P-50 J CH
C214 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C229 87-018-149-080 CAP,TC U 15P-50 J CH UP050
C301 87-010-403-080 CAP,E 3.3-50 M 11L SME
C302 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C305 87-018-126-080 CAP,TC U 390P-50 K B UP050
C306 87-010-405-080 CAP,E 10-50 M 11L SME
C307 87-A10-299-080 CAP,M 0.022-50 J
C308 87-010-401-080 CAP,E 1-50 M 11L SME
C309 87-018-147-080 CAP,TC U 10P-50 J CH UP050
C311 87-018-209-080 CAP,TC U 0.1-50 Z F UP050
C312 87-018-209-080 CAP,TC U 0.1-50 Z F UP050
C313 87-018-209-080 CAP,TC U 0.1-50 Z F UP050
C314 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C315 87-018-123-080 CAP,TC U 220P-50 K B UP050
C317 87-010-402-080 CAP,E 2.2-50 M 11L SME
C318 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C319 87-010-237-080 CAP,E 1000-16 M SME
C321 87-010-404-080 CAP,E 4.7-50 M 11L SME
C322 87-A10-295-080 CAP,M 0.01-50 J
C323 87-016-280-080 CAP,E 3.3-50 M BP SME
C324 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C325 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C326 87-A10-307-080 CAP,M 0.1-50 J
C327 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
KANRI
NO.
– 9 –
REF. NO.DESCRIPTIONPART NO.
NO.
C328 87-010-405-080 CAP,E 10-50 M 11L SME
C329 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C330 87-010-401-080 CAP,E 1-50 M 11L SME
C331 87-010-544-080 CAP,E 0.1-50 M 11L SME
C332 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C333 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C334 87-018-209-080 CAP,TC U 0.1-50 Z F UP050
C335 87-015-997-010 CAP,E 2200-16 M SME
C336 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C337 87-018-130-080 CAP,TC U 820P-50 K B UP050
C338 87-010-405-080 CAP,E 10-50 M 11L SME
C339 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C340 87-018-118-080 CAP,TC U 82P-50 J B UP050
C341 87-018-118-080 CAP,TC U 82P-50 J B UP050
C342 87-018-150-080 CAP,TC U 18P-50 J CH UP050
C343 87-A10-307-080 CAP,M 0.1-50 J
C344 87-A10-307-080 CAP,M 0.1-50 J
C501 87-010-405-080 CAP,E 10-50 M 11L SME
C504 87-010-393-080 CAP,E 100-35 M SME
C505 87-018-131-080 CAP,TC U 1000P-50 K B UP050
C508 87-010-398-090 CAP,E 2200-35 M SME
C509 87-A11-245-080 CAP,M/P 0.1-100 J TF-ECQV
C510 87-010-405-080 CAP,E 10-50 M 11L SME
C605 87-A10-972-090 CAP,M/P 0.015-1.25K H DKRG
C607 87-A12-351-090 CAP,M/P 0.013-800 H DKRG
C608 87-A10-833-010 CAP,CER 1000P-2K K R LONG
C609 87-A10-975-090 CAP,M/P 0.68-250 J
C610 87-A10-833-010 CAP,CER 1000P-2K K R LONG
C611 87-010-963-080 CAP,E 2.2-160 M 11L SME
C612 87-010-976-080 CAP,CER 1000P-500 K B DD10
C613 87-016-373-080 CAP,E 10-250 M SME
C614 87-010-976-080 CAP,CER 1000P-500 K B DD10
C615 87-A10-843-080 CAP,CER 680P-1K K R
C616 87-A10-843-080 CAP,CER 680P-1K K R
C617 87-A12-082-090 CAP,E 1000-35 SMG
C618 87-A10-301-080 CAP,M 0.033-50 J
C619 87-A11-987-080 CAP,CER 6800P-250 K R HR
C620 87-010-395-080 CAP,E 330-35 M SME
C621 87-018-131-080 CAP,TC U 1000P-50 K B UP050
C622 87-A11-124-080 CAP,TC U 2200P-50 K B
C623 87-A12-171-080 CAP,E 4.7-50 K SH
