Airlink101 AIC1620W User Manual

SkyIPCam1620W

Wireless N MPEG4 3GPP Network Camera

Model # AIC1620W

User’s Manual

Ver. 1.0

- 1 -

Table of Content

CH A PT E R 1 ................................................................................................................................2

IN T RO D UC T IO N T O Y O U R C A ME R A ..........................................................................2

1.1 Checking the Package Contents...............................................................................................2

1.2 Getting to Know Your Camera ..................................................................................................2

1.3 Features and Benefits ...............................................................................................................4

1.4 System Requirements ...............................................................................................................5

1.5 Applications of the Camera .......................................................................................................6

CH A PT E R 2 ................................................................................................................................7

HA R DW A RE IN S TA L LA T IO N ...........................................................................................7

2.1 Connecting Your Camera to LAN..............................................................................................7

CH A PT E R 3 ................................................................................................................................9

CA M ER A C O N F I G U R AT I O N .............................................................................................9

3.1 Setting up Your Camera............................................................................................................9

3.2 Viewing Image via Your Camera..............................................................................................16

CH A PT E R 4 ..............................................................................................................................19

US I NG WE B C O N F I GU R AT I O N .....................................................................................19

4.1 Basic Setup..............................................................................................................................19

4.2 Network Settings .....................................................................................................................22

4.3 Setting up Video & Audio ........................................................................................................28

4.4 Event Server............................................................................................................................32

4.5 Motion Detect...........................................................................................................................35

4.6 Event Config ............................................................................................................................36

4.7 Tools ........................................................................................................................................40

4.8 RS-485.....................................................................................................................................41

4.9 Information...............................................................................................................................43

CH A PT E R 5 ..............................................................................................................................44

US I NG S K Y I P C A M UL T R A VIE W ..................................................................................44

5.1 Starting the Program ...............................................................................................................44

5.2 Main Window and Item Feature ..............................................................................................45

5.3 Accessing the Camera ............................................................................................................48

5.4 Recording / Playing Video.......................................................................................................53

5.5 Configuring the eMap View Setting.........................................................................................57

5.6 Configuring the System ...........................................................................................................62

5.7 Event Configuration.................................................................................................................63

5.8 Changing System Language...................................................................................................66

5.9 Terminating Operation.............................................................................................................67

CH A PT E R 6 ..............................................................................................................................68

A P P EN D IX ................................................................................................................................68

A.1 Specification ............................................................................................................................68

A.2 GPIO Terminal Application......................................................................................................69

A.3 Bandwidth Reference Guide ...................................................................................................70

A.4 Glossary of Terms ...................................................................................................................71

TECHNICAL SUPPORT............................................................................................................75

- 2 -

CS-Mount

Internal Microphone

LED Indicators

Screw Hole*

is used to attach

HAPTER

NTRODUCTION TO YOUR CAMERA

1.1 Checking the Package Contents

Check the items contained in the package carefully. You should have the following:



One SkyIPCam1620W Wireless N MPEG4 3GPP Network Camera



One 2dBi Dipole Antenna



One AC Power Adapter



One Wall Mount Kit



One GPIO & RS485 Adapter



One Ethernet Cable (Cat.5)



One Setup CD



One Quick Installation Guide

NOTE Once any item contained is damaged or missing, contact the store where you purchased the

product.

1.2 Getting to Know Your Camera

 Front and Top View

Power (left, steady amber light)

indicates the camera is powered on.

Link (right, flashing green light) indicates the camera’s network connectivity.

Removable Lens

the camera stand onto the camera by screwing the screw head of the camera stand into the screw hole of the camera.

allows the camera to receive sound and voice.

* The camera provides two screw holes that are located on its top and bottom panels, so that you can install the camera according

to your application.

- 3 -

 Rear View

GPIO

and RS485

Reset Button

will restart the

when it is pressed and held for five

DC Power Connector

Ethernet Cable Connector

which supports the NWay

Audio I/O Connectors

ects an external

Antenna

Connector

is used to connect the external devices.

connects the network cable,

protocol so that the camera can detect the network speed automatically.

camera when it is pressed quickly;

seconds, the camera will restore the factory default settings.

Audio Out connects an external active speaker.

Mic In conn microphone.

connects the AC power adapter, in order to supply power to the camera.

