Airlive OD-300CAM User Manual
OD-300CAM
1/4 CMOS Dual Stream
Outdoor IR IP Camera
User’s Manual
e
A
e
n
s
s
t
t
b
t
g
h
r
n
Declaration of Conformity
We, Manufacturer/Importer
OvisLink Corp.
5F., NO.6, Lane 130, Min-Chuan Rd.,
Hsin-Tien City, Taipei County, Taiwa
Declare that the product
1/4 CMOS Dual Stream Outdoor IR IP Camera
AirLive OD-300CAM
is in conformity with
In accordance with 2004/108 EEC-EMC Directive and 1999/5 EC-R & TTE Directive
Claus
■ EN 55022:2006,Class
Description
Limits and methods of measurement of radio disturbanc
characteristics of information technology equipme
■ EN 61000-3-2:2000+A2 : Disturbances in supply systems caused by household appliance
2005, Class A and similar electrical equipment "Harmonics
■ EN 61000-3-3:1995+A1: Disturbances in supply systems caused by household appliance
2001+A2:2005 and similar electrical equipment "Voltage fluctuations
■ EN 55024:1998+A1 : Information Technology equipment-Immunity characteristics-Limi
2001+A2:2003 And methods of measuremen
■ EN 60950-1:2001+ Safety for information technology equipment including electrica
A11:2004
■ CE markin
usiness equipmen
Manufacturer/Importe
Signature ：
Name ： Albert Ye
Position/ Title： Vice President (Stamp) Date： 2008/10/15
AirLive OD-300CAM CE Declaration Statement
Country Declaration Country Declaration
cs
Česky [Czech]
da
Dansk [Danish]
de
Deutsch
[German]
et
Eesti [Estonian]
en
English
es
Español
[Spanish]
el
Ελληνική [Greek]
fr
Français [French]
it
Italiano [Italian]
lv
Latviski [Latvian]
sv
Svenska
[Swedish]
OvisLink Corp. tímto prohlašuje, že tento AirLive
OD-300CAM je ve shodě se základními
požadavky a dalšími příslušnými ustanoveními
směrnice 1999/5/ES.
Undertegnede OvisLink Corp. erklærer herved, at
følgende udstyr AirLive OD-300CAM overholder
de væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
Hiermit erklärt OvisLink Corp., dass sich das
Gerät AirLive OD-300CAM in Übereinstimmung
mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Käesolevaga kinnitab OvisLink Corp. seadme
AirLive OD-300CAM vastavust direktiivi
1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
Hereby, OvisLink Corp., declares that this AirLive
OD-300CAM is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Por medio de la presente OvisLink Corp. declara
que el AirLive OD-300CAM cumple con los
requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ
ΟΤΙ AirLive OD-300CAM ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ
1999/5/ΕΚ.
Par la présente OvisLink Corp. déclare que
l'appareil AirLive OD-300CAM est conforme aux
exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE
Con la presente OvisLink Corp. dichiara che
questo AirLive OD-300CAM è conforme ai
requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.
Ar šo OvisLink Corp. deklarē, ka AirLive
OD-300CAM atbilst Direktīvas 1999/5/EK
būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Härmed intygar OvisLink Corp. att denna AirLive
OD-300CAM står I överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv
1999/5/EG.
lt
Lietuvių
[Lithuanian]
nl
Nederlands [Dutch
mt
Malti [Maltese]
hu
Magyar
[Hungarian]
pl
Polski [Polish]
pt
Português
[Portuguese]
sl
Slovensko
[Slovenian]
sk
Slovensky [Slovak]
fi
Suomi [Finnish]
Íslenska [Icelandic]
no
Norsk [Norwegian]
Šiuo OvisLink Corp. deklaruoja, kad šis AirLive
OD-300CAM atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Hierbij verklaart OvisLink Corp. dat het toestel AirLive
OD-300CAM in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen
van richtlijn 1999/5/EG.
Hawnhekk, OvisLink Corp, jiddikjara li dan AirLive
OD-300CAM jikkonforma mal-ħtiġijiet essenzjali u ma
provvedimenti oħrajn relevanti li hemm fid-Dirrettiva
1999/5/EC.