C624 87-010-975-080 CAP,CER 330P-500 K B DD10
C626 87-010-405-080 CAP,E 10-50 M 11L SME
C627 87-010-975-080 CAP,CER 330P-500 K B DD10
C629 87-A10-469-080 CAP,CER 2200P-500 K B DD10
C630 87-010-405-080 CAP,E 10-50 M 11L SME
C631 87-010-263-080 CAP,E 100-10 M 11L SME
C655 87-A11-354-090 CAP,E 100-160 M SMG
C714 87-010-221-080 CAP,E 470-10 M SME
C720 87-015-464-080 CAP,E 4.7-16 BP
C721 87-A10-292-080 CAP,M 5600P-50 J
C722 87-A10-296-080 CAP,M 0.012-50 J
C723 87-010-401-080 CAP,E 1-50 M 11L SME
C724 87-010-404-080 CAP,E 4.7-50 M 11L SME
C725 87-010-405-080 CAP,E 10-50 M 11L SME
C726 87-010-404-080 CAP,E 4.7-50 M 11L SME
C727 87-010-112-080 CAP,E 100-16 M 11L SME
C728 87-015-464-080 CAP,E 4.7-16 BP
C729 87-010-404-080 CAP,E 4.7-50 M 11L SME
C730 87-015-464-080 CAP,E 4.7-16 BP
C731 87-A10-288-080 CAP,M 2700P-50 J
C733 87-016-301-080 CAP,TN 3.3-16 K DN
C734 87-015-464-080 CAP,E 4.7-16 BP
C735 87-016-302-080 CAP,TN 10-16 K DN
C736 87-010-401-080 CAP,E 1-50 M 11L SME
C737 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C802 87-018-131-080 CAP,TC U 1000P-50 K B UP050
C804 87-A11-308-090 CAP,M/P 0.033-630 J ECQF6(ZH)
C805 87-A10-846-080 CAP,CER 3300P-1K K R
C806 87-A12-298-090 CAP,E 820-200 M 25B SMH
REF. NO.DESCRIPTIONPART NO.KANRI
KANRI
NO.
C807 87-A10-568-010 CAP,PP 1000P-630 J APH
C808 87-010-384-080 CAP,E 100-25 M 11L SME
C809 87-018-131-080 CAP,TC U 1000P-50 K B UP050
C810 87-018-129-080 CAP,TC U 680P-50 K B UP050
C811 87-018-131-080 CAP,TC U 1000P-50 K B UP050
C813 87-018-131-080 CAP,TC U 1000P-50 K B UP050
C814 87-010-260-080 CAP,E 47-25 M 11L SME
C815 87-010-260-080 CAP,E 47-25 M 11L SME
C816 87-010-405-080 CAP,E 10-50 M 11L SME
C817 87-010-398-090 CAP,E 2200-35 M SME
C818 87-018-209-080 CAP,TC U 0.1-50 Z F UP050
C820 87-010-405-080 CAP,E 10-50 M 11L SME
C821 87-010-405-080 CAP,E 10-50 M 11L SME
C822 87-018-209-080 CAP,TC U 0.1-50 Z F UP050
C824 87-010-237-080 CAP,E 1000-16 M SME
C826 87-010-976-080 CAP,CER 1000P-500 K B DD10
C829 87-010-384-080 CAP,E 100-25 M 11L SME
C831 87-010-405-080 CAP,E 10-50 M 11L SME
C834 87-A10-733-090 CAP,E 220-160 M SK
C835 87-A10-833-010 CAP,CER 1000P-2K K R LONG
C838 87-010-397-010 CAP,E 1000-35 M SME
!
C842 87-012-370-010 CAP,CER 3300P-250 M E ECKD
!
C843 87-012-370-010 CAP,CER 3300P-250 M E ECKD
!
C844 87-012-370-010 CAP,CER 3300P-250 M E ECKD
!
C845 87-012-370-010 CAP,CER 3300P-250 M E ECKD
C846 87-A10-207-080 CAP,TC U 0.01-50 K B UP050
CF201 84-LB3-626-080 FLTR,TPS4.5MB2
CF202 84-LB3-627-080 FLTR,SFSH 4.5MDB SIF
CN001 87-009-195-010 CONN,5P V WHT EH
CN601 87-099-762-010 CONN,5P V TBL-P BOSS
CN701 87-A60-628-010 CONN,11P V 2MM JMT
CN705 87-009-262-010 CONN,8P V 52147
CN706 87-099-186-010 CONN,6P V WHT EH
CN707 87-A61-126-080 MALE, 1P TP42097
C401 87-010-404-080 CAP,E 4.7-50 M 11L SME
C402 87-A10-295-080 CAP,M 0.01-50 J
C403 87-A10-295-080 CAP,M 0.01-50 J
C404 87-A10-307-080 CAP,M 0.1-50 J
C405 87-010-404-080 CAP,E 4.7-50 M 11L SME
C406 87-010-260-080 CAP,E 47-25 M 11L SME
C407 87-010-197-080 C-CAP,S 0.01-25 K B C2012
REF. NO.DESCRIPTIONPART NO.KANRI
KANRI
NO.