- 4 -

1.3 Features and Benefits

Thank you for purchasing the SkyIPCam1620W Wireless N MPEG4 3GPP Network Camera, a standalone system that can be connected directly to your network.

With MPEG4 image compression technology, you can record streaming video that utilizes high quality images to your hard drive, enable motion detection and set up automated e-mail alerts for security. The built-in microphone and audio ports provide you with the extensive 2-Way Audio function, allowing you to “listen” and “talk” to the area monitored by the camera. The camera can be managed remotely, so that you can use a web browser to access and control it from any desktop/notebook computer or mobile phone over the Intranet or Internet.

The simple installation procedures and web-based interface allow you to integrate it into your wired or wireless network easily. The camera features Wireless N technology which provides higher bandwidth and faster transmission speed as well as great flexibility of installation. With comprehensive applications supported, the camera is your best solution for demanding surveillance and remote monitoring applications.

 MPEG4/MJPEG Dual-codec Supported

The camera provides you with excellent images by the MPEG4/ MJPEG dual-codec selectable technology, allowing you to adjust image size and quality, and bit rate according to the networking environment.

 Flexible 2-Way Audio Capability

The camera allows you to connect an external microphone to receive on-the-spot audio via the Internet, allowing you to monitor the on-site voice. In addition, you can connect an external active speaker to the camera to speak through the camera (supporting mono audio only).

 Supports RTSP

The camera supports RTSP (Real Time Streaming Protocol), which is a technology that allows you to view streaming media via the network. You can view the real-time video with the Quick Time player or RealPlayer. To view the real-time streaming image on your computer, open the RTSP supported player and enter the link:

rtsp://(IP address of the camera)/mpeg4.

 I/O Connectors and RS-485 Provided

The I/O connectors (IN/OUT) of the camera provide the physical interface to send and receive digital signals to a variety of external alarm devices (such as motion detection, event triggering, alarm notification, and a variety of external control functions). The pins TX+ & TX- of the I/O connectors are used for RS-485 data transmission, which allow you to connect a special featured device (such as an external camera stand with Pan/Tilt function), configure the settings and control the device from the GPIO Trigger window of Web Configuration.

 Remote Control Supported

By using a standard Web browser or the complimentary UltraView software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also allowed to monitor the image and take snapshots via the network.

 Multiple Profiles Supported

The camera supports multiple profiles simultaneously, so that you can separately set up different image settings (such as image quality and frame rate) for the three video types of the camera: MPEG4, MJPEG, and 3GPP.

 Multiple Platforms Supported

The camera supports multiple network protocols, including TCP/IP, SMTP e-mail, HTTP, and other Internet related protocols. Therefore, you can use the camera in a mixed operating system environment, such as Windows 7 / Vista / XP.

- 5 -

 Multiple Applications Supported

Through the remote access technology, you can use the cameras to monitor various objects and places for your own purposes. For example, babies at home, patients in the hospital, offices and banks, and more. The camera can capture both still images and video clips, so that you can keep the archives and restore them at any time.

1.4 System Requirements

 Networking



LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet; Auto-MDIX



WLAN:

 Accessing the Camera using Web Browser

- Supported Browsers: Microsoft® Internet Explorer 6.0 or above; Apple Safari and Mozilla



CPU: Intel Pentium III 800MHz or above



RAM: 512MB



Resolution: 800x600 or above

 Accessing the Camera using Software SkyIPCam UltraView



Platform: Microsoft® Windows® 7, Vista, and XP



Hard Disk: 80GB or above



Resolution: 1024x768 or above



Hardware Requirement**

● 1~8 cameras connected: Intel Core 2 Duo; 2GB RAM

● 9~32 cameras connected: Intel Core 2 Quad; 4GB RAM

NOTE If you connect multiple cameras and monitor them simultaneously, it is recommended that you use

a computer with higher performance.

Compatible with IEEE 802.11b/g/n networks, data rate up to 150Mbps*

Firefox with JAVA plug-in for MJPEG and QuickTime plug-in for MPEG4

- 6 -

1.5 Applications of the Camera

The SkyIPCam1620W can be applied in multiple applications indoor, including:

 Monitor local and remote places and objects via Internet or Intranet.

 Capture still images and video clips remotely.

 Upload images or send email messages with the still images attached.

The following diagram explains one of the typical applications for your camera and provides a basic example for installing the camera.