Az OvisLink Corporation kijelenti, hogy az AirLive
OD-300CAM megfelel az 1999/05/CE irányelv
alapvető követelményeinek és egyéb vonatkozó
rendelkezéseinek.
Niniejszym OvisLink Corp oświadcza, że AirLive
OD-300CAM jest zgodny z zasadniczymi wymogami
oraz pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
OvisLink Corp declara que este AirLive OD-300CAM
está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
OvisLink Corp izjavlja, da je ta AirLive OD-300CAM v
skladu z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
OvisLink Corp týmto vyhlasuje, že AirLive
OD-300CAM spĺňa základné požiadavky a všetky
príslušné ustanovenia Smernice 1999/5/ES.
OvisLink Corp vakuuttaa täten että AirLive
OD-300CAM tyyppinen laite on direktiivin 1999/5/EY
oleellisten vaatimusten ja sitä koskevien direktiivin
muiden ehtojen mukainen
Hér með lýsir OvisLink Corp yfir því að AirLive
OD-300CAM er í samræmi við grunnkröfur og aðrar
kröfur, sem gerðar eru í tilskipun 1999/5/EC.
OvisLink Corp erklærer herved at utstyret AirLive
OD-300CAM er i samsvar med de grunnleggende
krav og øvrige relevante krav i direktiv 1999/5/EF.
A copy of the full CE report can be obtained from the following address:
OvisLink Corp.
5F, No.6 Lane 130,
Min-Chuan Rd, Hsin-Tien City,
Taipei, Taiwan, R.O.C.
This equipment may be used in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, SK,
SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR
1 AirLive OD-300CAM User’s Manual
COPYRIGHT
Copyright 2005/2006 by this company. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of this company
This company makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular
purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not this company, its distributor, or its dealer)
assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents hereof without obligation to notify
any person of such revision or changes.
All brand and product names mentioned in this manual are trademarks and/or registered trademarks of
their respective holders.
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This equipment must be installed and operated in accordance with provided instructions and a
minimum 20 cm spacing must be provided between computer mounted antenna and person’s body
(excluding extremities of hands, wrist and feet) during wireless modes of operation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
AirLive OD-300CAM User’s Manual 2
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the authority to operate equipment.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In
order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to
the antenna shall not be less than 20cm (8 inches) during normal operation.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication
terminal Equipment and the mutual recognition of their conformity (R&TTE)
The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal
Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However,
special attention must be paid to the dangers of electric shock and static electricity when working with
electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed
at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark,
Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain,
Sweden, and the United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states: Iceland,
Liechtenstein, Norway, and Switzerland.
EU Countries Not intended for use
None.
3 AirLive OD-300CAM User’s Manual
OD-300CAM Outdoor 15M IR IP
Camera
- Contents –
CHAPTER1: MINIMUM SYSTEM REQUIREMENT ............................. 4
CHAPTER2: USING IP CAMERA VIA WEB BROWSER .................... 5
2.1 Camera Installation ........................................................................................................................ 6
CHAPTER3: USING IP CAMERA VIA MOBILE PHONE .................. 10
CHAPTER4: CONFIGURATION OF MAIN MENU ............................ 11
4.1 Live View ..................................................................................................................................... 12
4.2 Setting ......................................................................................................................................... 14
4.3 Client Setting ............................................................................................................................... 15
4.4 Image Setup ................................................................................................................................ 16
CHAPTER5: SETTING-BASIC .......................................................... 17
5.1 System ........................................................................................................................................ 18
5.2 Camera ........................................................................................................................................ 22
5.3 Network ....................................................................................................................................... 28
5.4 Security ....................................................................................................................................... 41
CHAPTER6: SETTING-ADVANCE .................................................... 45
6.1 FTP Client ................................................................................................................................... 46
6.2 SMTP .......................................................................................................................................... 53
6.3 HTTP event ................................................................................................................................. 62
6.4 Alarm Output ............................................................................................................................... 68
6.5 Schedule ..................................................................................................................................... 72
6.6 Alarm Input .................................................................................................................................. 74
6.7 Alarm buffer ................................................................................................................................. 75
6.8 Motion Detection ......................................................................................................................... 76
6.9 System Log ................................................................................................................................. 78
CHAPTER7: APPENDIX ................................................................... 79
AirLive OD-300CAM User’s Manual 4
Item
Requirements
CPU
Pentium 4 1600MHz (or equivalent AMD)
Graphic Card
64 MB RAM graphic cards(or equivalent on-board graphic cards)
RAM
512 MB
Operating System
Windows 98, Windows ME (Please see Note)
Windows2000, 2003, XP, Vista
Web Browser
Internet Explore 6 or later
Chapter1: Minimum System Requirement
We strongly recommend your computers follow our minimum requirements in order to use this
IP-Camera normally. If computer level is lower than this, it might cause some problems.
