Airlink101 AEN-U35SAB User Manual

Ver.

1A

• Screw

driver and screw set

Quick Installation Guide

3.5” USB2.0 SATA Enclosure

Model # AEN-U35SAB

Section 1

Package Contents:

• 3.5” SATA Enclosure with

Stand

• Power adapter

• USB 2.0 Cable

• Quick Installation Guide

Hard Drive Installation

Step 1 Use the provided screwdriver to remove the two screws on the right side

of the enclosure. Pull out the right panel.

Step 2 Attach the SATA connectors to your hard drive.

Step 3 With the hard drive label facing up, attach the guides to both sides of

the hard drive.

The picture below shows how the guide being attached to the hard drive
correctly. If the guides are not properly installed, the hard drive cannot be
inserted into the enclosure case.

Step 4 Line up the guides with the case, and slide the hard drive back in. The

enclosure should slide shut.

Step 5 Secure the two screws that were removed in step 1.

Step 6 Connect one end of the power cord to the back of the enclosure and

connect the other end to a power outlet.

Step 7 Connect one end of the USB cable to the enclosure and the other end

to your computer.

Step 8 Press the power button to turn the power ON.