Home Applications

- 7 -

HAPTER

ARDWARE INSTALLATION

2.1 Connecting Your Camera to LAN

Step 1 Assemble and attach the provided wall mount kit to the camera.

Step 2 Attach the included external antenna to the camera.

Step 3 Connect one end of a network cable to the IP Camera and connect the other end to one of the

LAN ports on your router or switch.

NOTE You need to connect the camera to the local area network first in order to configure the wireless

settings. After the setup finished, you will be able to disconnect the network cable

Step 4 Power up the camera by connecting the supplied power adapter.

- 8 -

Step 5 Please verify the LED status on the front panel and make sure it is on and ready for use now.

• Power LED: Solid Amber

• Link LED: Flashing Green

Step 6 Please proceed to Chapter 3 for camera configuration.

- 9 -

HAPTER

AMERA CONFIGURATION

3.1 Setting up Your Camera

Step 1 Insert the provided CD into your computer’s CD ROM drive.

Step 2 Click on Install Utility and Software when the autorun menu pops up on the screen.

Note: If you do not see the autorun menu pops up on the screen, please go to your CD-ROM drive > UltraView folder > run “Setup.exe”.

- 10 -

Step 3 Click Install to install the utility.

Step 4 Click Finish when installation finishes.

- 11 -

Step 5 Open SkyIPCam Utility by double clicking on its icon on your desktop.

or clicking Start, then go to (All) Programs > Airlink101 SkyIPCam UltraView > SkyIPCam

Utility.

Step 6 Click on Search to find the camera on your network. Select the Camera you wish to configure and

click on Link.

Note If the Camera you wish to configure does not show up in the utility, make sure the camera is

properly connected to the same local network as your computer is, and the Green LED should be on. Click on Search to try again.

- 12 -

Step 7 When you are prompted for the username and password, enter “admin” for both Username and

Password, and click OK.

Step 8 The camera viewing window will appear. Click on Setup, then click on Smart Wizard.

- 13 -

Step 9 Enter a name for your camera and a location (i.e. Room 1). Create a password and enter it to

Admin Password and Confirm Password. This will change the admin password of the camera. It is recommended to modify the admin’s password to protect your privacy. Click Next.

Step 10 You can specify a static IP address to this camera by selecting Static IP, and enter IP, Subnet

Mask, Default Gateway, Primary/Secondary DNS addresses here provided by your ISP. If you are not sure how to configure Static IP Setting, please select DHCP. Click Next.

Note Be sure to enter Primary/Secondary DNS addresses assigned by your ISP if you set up Static IP for the camera so that the Email alert / FTP uploading can function properly.

- 14 -

Step 11 If you would like to set up email alerts that you can receive in the future, enter your email

information here. You can get this information from your Internet Service Provider. You can set this up at a later time. Click Next.

Step 12 Enter the Network ID (SSID) of your wireless network, or click on Site Survey and select from

the list. Select the Authentication and Encryption, and enter the security Key of your wireless network. This information is stored in your wireless AP/router. Click Next.

Note You may contact the manufacturer of your wireless router/AP’s to find out its SSID and wireless

security settings.

- 15 -

Step 13 Confirm your settings at this page. If everything is correct, click Apply to save the settings, then

the camera will restart in 50 seconds.

Step 14 After the camera is restarted, you can unplug the network cable from it. It will take around 1 or 2

minutes for the camera connecting to the wireless router/AP.

To make sure the wireless connection is successfully established, open the SkyIPCam Utility and click on Search. If the camera shows up in the list, it is connected to your wireless network successfully. If not, please verify the SSID and the wireless security settings you configured at Step 12 are correct.

- 16 -

3.2 Viewing Image via Your Camera

Method A > Access Camera from SkyIPCam Utility

Step 1A Open Airlink101 SkyIPCam Utility, select the camera you wish to connect to and click on Link

button. Go to Step 3.

Method B > Access Camera from Web Browser

Step 1B If you have assigned a static IP address for your camera, you may open the Web Browser on

your computer.

Step 2B Type the IP address of your camera in the Address bar, and press Enter.

- 17 -

Step 3 Enter administrator’s username and password of the camera, then click OK. The default

username and password are both “admin” if you did not make any change to it at Step 9, Section 3.1.

Step 4 Internet Explorer User: If this is the first time for your computer to view image from the web

configuration page, you will be prompted to install the ActiveX Control. Click on the bar on top of the screen and click on Run Add-on or Install ActiveX Control (depends on different IE versions).