Note:
1. If you are using Windows 98 or Windows ME, please install IP Installer before using WEB
UI to ensure the system runs normally.
2. If you can't view the record video file, please install Xvid codec while installing Intelligent
IP Installer. (For Windows 98, ME or 2000 server, the codec might not work properly. You’ll
need to download Xvid codec 1.0 from the internet.
3. Please always update the latest Windows component. (.Net Framework, Windows Media
Player, Enhance ActiveX Security)
5 AirLive OD-300CAM User’s Manual
Chapter2: Using IP Camera via Web Browser
1. Start your web browser, and enter the IP address or host name of the IP camera in the
Location / Address field of your browser.
Note:
If you only want to view the video without setting page, enter
“http ://< IP>/index2.htm” as your web URL.
2. Use the default account “admin” and default password “admin”.
Note:
The default user name “admin” and the password are set at the factory for the
administrator. You can change them in the Account Menu (Please check“Setting
→ Basic → Security → Account”)
AirLive OD-300CAM User’s Manual 6
3. The monitor image will be displayed in your browser. In the far left side of main
configuration are Setting, Client Setting, and Image Setup. For more details, you can check
Chapter 5.2、Chapter 5.3、Chapter 5.4.
2.1 Camera Installation
1. Insert CD into your PC/Laptop
2. Auto Run Screen then shows up, click “setup wizard” to install the configuration tool software
7 AirLive OD-300CAM User’s Manual
3. After complete installation, Run the configuration tool software
4. The Software scans the network and finds the IP Camera, then list in the dialog box.
5. If the Camera’s IP address is in the same IP segment as your LAN, select the founded IP Camera
and click “Link to IE” to proceed.
AirLive OD-300CAM User’s Manual 8
6. If the IP is not in your IP segment, select the founded IP Camera and click “Setup”
Note that the text color of the listed IP Camera is red if it is not in same the IP segment with your PC.
7. Follows setup instruction to change the IP address of the IP Camera.
9 AirLive OD-300CAM User’s Manual
8. At the end of the setup instruction, the IP Camera Reboots
9. Click the Search button to search again
10. Click “Link to IE” to proceed.
11. The tool launch your Internet Explorer and prompts up the login dialog
12. Enter default user name and password: admin / airlive
13. After a successful login, the browser asks for ActiveX installation.
14. Install the ActiveX, and the browser shows the video stream.
Note:
If you need a public IP for your Router, please contact your ISP for the service.
AirLive OD-300CAM User’s Manual 10
Chapter3: Using IP Camera via Mobile Phone
To use IP cameras via mobile phones, please make sure your RTSP is set to “On” (Default is “On”).
To change the settings of IP cameras, Please check “Settings → Basic → Camera → General.”
1. 3G Mobile Phone Streaming Viewing
For 3G mobile phone viewing, type “ rtsp://<IP>:<PORT>/video.3gp ” into your 3G Streaming
Link. <IP> is the Public IP address of your IP camera; <PORT> is the RTSP port of your IP
camera (Default value is 554.) Example: rtsp://100.10.10.1:554/video.3gp
Note: You can also use RTSP clients (RealPlayer, VLC, QuickTime Player…etc.)
to view RTSP streaming, just type in “rtsp://<IP>:<PORT>/video.3gp” as the
Player URL
2. 2.5G Mobile Phone WAP Viewing
For 2.5G mobile phone viewing, type “ <IP>/mobile.wml ” into your 2.5G WAP Browser.
<IP> is the Public IP address of your IP camera.
