Air Squared P16H30N3.25R User Manual

US
World
Max. Pressure
20 psig
Max. Flow
8.5 cfm
240 lpm
Rated Power
0.75 hp
0.56 kW
Motor Type
Brushless DC or AC
Voltage
24V DC
Avg. Sound Level
45 dB(A)
Net Weight
14 lb
6.35 kg
Port Configuration
1/2” NPT
Ambient Temp.
0°F - 104°F
-20°C - 40°C
Model Number
P16H30N3.25R
Scroll Compressor
Air Squared
Manufacturing, Inc.
- 100% Oil-Free
- Low Sound Levels
- Balanced, Smooth, Rotary Motion
- High Efficiency
- Long Product Life
- Continuous Duty
- Small Compact Design
- Lightweight
- Minimal Pulsation
- Field Serviceable
Technical Overview
P16H30N3.25R
40 Years of Scroll Technology
Product Features
-
Brushless DC or AC Motor
- Attached Cooling Fan
- DC Controller Available For Purchase
Optional Configurations
Qualified OEM designers should consult Air Squared Manufacturing, Inc. for custom
configurations and application specific requirements. Contact info@airsquared.com.
The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable. Air Squared, Inc. does not warrant, guarantee, or assume liability in connection with this information.
Application conditions may adversely affect performance and product life. It is the responsibility of the user to determine the suitability of the product for intended use.
!
Power Consumption
Flow Characteristics
Air Squared
Manufacturing, Inc.
P16H30N3.25R
Performance
Notes
Copyright 2012  Air Squared Mfg., Inc.
- Adequate cooling is required in most applications.
- Custom configurations may be availab le. Contact info@airsquared.com for more information.
41312.DT3112
(mm)
(U.S., Metric)
3001 Industrial Lane #3
Broomfield, CO 80020 USA P: (303) 466-2669 F: (303) 466-4425 http://airsquared.com
Data reflects volumetric flow and electrical power consumption of nominal units with standard Brushless DC motor and controller. Brushless DC motors are variable speed. Electronic controller module is required to operate Brushless DC motor.
Dimensions
Brushless DC
AC
Loading...