Step 5 Click on Run, then you will be able to view the image.

- 18 -

Note If you are using Mozilla Firefox or Safari and you are not able to view any image, please make sure

you have Java and Quick Time add-ons installed.

- 19 -

HAPTER

SING

You can access and manage the camera through the Web browser and the provided software application SkyIPCam UltraView. This chapter describes the Web Configuration, and guides you through the configuration of the camera by using the web browser.

To open the Web Configuration page, please refer to Chapter 3.2, Viewing Image via Your Camera.

After you entered into the Web Configuration of the camera, click Setup on the main page. The Web Configuration will start from the Basic page.

EB CONFIGURATION

4.1 Basic Setup

The Basic menu contains three sub-menus that provide the system settings for the camera, such as the Camera Name, Location, Date & Time, and User management.

Basic >> System

 Basic

- Camera Name: Enter a descriptive name for the camera.

- Location: Enter a descriptive name for the location used by the camera.

 Indication LED This item allows you to set the LED illumination as desired. The available options include: Normal, OFF,

and Dummy. You can select OFF to turn off the camera’s LED signal in order to make it less noticeable, or you can select Dummy to leave the Link LED be on even when it is not connected to the network.

- 20 -

Basic >> Date & Time

 Date & Time

- TimeZone: Select the proper time zone for the region from the pull-down menu.

- Synchronize with PC: Select this option and the date & time settings of the camera will be

synchronized with the connected computer.

- Synchronize with NTP Server: Select this option and the time will be synchronized with the NTP

Server. You need to enter the IP address of the server and select the update interval in the following two boxes.

- Manual: Select this option to set the date and time manually.

Basic >> User

 Administrator

You can use this option to change the password for your camera

 General User

- 21 -

- User Name: Enter the user’s name you want to add to use the camera.

- Password: Enter the password for the new user.

When you are finished, click Add/Modify to add the new user to the camera. To modify the user’s information, select the one you want to modify from UserList and click Add/Modify.

- UserList: Display the existing users of the camera. To delete a user, select the one you want to delete and click Delete.

 Guest

- User Name: Enter the guest’s name you want to add to use the camera.

- Password: Enter the password for the new guest.

- UserList: Display the existing guests of the camera. To delete a user, select the one you want to

delete and click Delete.

NOTE A “General User” can access the camera and control the Function buttons of the camera’s Web

Configuration; a “Guest’ can only view the live view image from the main page of the Web Configuration while accessing the camera. Only the “Administrator” is allowed to configure the camera through the Web Configuration.

- 22 -

4.2 Network Settings

The Network menu contains three sub-menus that provide the network settings for the camera, such as the IP Setting, DDNS Setting, and IP Filter.

Network >> Network

 IP Setting

This item allows you to select the IP address mode and set up the related configuration.

- DHCP: Select this option to allow your router dynamically assign an IP address to your camera. When the camera starts up, it will obtain an IP address from the DHCP server of your router automatically. It is recommended to use Static IP instead of DHCP and assign a fixed IP address for each of your camera, so that you can always locate the camera on your network.

- Static IP: Select this option to assign a fixed IP address for the camera. You can use SkyIPCam Utility to obtain the related setting values.

Subnet Mask

Default Gateway

Primary/ Secondary DNS

Enter the IP address of the camera. The default IP setting is 192.168.2.240.

Enter the Subnet Mask of the camera. The default setting is 255.255.255.0.

Enter the Default Gateway of the camera. The default setting is 192.168.2.1.

DNS (Domain Name System) translates domain names into IP addresses. Enter the Primary DNS and Secondary DNS that are provided by ISP. It is usually recommended that you input the Default Gateway of your network, which is the IP address of your router. Check with your router manufacturer for that information.

THIS IS MANDATORY IF YOU WANT TO USE FTP OR EMAIL FUNCTIONS

- PPPoE: Select this option when you use a direct connection via DSL modem. You should have a PPPoE account from your Internet service provider. Enter your DSL account’s User Name and Password given by your DSL service provider. The camera will get an IP address from the ISP as starting up. If you are using a router, do NOT select this option.

NOTE Once the camera gets an IP address from the ISP as starting up, it automatically sends a

notification email to you. Therefore, when you select PPPoE as your connecting type, you have to set up the email or DDNS configuration in advance.

+ 53 hidden pages