3. 2.5G Mobile Phone Browser Viewing
For 2.5G mobile phone viewing, type “ <IP>/mobile.htm ” into your 2.5G Web Browser.
<IP> is the Public IP address of your IP camera.
11 AirLive OD-300CAM User’s Manual
Chapter4: Configuration of Main Menu
In the far left side of main configuration are Setting, Client Setting, and Image Setup. For
more details, you can check Chapter 4.2、Chapter 4.3、Chapter 4.4.
In your right hand side, you can use Live View in your main Browser. There are Snapshot,
Zoom and Audio and Video Play four different function. You can see more details as follow.
AirLive OD-300CAM User’s Manual 12
Symbols
Meaning
a snapshot window will appear
Save
to save the picture in your computer
Close
to return to the view page
full Screen
4.1 Live View
A. Snapshot
You can capture a still image shot by the camera and save it in your computer.
B. Zoom In / out the image via the monitor window
Click to display the digital zoom in window.
Pull the to adjust the digital zoom range, and it will
be showed on the above window.
You can use the left click of your mouse to move the to any where on the window.
13 AirLive OD-300CAM User’s Manual
Symbols
Meaning
Pause the current video
Play the video
Stop the current video
Record the current video
Symbols
Meaning
Note
Speakers turned on
mean the speakers of your computer are turned on
to transmit the sounds from the connected IP
camera(s)
Speakers turned off
Microphone turned on
mean you can broadcast to the connected IP
camera(s) via the Ethernet using your microphone
Microphone turned off
Volume control bar
C. Video play buttons
D. Audio buttons
AirLive OD-300CAM User’s Manual 14
4.2 Setting
This function is only for the Administrator. Click this button to get into the Basic and Advance
settings menu.
Click Basic folder, there are four sub-folders including System, Camera, Network, and
Security. For more information, you can see Chapter 5.1、Chapter 5.2、Chapter 5.3 and
Chapter 5.4.
Click Advance folder, there are four sub-folders including FTP Client, SMTP, HTTP event,
Schedule, Motion Detection, and System Log. For more information, you can see Chapter
6.1、Chapter 6.2、Chapter 6.3、Chapter 6.4、Chapter 6.5、Chapter 6.6、
Chapter 6.6、Chapter 6.6 and Chapter 6.9.
15 AirLive OD-300CAM User’s Manual
4.3 Client Setting
This function is only for the clients. Click this button to control Mode, View Size, Protocol, and Video
Buffer.
4.3.1 Mode
Click the pull-down box to choose between MPEG4 and MJPEG video compression mode.
MJPEG streaming is unavailable if RTSP mode is “On.”
(Please check “Setting → Basic → Camera → General”)
Note：MJPEG streaming is unavailable if RTSP mode is On.
4.3.2 View Size
Select the desired display image resolution to 640X480 or 320X240.
4.3.3 Protocol
Select the transferring protocol from TCP, UDP, HTTP and Multicast.
4.3.4 Video Buffer
Turn the Video Buffer function On / Off. The Video Buffer function makes the streaming more
smoothly in unsteady network environment, but might cause a little delay in live viewing.
AirLive OD-300CAM User’s Manual 16
4.4 Image Setup
You can use the tool bar to optimize video Brightness, Contrast, Saturation and Hue.
4.4.1 Brightness
The higher value the brightness is, the brighter the image is.
4.4.2 Contrast
The contrast is a measure of a display system, defined as the ratio of white to black that the system is
capable of producing. The higher value the contrast is, the more delicate of color you can have.
4.4.3 Saturation
The saturation of a color is determined by a combination of light intensity and how much it is
distributed across the spectrum of different wavelengths. The higher value the saturation is, the more
colorful the image will be.
4.4.4 Hue
Hue is one of the three main attributes of perceived color, affected by different wavelength of color.
Withhigher value of hue, color will be much more vivid.
4.4.5 Default
After the adjustment of all setting, you can still click Default to make the setting back to the original
setting.
17 AirLive OD-300CAM User’s Manual
Chapter5: Setting-Basic
Click the folder of Basic to display the sub folders including System, Camera, Network, and Security.
