Airlink101 AKVM-U22 User Manual

Ver . 1A

Section 2

Installation

Quick Installation Guide

2-Port USB KVM Switch
with Audio

Model # AKVM-U22

Section 1

1

Introduction

Note: If you use Windows 95/98/SE and have not yet

installed a USB mouse on your computer, it is
recommended that you install the USB mouse on
your computer first before connecting it to the KVM
Switch.

Y ou may also need to enable the USB option in the
BIOS on some older computers. If your USB interface
does not work, please check the USB option status in
the computer’s BIOS.

Step 1 Insert the provided Software CD into the CD

drive and wait for the autorun page to display .

Note: If the autorun page does not appear go to Start,

Run, and type D:\autorun.exe (where D is the letter
of your CD drive) and click OK.

Step 2 Click Install USB KVM Switcher on the

autorun page.

Step 4 Install the KVM Switcher software on all the

computers that will be connected to the KVM.

Step 5 Connect the shared keyboard, monitor , and

mouse to the KVM switch. You may also connect
speakers and microphone to the KVM switch.

The 2-Port USB KVM Switch with audio enables you
to access, control, and reboot multiple USB-enabled
multimedia computers using only one USB keyboard,
USB mouse, and monitor. Its audio and microphone port s
also allows you to share one set of speakers and micro­phone.

With detachable KVM cables and features such as Plug­and-Play and hot-pluggability , you can enjoy maximum
flexibility and convenience with its compact and ad­vanced design.

Step 3 Follow the on-screen instructions to complete

the software installation.

Step 6 Connect each of the detachable KVM cables

to the KVM switch and a computer’s video and usb
ports. You can also connect the cables to the
computer’s audio and microphone ports.

Continue on Back

Section 3

Operations

There are several methods to switch between the
computers:

Using the Switch Button or the Hotkey Sequence.

Switch Button

The Switch Button lets you directly change between
the computers. Simply press the button on the KVM
to select the computer.

Hotkey Sequence

The Hotkey Sequence consists of three specific
keystrokes pressed on the keyboard:

Ctrl + Alt + [Command key]

Note: The factory default command key is:

Ctrl + Alt + 1 (or 2) for PC 1 (or 2)

The KVM Switcher icon will appear in the system tray
once you have installed the software.

: No live connection detected

: Current active PC channal is on port 1

: Current active PC channal is on port 2

Right-click on the icon to bring up the context menu
and select the PC you wish to change to.

Select Settings to bring up the KVM Switcher
configuration screen.

For example, you can specify the command key for
switching to PC 1 as Ctrl + Alt + A by typing an A (not
case-sensitive) in the editable field and click OK.

All the keys on the keyboard are qualified to be used as
command keys except Alt, Ctrl, Shfit, Caps, Tab, Esc
and the function keys and edit keys.

Advanced Options

• Fix Audio Port :

Check this option and then select the PC to fix the
audio/mic channel to the selected PC. Once this
option is checked, the audio/mic channel will be fixed
and become non-switchable.

• Auto Scan Period :

Select the Autoscan period from 10 ~ 60 seconds with
an increment of 5 seconds. The Autoscan period is
the time your KVM Switch will wait to switch to next
PC.

Section 4

Y ou can also use ScrLk + ScrLk to switch between
computers for non-Windows operating systems.

Note: Each keystroke of the Hotkey Sequence should

be pressed within 2 seconds; otherwise, the Hotkey
Sequence will not be validated.

For Windows operating system, you may also use the
KVM Switcher software to change between the
computers.

Y ou may use the configuration screen to define the
command key used for the Hotkey Sequence.

Technical Support

Email: [e-mail]
T oll Free: 1-888-746-3238
Web Site: www .airlink101.com

Copyright © 2006 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo,
specific product designations, and all other words and logos that are identified as trademarks
and/or service marks are, unless noted otherwise, the trademarks and service marks of
AirLink101. All other product or service names are the property of their respective holders.
AirLink101 products are protected under numerous U.S. and foreign patents and pending
applications, mask work rights, and copyrights.