C408 87-010-405-080 CAP,E 10-50 M 11L SME
C409 87-010-404-080 CAP,E 4.7-50 M 11L SME
C410 87-010-404-080 CAP,E 4.7-50 M 11L SME
C411 87-010-404-080 CAP,E 4.7-50 M 11L SME
C413 87-A10-295-080 CAP,M 0.01-50 J
C414 87-A10-305-080 CAP,M 0.068-50 J
C415 87-A10-293-080 CAP,M 6800P-50 J
C416 87-010-260-080 CAP,E 47-25 M 11L SME
C417 87-010-404-080 CAP,E 4.7-50 M 11L SME
C418 87-010-197-080 C-CAP,S 0.01-25 K B C2012
C419 87-010-404-080 CAP,E 4.7-50 M 11L SME
C420 87-010-404-080 CAP,E 4.7-50 M 11L SME
C421 87-010-404-080 CAP,E 4.7-50 M 11L SME
C422 87-A10-293-080 CAP,M 6800P-50 J
C424 87-010-260-080 CAP,E 47-25 M 11L SME
C425 87-A10-305-080 CAP,M 0.068-50 J
C426 87-A10-295-080 CAP,M 0.01-50 J
C427 87-010-404-080 CAP,E 4.7-50 M 11L SME
C428 87-010-189-080 C-CAP,S 8200P-50 K B
C429 87-012-365-080 C-CAP,S 0.027-25 K B
C430 87-010-401-080 CAP,E 1-50 M 11L SME
C431 87-010-189-080 C-CAP,S 8200P-50 K B
C432 87-010-197-080 C-CAP,S 0.01-25 K B C2012
C433 87-010-260-080 CAP,E 47-25 M 11L SME
C434 87-012-365-080 C-CAP,S 0.027-25 K B
C435 87-010-401-080 CAP,E 1-50 M 11L SME
C436 87-010-401-080 CAP,E 1-50 M 11L SME
C437 87-010-401-080 CAP,E 1-50 M 11L SME
C438 87-010-178-080 C-CAP,S 1000P-50 K B C2012
C439 87-A10-307-080 CAP,M 0.1-50 J
C440 87-A10-307-080 CAP,M 0.1-50 J
C441 87-A10-307-080 CAP,M 0.1-50 J
C442 87-010-401-080 CAP,E 1-50 M 11L SME
C443 87-010-405-080 CAP,E 10-50 M 11L SME
C444 87-010-405-080 CAP,E 10-50 M 11L SME
C445 87-010-405-080 CAP,E 10-50 M 11L SME
C446 87-010-405-080 CAP,E 10-50 M 11L SME
C447 87-010-405-080 CAP,E 10-50 M 11L SME
C448 87-010-197-080 C-CAP,S 0.01-25 K B C2012
C449 87-010-402-080 CAP,E 2.2-50 M 11L SME
C450 87-010-247-080 CAP,E 100-50 M SME
C451 87-010-388-080 CAP,E 1000-25 M SME
C452 87-010-388-080 CAP,E 1000-25 M SME
C453 87-010-178-080 C-CAP,S 1000P-50 K B C2012
C454 87-010-399-090 CAP,E 3300-35 M SME
C455 87-010-393-080 CAP,E 100-35 M SME
C460 87-010-197-080 C-CAP,S 0.01-25 K B C2012
C464 87-010-260-080 CAP,E 47-25 M 11L SME
C465 87-010-178-080 C-CAP,S 1000P-50 K B C2012
C466 87-A10-295-080 CAP,M 0.01-50 J
C482 87-010-196-080 C-CAP,S 0.1-25 Z F C2012
C483 87-010-260-080 CAP,E 47-25 M 11L SME
C484 87-010-197-080 C-CAP,S 0.01-25 K B C2012
C486 87-010-197-080 C-CAP,S 0.01-25 K B C2012
C487 87-010-196-080 C-CAP,S 0.1-25 Z F C2012
– 11 –
REF. NO.DESCRIPTIONPART NO.
NO.