AirLive OD-300CAM User’s Manual 18
5.1 System
Click the folder of System to display the sub-folders including Information, Date / Time, and
Initialize.
19 AirLive OD-300CAM User’s Manual
5.1.1 Information
The Information page provides the product factory information which includes Product Name,
Firmware Version and Web Version.
AirLive OD-300CAM User’s Manual 20
5.1.2 Date / Time
The Date/ Time page displays all options of time setting.
Current date / time: This displays the current date and time of this IP Camera.
PC clock: This displays the date and time of the monitoring PC clock.
Date / Time format: You can click the pull down box to select different time display formats.
Adjust: You can select one of those four adjusting modes for your IP Camera.
Keep current setting: Select this mode to keep the current date and time of this IP Camera.
Synchronize: Select this mode to keep the date and time of this IP Camera is the same as the
monitoring PC.
Manual setting: Select this mode to adjust manually the date and time of this IP Camera.
Synchronize with NTP: Specify the NTP server name and the Refresh Interval to synchronize
the date and time of this IP Camera with those of the time server, known as the NTP server.
Time Zone: You can select the Time Zone of the format from Greenwich Mean Time. The time will
display the same as the current date / time option.
Note:
The NTP server (Network Time Protocol) is the time server which is an Internet
standard protocol built on the top of TCP/ IP. This assures accurate synchronization
to the millisecond of computer clock times in a network of computers.
21 AirLive OD-300CAM User’s Manual
5.1.3 Initialize
Reboot: Click this bottom to reboot this IP Camera. A confirmation dialogue will appear and then
click “OK” to process. It takes two minutes to reboot this IP Camera.
Factory Default: Click this bottom to reset this IP Camera to the factory default setting. A
confirmation dialogue will appear and then click “OK” to process. The network indicator on this IP
Camera will start to blink. This IP Camera will reboot automatically after completing adjustments to
the default setting. Don't turn off this IP Camera until the device reboots.
Backup Setting: You can save the setting data of this IP Camera into a file. Click “Save” and
follow the instructions on the browser to save the setting data file to your specified location.
Restore Setting: Download the saved setting data of this IP Camera. Click “Browse” and select
saved file. Click “OK” and this IP Camera is adjusted according to the loaded data and then restarted.
Firmware Update: Upgrade the device software. Click “Browse” and select the file for upgrading. A
confirmation dialogue will appear. Click “OK” to start upgrading. This IP Camera will reboot upon
completion.
Note:
Use only upgrade files that are special for this IP Camera. Otherwise problems may
occur. Don't turn off the IP Camera power or disconnect the network until the
upgrading is completed.
Upload Language Pack: Upgrade the device language pack. Click “Browse” and select the file for
upgrading. A confirmation dialogue will appear. Click “OK” to start upgrading. The upgrade is applied
AirLive OD-300CAM User’s Manual 22
immediately. The default language is “English”.
5.2 Camera
Click the folder of Camera to display the sub folders including General, MPEG4 and MJPEG.
23 AirLive OD-300CAM User’s Manual
5.2.1 General
RTSP : Switch On / Off
Note: RTSP (Real Time Streaming Protocol) is a protocol for use in streaming media
system which allows clients to remotely control a streaming video server. RTSP is
supports by most of the media clients such as Real Player, QuickTime and VLC...etc.
Image Rotate: You can mirror or flip the display screen.
Night Mode: You can choose Auto / Off. If you choose Auto option, the camera will adjust
automatically to perform well when the environment is dark
Lighting: You can choose the environment among 50 Hz, 60 Hz , and Outdoor.
White Balance: You can choose the white balance to Auto, Florescent, Incandescent and Black &
White.
IR: You can turn LEDs light On / Off and Auto. If you select Auto mode, you can adjust threshold
for LEDs Auto-On and Auto-Off respectively. In the right hand side of threshold, if the tool bar is closer
to the right, the LEDs will auto-on easily in the dark environment. Conversely, in the left hand side of
threshold, if the tool bar is more approach to the left, the LEDs will auto-off easily in the bright
environment.
Overlay:
Text Overlay: You can see some information on the display screen which includes Date / Time
and user-defined text. Also, you can change the background color.
Privacy Mask: You can cover a specific area of the video image.
Loading...