Aiwa BZG-5 Service manual
BZG-5
English
SERVICE MANUAL
CD MECHANISM
TYPE
ZD5GNM
ZD5GNDM
BASIC CD MECHANISM : KSM-213 RSCM
BASIC CD MECHANISM
KSM-213 RSCM
KSM-213 RSCM
S/M Code No. 09-023-353-3NC
DATA
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully the
instructions below when servicing.
WARNING!
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT
WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO
CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE
FROM A DISTANCE OF MORE THAN 30cm FROM THE
SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL
PICK-UP BLOCK.
Caution: Invisible laser radiation when
open and interlocks defeated avoid exposure to beam.
Advarsel:Usynling laserståling ved åbning,
når sikkerhedsafbrydere er ude af funktion.
Undgå udsættelse for stråling.
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyt-täjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING!
Om apparaten används på annat sätt än vad som specificeras i
denna bruksanvising, kan användaren utsättas för osynling
laserstrålning, som överskrider gränsen för laserklass 1.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
ATTENTION
L'utilisation de commandes, réglages ou procédures autres que
ceux spécifiés peut entraîner une dangereuse exposition aux
radiations.
ADVARSEL!
Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude
af funktion. Undgå udsættelse for stråling.
This Compact Disc player is classified as a CLASS 1 LASER
product.
The CLASS 1 LASER PRODUCT label is located on the rear
exterior.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
-2-
Precaution to replace Optical block (KSM-213RSCM)
(KSS-213R)
Body or clothes electrostatic potential could ruin
laser diode in the optical block. Be sure ground
body and workbench, and use care the clothes
do not touch the diode.
1) After the connection, remove solder shown in
the right figure.
Solder
PICK-UP Assy PWB
-3-
How to Adjust the Rotating Phase of the Gear, Main Cam
1) Push down the hooking catch of the CHAS. MECH, and remove
the TRAY.
2) Align the arrow mark of the Gear, Main Cam with the black round
mark of the CHAS, MECHA as shown below.
3) Confirm that the Slide, Mech Cam is located in the right position,
then insert the TRAY gently.
Caution: If the rotating phase of the Gear, Main Cam is
incorrectly adjusted, the chucking operation and tray
movement will have malfunction.
Align the arrow mark with the black
round • mark.
-4-
ELECTRICAL PARTS LIST -1/4 (3CD C.B-1/2)
! = ! SAFTY PARTS
C = Components marked
UNIT-NAME ! C REF-NO PARTS-NO PARTS-NAME SUFFIX&MODEL
CZA-1 CZA-1
ZD5NDM ZD5NM
3CD O C 0001 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0002 87-A12-062-080 CAP,E 100-10 SMG a b
3CD O C 0003 87-A10-915-080 C-CAP,U 1000P-25 J CH a b
3CD O C 0004 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0005 87-A12-062-080 CAP,E 100-10 SMG a b
3CD O C 0006 87-A12-091-080 CAP,E 10-50 SMG a b
3CD O C 0101 87-A10-504-080 C-CAP,U 0.047-16 K B a b
3CD O C 0102 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0103 87-012-188-080 C-CAP,U 47P-50 J CH GRM a b
3CD O C 0104 87-012-282-080 C-CAP,U 4700P-50 K B GRM a b
3CD O C 0105 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0106 87-A12-062-080 CAP,E 100-10 SMG a b
