Airlink101 ABT-U200 User Manual

Ver. 1A

Quick Installation Guide

Bluetooth® 2.0 USB Adapter

Model # ABT-U200

Package Content:

• Bluetooth® 2.0 USB

Adapter

• Driver & Utility CD

• Quick Installation Guide

Section 1

This Quick Installation Guide only provides basic instructions for installing the

product. For detailed information on using this product, please refer to the

User’s Manual on the supplied CD.

Installing the Software in Windows XP/2000/ME

Note: Do not connect the USB Bluetooth Adapter to your computer before you
install the provided software. You will be prompted to plug the device during the
installation.

Step 1 Insert the Bluetooth software installation CD into your CD-ROM drive.

When the auto-run screen appears, select Install Utility and Driver for
XP/2K/ME

Note: If the auto-run window does not appear automatically, go to Start -> Run

and type D:\Utility\XP_2K_ME\Setup.exe (where D is the letter of your CD­ROM drive) then click OK.

Step 2 When the welcome screen appears, click Next. Then click Next on the

two screens that follow, then click Install.

Windows XP/2000 Users: When the Driver Signature Notice window

appears, click OK.

Step 3 When prompted, plug your Bluetooth USB adapter into an available

USB port on your computer and click OK.

Please wait while the software installs all the supported services. This may take
several minutes.

Windows 2000/ME Users: You may be prompted to restart your computer a

few times during the installation. Ignore the prompts until the installation is
complete.

Step 4 At the end, click Finish to complete the installation.

Windows 2000/ME Users: At the end of the installation, you will be prompted

to restart your computer. Click OK to restart.
The Initial Bluetooth Configuration Wizard will automatically launch to guide

you through the initial configuration.

Step 5 Click Next at the Initial Bluetooth Configuration Wizard screen.

Step 6 Enter a unique name to identify your computer and select a computer

type, then click Next.