C488 87-010-384-080 CAP,E 100-25 M 11L SME
C489 87-010-197-080 C-CAP,S 0.01-25 K B C2012
C492 87-010-197-080 C-CAP,S 0.01-25 K B C2012
C493 87-A10-307-080 CAP,M 0.1-50 J
C494 87-A10-307-080 CAP,M 0.1-50 J
C495 87-010-400-080 CAP,E 0.47-50 M 11L SME
C496 87-010-400-080 CAP,E 0.47-50 M 11L SME
C497 87-010-405-080 CAP,E 10-50 M 11L SME
C751 87-010-545-080 CAP,E 0.22-50 M 11L SME
C752 87-010-402-080 CAP,E 2.2-50 M 11L SME
C753 87-010-545-080 CAP,E 0.22-50 M 11L SME
C754 87-010-402-080 CAP,E 2.2-50 M 11L SME
C755 87-010-197-080 C-CAP,S 0.01-25 K B C2012
C756 87-010-545-080 CAP,E 0.22-50 M 11L SME
C757 87-010-402-080 CAP,E 2.2-50 M 11L SME
C758 87-010-545-080 CAP,E 0.22-50 M 11L SME
C759 87-010-402-080 CAP,E 2.2-50 M 11L SME
C760 87-010-197-080 C-CAP,S 0.01-25 K B C2012
C761 87-010-314-080 C-CAP,S 22P-50 J CH GRM
C762 87-010-314-080 C-CAP,S 22P-50 J CH GRM
C763 87-010-405-080 CAP,E 10-50 M 11L SME
C764 87-010-401-080 CAP,E 1-50 M 11L SME
C765 87-010-382-080 CAP,E 22-25 M 11L SME
C766 87-010-402-080 CAP,E 2.2-50 M 11L SME
C767 87-010-401-080 CAP,E 1-50 M 11L SME
C768 87-010-402-080 CAP,E 2.2-50 M 11L SME
C769 87-010-405-080 CAP,E 10-50 M 11L SME
C770 87-010-405-080 CAP,E 10-50 M 11L SME
C780 87-010-405-080 CAP,E 10-50 M 11L SME
C781 87-010-405-080 CAP,E 10-50 M 11L SME
CN401 87-009-314-010 CONN,8P V 51048
CN404 8Z-JE5-640-010 CONN ASSY,4P SP-25
CN404 87-049-469-010 CONN,4P V WHT EH
CN405 87-009-317-010 CONN,11P V 51048
CN409 87-009-033-010 CONN,5P V WHT PH
C901 87-010-405-080 CAP,E 10-50 M 11L SME
C902 87-010-968-080 CAP,CER 680P-2K K B
C903 87-010-405-080 CAP,E 10-50 M 11L SME
C906 87-010-400-080 CAP,E 0.47-50 M 11L SME
C907 87-010-235-080 CAP,E 470-16 M SME
C908 87-A11-108-080 CAP,TC U 680P-50 J CH
C909 87-A11-110-080 CAP,TC U 820P-50 J CH
C910 87-A11-108-080 CAP,TC U 680P-50 J CH
C911 87-A11-106-080 CAP,TC U 560P-50 J CH
C912 87-A11-106-080 CAP,TC U 560P-50 J CH
C915 87-010-260-080 CAP,E 47-25 M 11L SME
C916 87-018-134-080 CAP,TC U 0.01-16 N Y UP050
C917 87-010-970-090 CAP,CER 4700P-2K K B DE
C951 87-010-381-080 CAP,E 330-16 M SME
C953 87-018-119-080 CAP,TC U 100P-50 K B UP050
C954 87-010-405-080 CAP,E 10-50 M 11L SME
C955 87-010-405-080 CAP,E 10-50 M 11L SME
C956 87-010-405-080 CAP,E 10-50 M 11L SME
C957 87-018-122-080 CAP,TC U 180P-50 K B UP050
C958 87-018-119-080 CAP,TC U 100P-50 K B UP050
C959 87-A10-050-010 CAP,CER 4700P-500 K
C960 87-010-221-080 CAP,E 470-10 M SME
C961 87-A12-168-080 CAP,E 33-160 M SMG
C962 87-A12-010-080 CAP,M/P 0.047-250 J ECQE2
C963 87-A10-283-080 CAP,M 1000P-50 J
C964 87-A10-283-080 CAP,M 1000P-50 J
C965 87-010-963-080 CAP,E 2.2-160 M 11L SME
C966 87-A12-014-080 CAP,M/P 0.1-250 J ECQE2
C967 87-A10-303-080 CAP,M 0.047-50 J
C968 87-010-221-080 CAP,E 470-10 M SME
CN901 87-009-034-010 CONN,6P V WHT PH
CN902 87-009-195-010 CONN,5P V WHT EH
CN903 87-A61-126-080 MALE, 1P TP42097
CN904 87-A61-060-080 CONN,1P V RED TP00706
CN951 87-009-030-010 CONN,2P V WHT PH