3CD O C 0107 87-A12-062-080 CAP,E 100-10 SMG a b
3CD O C 0108 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0109 87-A12-062-080 CAP,E 100-10 SMG a b
3CD O C 0110 87-A12-091-080 CAP,E 10-50 SMG a b
3CD O C 0111 87-A12-087-080 CAP,E 1-50 SMG a b
3CD O C 0114 87-012-188-080 C-CAP,U 47P-50 J CH GRM a b
3CD O C 0115 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0116 87-A12-062-080 CAP,E 100-10 SMG a b
CZA-1 CZA-1
ZD5NDM ZD5NM
3CD O C 0117 87-A12-062-080 CAP,E 100-10 SMG a b
3CD O C 0118 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0121 87-A12-062-080 CAP,E 100-10 SMG a b
3CD O C 0122 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0123 87-012-176-080 C-CAP,U 15P-50 J CH a b
3CD O C 0124 87-012-176-080 C-CAP,U 15P-50 J CH a b
3CD O C 0125 87-016-083-080 C-CAP,S 0.15-16 K R a b
3CD O C 0126 87-A12-062-080 CAP,E 100-10 SMG a b
3CD O C 0127 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0128 87-A10-504-080 C-CAP,U 0.047-16 K B a b
3CD O C 0129 87-A12-089-080 CAP,E 3.3-50 SMG a b
3CD O C 0130 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0131 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0132 87-A12-062-080 CAP,E 100-10 SMG a b
3CD O C 0133 87-A10-918-080 CAP,E 100-16 SMG a b
3CD O C 0134 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0135 87-A12-071-080 CAP,E 47-25 SMG a b
3CD O C 0136 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD X C 0137 88-108-000-080 C-JUMPER,U a b
3CD O C 0138 87-012-349-080 C-CAP,S 1000P-50 J CH GRM a b
CZA-1 CZA-1
ZD5NDM ZD5NM
3CD O C 0203 87-A12-068-080 CAP,E 470-16 SMG a b
3CD O C 0204 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0205 87-A12-062-080 CAP,E 100-10 SMG a b
3CD O C 0208 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0212 87-A12-091-080 CAP,E 10-50 SMG a b
3CD O C 0213 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0304 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a b
3CD O C 0305 87-012-274-080 C-CAP,U 1000P-50 K B GRM a b
3CD O C 0306 86-ZA1-616-080 C-CAP,U 0.01-50 K B (MUR) a b
3CD O C 0401 87-012-195-080 C-CAP,U 100P-50 J CH GRM a b
3CD O C 0402 87-012-195-080 C-CAP,U 100P-50 J CH GRM a b
3CD O C 0403 87-012-195-080 C-CAP,U 100P-50 J CH GRM a b
3CD O C 0404 87-012-195-080 C-CAP,U 100P-50 J CH GRM a b
3CD O C 0405 87-012-195-080 C-CAP,U 100P-50 J CH GRM a b
3CD O C 0601 87-010-759-080 C-CAP,U 0.1-25 Z F CM/CB a .
3CD O C 0602 87-A12-062-080 CAP,E 100-10 SMG a .
3CD O C 0603 87-012-180-080 C-CAP,U 22P-50 J CH a .
3CD O CN 0001 87-A60-429-010 CONN,16P H TOC-A a b
3CD O CN 0201 84-ZG1-648-010 CONN ASSY,6P a b
3CD O CN 0202 87-A60-062-010 CONN,05P V 9604S-05C a b
CZA-1 CZA-1
ZD5NDM ZD5NM
3CD O CN 0301 87-A60-154-010 CONN,6P H FE a b
3CD O CN 0401 87-099-201-010 CONN,8P H BLK 6216 a b
3CD S D 0101 87-A40-003-080 ZENER,MTZJ4.3A a b
3CD S D 0102 87-020-465-080 DIODE,1SS133 a b
3CD O FB 0601 87-008-372-080 FLTR,EMI BL01 RN1 a .
3CD S IC 0101 87-A22-242-030 C-IC,LC78646E a b
3CD S IC 0201 87-A21-822-010 IC,LA6568 a b
3CD X JR 0104 88-118-000-080 C-JUMPER,S a b
3CD X JR 0201 88-108-000-080 C-JUMPER,U a b
3CD X JR 0202 88-108-000-080 C-JUMPER,U a b
3CD X JR 0203 88-108-000-080 C-JUMPER,U a b
3CD X JR 0204 88-108-000-080 C-JUMPER,U a b
3CD O LED0601 87-A40-558-010 LED,SLZ-8128A-01-A a .
