5GHz Wireless HDMI
WiFi-5G
Wireless HDMI System
User Guide
AITech - 5G HDMI User Guide
1
Introduction
Your Wireless HDMI system is a cable-free plug-and-play solution for
extending any A/V sources utilizing HDMI, such as satellite boxes, digital
video players, and gaming consoles, to remote displays such as
High-Definition digital TVs.
Package Contents
When first unpacking your Wireless HDMI system please check to see if the
following items are included:
WHDMI Transmitter
1
WHDMI Receiver
2
User guide
3
IR Blaster
4
AITech - 5G HDMI User Guide
Power Adapter x 2
5
HDMI Cablex2
6
IR Blaster
7
2
Module View
Transmitter
AITech - 5G HDMI User Guide
3
Module View
Components Summary
1
1.
Status Indicator LED
The status indicator allows you to monitor various system conditions. See
the LED Indicators section for more information on the status indicator.
2.
Power Indicator LED
The power indicator allows you to monitor the power status of the system.
See the LED Indicators section for more information on the power indicator.
3.
Power Button
The power switch turns ON and OFF the Wireless HDMI module. Actual
behavior of the power switch can be customized in Windows Control Panel.
4.
IR Blaster Port
Connect the IR Blaster included with the wireless HDMI system to this port.
The IR Blaster enables the wireless HDMI system to control your HDMI
devices by sending signals that mimic those of a remote control.
5.
HDMI Port
The HDMI port allows you to connect the output device to the transmitter
using an HDMI cable. HDMI provides uncompressed all-digital audio/video
signal that supports standard, enhanced, or high-definition video and
multi-channel audio.
6.
Power Connection Port
The power connection port allows you to power the module using the power
adapter.
*This port does not support traditional USB functions.
AITech - 5G HDMI User Guide
4
Module View
Receiver
AITech - 5G HDMI User Guide
5
Module View
Components Summary
1.
Infrared Sensor
The infrared communication sensor allows convenient wireless control of
the provided receiver using a wireless remote control.
2.
Status Indicator LED
The status indicator allows you to monitor various system conditions. See
the LED Indicators section for more information on the status indicator.
3.
Power Indicator LED
The power indicator allows you to monitor the power status of the system.
See the LED Indicators section for more information on the power indicator.
4.
Power Button
The power switch turns ON and OFF the Wireless HDMI module. Actual
behavior of the power switch can be customized in Windows Control Panel.
5.
HDMI Port
The HDMI port allows you to connect the display device to the receiver
using an HDMI cable. HDMI provides uncompressed all-digital audio/video
signal that supports standard, enhanced, or high-definition video and
multi-channel audio.
6.
Power Connection Port
The power connection port allows you to power the module using the power
adapter.
*This port does not support traditional USB functions.
AITech - 5G HDMI User Guide
6
Module View
Status Indicators
Power Indicator (Left LED)
LED Status
Solid Red
No Color
AITech - 5G HDMI User Guide
Module Powered ON
Module Powered OFF
Status Indicator (Right LED)
LED Status
Solid Blue
No Color
Transmitter and receiver
link established
No link established
7
System Setup
Connection Examples
NOTE: These are example connections only
AITech - 5G HDMI User Guide
8
System Setup
Optimizing System Performance
As with all wireless type products, the system’s performance can be
affected by its environment and any obstruction between the
transmitter and receiver. Follow the suggestions below to create an
optimal environment for your new Wireless HDMI system. Proper
placement of the receiver and transmitter units will ensure a strong
connection for superior performance:
Use one system per room, placing the transmitter and receiver units for
each system in the same room.
If you use a 5GHz WLAN or cordless phone, place those in a
different room.
Do not place either unit on a metallic rack.
Place the transmitter unit as high up as possible.
Maximum operating distance is approximately 20m or 65 feet with a
line of sight path, actual performance may vary depending on the
user's environment.
Be sure to keep at least 30cm or 1 foot minimum distance between
the transmitter and receiver units.
Keep in mind the Wireless HDMI system may be affected by
interference from other wireless products and/or signal attenuation
(weakening) due to the proximity of certain objects/materials such
as walls, floors, doors, and other construction materials that contain
metal. Large home appliances may also affect performance such as
refrigerators, washers and dryers.
AITech - 5G HDMI User Guide
9
System Connections
HDMI Connection (Transmitter)
NOTE: These are example connections only
AITech - 5G HDMI User Guide
10
System Connections
Power Connections (Transmitter)
The system allows you to power the module via either an AC power adapter
or a USB Power Y-Cable (both provided with your system).
Connecting via the power adapter
AITech - 5G HDMI User Guide
11
System Connections
HDMI Connection (Receiver)
Power Connection (Receiver)
AITech - 5G HDMI User Guide
12
System Connections
IR Blaster Connection IR Sensor Connectionb
In home theater settings IR blasters are used to distribute signals to all components
that are normally controlled only by remote control. They are essential if the
components are placed in different rooms or behind cabinet doors.
Transmitter Side
Receiver Side
When connecting please ensure that you
place the IR Blaster in close proximity to the
display device and the IR Sensor in an area
accessible to the remote control’s infrared
signal.
*The system’s receiver features a built-in IR
sensor that allows for direct remote control use.
You may also connect an external IR sensor either
separately or for simultaneous use with the
internal IR sensor.
AITech - 5G HDMI User Guide
13
Specifications
System Features
128bit AES Encryption for secured wireless video transmission
Motiion JPEG compression Technology
40 meter LOS transmission system
20 - 30ms System Latency
Supports: IR Blasting / 802.11h DFS / HDMI 1.3 / HDCP 1.1 & 1.2 /
CEC
AITech - 5G HDMI User Guide
14
Specifications
Transmitter Specifications
I/O Connectors
1x HDMI Output (19 pins, Type A)
1x 3.5mm Jack (IR Blaster)
1x USB Power Connector
Resolution Support
IR Blasting Frequency
HDMI Version
HDCP Version
DFS
LED
Operating Frequency
Antenna
640x480 @ 85 fps
800x600 @ 85 fps
1024x768 @ 75 fps
1280x1024 @ 30 fps
1600x1200 @ 30 fps
1440x900 @ 30 fps
1680x1050 @ 30 fps
1920x1080 @ 30 fps
38Khz
HDMI 1.3
HDCP 1.2
Supporst 802.11h DFS
Power ON/OFF
Signal Link
5.18GHz - 5.825GHZ
MIMO 2T3R
Power Adapter
Operating Temperature
AC Input: 100V - 240V (50 - 60Hz)
DC output: 5V/2A
0 - 40ºC
AITech - 5G HDMI User Guide
15
Specifications
Receiver Specifications
I/O Connectors
1x HDMI Output (19 pins, Type A)
1x 3.5mm Jack (IR Receiver)
1x IR Sensor
1x USB Power Connection Port
Resolution Support
IR Blasting Frequency
HDMI Version
HDCP Version
DFS
LED
Operating Frequency
Antenna
640x480 @ 85 fps
800x600 @ 85 fps
1024x768 @ 75 fps
1280x1024 @ 30 fps
1600x1200 @ 30 fps
1440x900 @ 30 fps
1680x1050 @ 30 fps
1920x1080 @ 30 fps
38Khz
HDMI 1.3
HDCP 1.2
Supports 802.11h DFS
Power ON/OFF
Signal Link
5.18GHz - 5.825GHz
MIMO 2T3R
Power Adapter
Operating Temperature
AC Input: 100V - 240V (50 - 60Hz)
DC output: 5V/2A
0 - 40ºC
AITech - 5G HDMI User Guide
16
Loading...