3CD S Q 0001 87-A30-494-080 TR,2SA1980G a b
3CD S Q 0101 87-A30-612-080 TR,2SC5343Y a b
3CD S Q 0601 87-A30-075-080 C-TR,2SA1235F a .
3CD X R 0001 88-108-333-080 C-RES,U 33K-1/16W J a b
3CD O R 0002 88-108-153-080 C-RES,U 15K-1/16W J a b
3CD O R 0003 88-108-153-080 C-RES,U 15K-1/16W J a b
3CD O R 0004 88-108-153-080 C-RES,U 15K-1/16W J a b
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-5-
ELECTRICAL PARTS LIST -2/4 (3CD C.B-2/2)
! = ! SAFTY PARTS
C = Components marked
UNIT-NAME ! C REF-NO PARTS-NO PARTS-NAME SUFFIX&MODEL
CZA-1 CZA-1
ZD5NDM ZD5NM
3CD O R 0005 88-108-153-080 C-RES,U 15K-1/16W J a b
3CD X R 0006 88-108-333-080 C-RES,U 33K-1/16W J a b
3CD X R 0007 88-108-181-080 C-RES,U 180-1/16W J a b
3CD X R 0008 88-108-339-080 C-RES,U 3.3-1/16W J a b
3CD X R 0010 88-100-000-010 PLATING-JW, 0.58 SN95 a b
3CD O R 0101 88-108-103-080 C-RES,U 10K-1/16W J a b
3CD X R 0102 88-108-273-080 C-RES,U 27K-1/16W J a b
3CD X R 0103 88-108-331-080 C-RES,U 330-1/16W J a b
3CD O R 0104 87-012-284-080 C-CAP,U 6800P-50 K B GRM a b
3CD X R 0105 88-108-000-080 C-JUMPER,U a b
3CD O R 0106 87-012-274-080 C-CAP,U 1000P-50 K B GRM a b
3CD X R 0107 88-108-000-080 C-JUMPER,U a b
3CD X R 0108 88-100-000-010 PLATING-JW, 0.58 SN95 a b
3CD O R 0110 88-108-102-080 C-RES,U 1K-1/16W J a b
3CD X R 0111 88-121-470-080 RES,47-1/8W J a b
3CD O R 0112 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0113 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0114 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0115 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0116 88-108-101-080 C-RES,U 100-1/16W J a b
CZA-1 CZA-1
ZD5NDM ZD5NM
3CD O R 0117 88-108-101-080 C-RES,U 100-1/16W J a b
3CD X R 0118 88-108-124-080 C-RES,U 120K-1/16W J a b
3CD X R 0119 88-108-681-080 C-RES,U 680-1/16W J a b
3CD X R 0120 88-108-681-080 C-RES,U 680-1/16W J a b
3CD O R 0121 88-108-123-080 C-RES,U 12K-1/16W J a b
3CD X R 0122 88-108-122-080 C-RES,U 1.2K-1/16W J a b
3CD X R 0123 88-118-221-080 C-RES,S 220-1/10W J a b
3CD X R 0124 88-118-221-080 C-RES,S 220-1/10W J a b
3CD X R 0125 88-118-331-080 C-RES,S 330-1/10W J a b
3CD O R 0126 88-108-101-080 C-RES,U 100-1/16W J a b
3CD X R 0127 88-118-100-080 C-RES,S 10-1/10W J a b
3CD X R 0128 88-100-000-010 PLATING-JW, 0.58 SN95 a b
3CD X R 0129 88-100-000-010 PLATING-JW, 0.58 SN95 a b
3CD X R 0130 88-121-103-080 RES,10K-1/8W J a b
3CD X R 0131 88-128-473-080 C-RES, 47K-1/8W J a b
3CD O R 0134 88-108-102-080 C-RES,U 1K-1/16W J a b
3CD O R 0135 88-108-102-080 C-RES,U 1K-1/16W J a b
3CD O R 0151 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0152 88-108-101-080 C-RES,U 100-1/16W J a b
3CD X R 0203 88-128-473-080 C-RES, 47K-1/8W J a b
CZA-1 CZA-1
ZD5NDM ZD5NM
3CD X R 0209 88-108-472-080 C-RES,U 4.7K-1/16W J a b
3CD X R 0212 88-121-182-080 RES,1.8K-1/8W J a b
3CD X R 0213 88-121-392-080 RES,3.9K-1/8W J a b
3CD X R 0216 88-108-273-080 C-RES,U 27K-1/16W J a b
3CD X R 0219 88-108-273-080 C-RES,U 27K-1/16W J a b
3CD X R 0220 88-121-103-080 RES,10K-1/8W J a b
3CD X R 0221 88-121-822-080 RES,8.2K-1/8W J a b
3CD O R 0222 88-108-562-080 C-RES,U 5.6K-1/16W J a b
3CD O R 0223 88-108-562-080 C-RES,U 5.6K-1/16W J a b
3CD X R 0224 88-108-273-080 C-RES,U 27K-1/16W J a b
3CD X R 0225 88-108-273-080 C-RES,U 27K-1/16W J a b
3CD X R 0226 88-108-000-080 C-JUMPER,U a b
3CD X R 0227 88-108-000-080 C-JUMPER,U a b
3CD X R 0228 88-108-000-080 C-JUMPER,U a b
3CD X R 0229 88-121-820-080 RES,82-1/8W J a b
3CD O R 0401 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0402 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0403 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0404 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0405 88-108-101-080 C-RES,U 100-1/16W J a b
CZA-1 CZA-1
ZD5NDM ZD5NM
3CD O R 0406 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0407 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0408 88-108-101-080 C-RES,U 100-1/16W J a b
3CD O R 0409 88-108-102-080 C-RES,U 1K-1/16W J a b
3CD O R 0410 88-108-102-080 C-RES,U 1K-1/16W J a b
3CD O R 0411 88-108-102-080 C-RES,U 1K-1/16W J a b
3CD O R 0412 88-108-102-080 C-RES,U 1K-1/16W J a b
3CD O R 0413 88-108-102-080 C-RES,U 1K-1/16W J a b
3CD O R 0414 88-108-102-080 C-RES,U 1K-1/16W J a b
3CD X R 0415 88-121-102-080 RES,1K-1/8W J a b
3CD X R 0416 88-121-821-080 RES,820-1/8W J a b
3CD X R 0417 88-118-562-080 C-RES,S 5.6K-1/10W J a b
3CD X R 0601 88-118-271-080 C-RES,S 270-1/10W J a .
3CD X R 0602 88-108-221-080 C-RES,U 220-1/16W J a .
3CD O R 0603 88-108-101-080 C-RES,U 100-1/16W J a .
3CD O S 0401 87-036-109-010 SW,MICRO SPPB61 a b
3CD O S 0402 87-036-109-010 SW,MICRO SPPB61 a b
3CD O X 0101 87-A70-363-010 VIB,XTAL 16.9344MHZ CSA-309 a b
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-6-
ELECTRICAL PARTS LIST -3/4 (T-T C.B-1/1)
! = ! SAFTY PARTS
C = Components marked
UNIT-NAME ! C REF-NO PARTS-NO PARTS-NAME SUFFIX&MODEL
CZA-1 CZA-1
ZD5NDM ZD5NM
TT O C 0401 87-A11-148-080 CAP,TC U 0.1-50 Z F a b
TT O CN 0401 86-NFZ-675-010 CONN,5P H 6216-11H a b
TT O PS 0401 87-A90-156-010 SNSR,SG-240 a b
TT X R 0408 88-121-561-080 RES,560-1/8W J a b
TT X R 0409 88-121-273-080 RES,27K-1/8W J a b
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-7-
Loading...