Airgoon WK 8800 Users Manual

h

November 17

Airgoon L TD.

t

2011

2207 Concord Pike Unit 700

Wilmington, DE 19803-2908
PH: [phone] FAX: [phone]

Model: Airgoon Air-Lock WK 8800

Wireless Network Stabilizer Module

Introduction Manual.

The Airgoon Air-Lock WK 8800 Wireless Network Stabilizer Module is the world’s only
Intelligent Network Stabilizer Module for simple plug and play operation. It is the only module on
the market today that will exceed the specifications of today and beyond current 4G protocols. The
Airgoon Air-Lock WK 8800 Wireless Network Stabilizer Module has been engineered to keep pace
with the Network Operator’s future developments in technologies thereby removing the fear of
obsolescence. Built in a compact package size just measuring (LxWxH) 50.8 mm. x 50.8 mm. x 12.7
mm., it provides for a simple integration or along side other devices. The Airgoon Air-Lock WK
8800 Wireless Network Stabilizer has been designed and manufactured for enhancing, extending or
maintaining a constant signal for better performance without impacting the Carrier’s Networks. The
Air Lock WK 8800 is available for use on all 850/1900 MHz networks with the following: 700 MHz,
1700 MHz, 2100 MHz and 2.5 GHz. Frequency Bands being released in the Q1 2012.

FCC/IC Regulatory Information Important notice

We, Airgoon LTD 2207 Concord Pike, Suite 700, Wilmington, Delaware 19803 declare that
the Airgoon Air-Lock WK 8800 Wireless Network Stabilizer Module complies with Parts 22H and
24E of the FCC CFR47 Rules. Operation is subject to the following two conditions: This device may
not cause harmful interference, and this device must accept any interference received, including
interference that may cause undesired operation.

Because of the nature of wireless communications, transmission and reception of data can
never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although
significant delays or losses of data are rare but they do occur when wireless devices such as the
Airgoon Air-Lock WK 8800 Wireless Network Stabilizer Module are used. The Airgoon Air-Lock
WK 8800 Wireless Network Stabilizer Module should not be used in situations where failure to
transmit or receive data could result in damage of any kind to the user or any other party, including
but not limited to personal injury, death, or loss of property. Airgoon and its affiliates accepts no
responsibility for damages of any kind resulting from delays or errors in data transmitted or received
using The Airgoon Air-Lock WK 8800 Wireless Network Stabilizer Module Network Stabilizer, or
for failure of the Airgoon Air-Lock WK 8800 Wireless Network Stabilizer Module to transmit or
receive such data.

Confidential and Proprietary Information “Not to be Disseminated”.

Page 1 of 5

.

Forever Evolving Today’s Technologies

h

November 17

Airgoon L TD.

t

2011

2207 Concord Pike Unit 700

Wilmington, DE 19803-2908
PH: [phone] FAX: [phone]

Model: Airgoon Air-Lock WK 8800

Wireless Network Stabilizer Module

The Airgoon Air-Lock WK 8800 Wireless Network Stabilizer Module has been granted
approval for mobile and fixed applications. If using the Airgoon Air-Lock WK 8800 Wireless
Network Stabilizer Module within other products additional FCC/IC (Industry Canada) certification
may or may not be needed if they meet the following conditions; In a mobile environment at least

25.4 cm separation distance between the outdoor antenna and the user’s body and at least 20.32 cm
separation between the antenna and the user’s body must be maintained at all times. In a building
structure environment at least 50.8cm separation distance between the outdoor antenna and the user’s
body and at least 38.1 cm separation distance between the outdoor antenna and the user’s body must
be maintained at all times. When using the Airgoon Air-Lock WK 8800 Wireless Network Stabilizer
Module, use of any antenna gain higher than 15.12 dBi using is in violation of FCC regulations, for
which the offender is fully liable.

Failure of the end-user to comply with the applicable requirements may result in the unlawful
operation and adverse action against the end-user by the applicable National Regulatory Authority.
This product does not contain any user serviceable components and is to be used with approved
antennas only. Any product changes or modifications will invalidate all Applicable Regulatory
Certifications and Approvals.

If using the Airgoon Air-Lock WK 8800 Wireless Network Stabilizer Module within another
device a label must be affixed to the outside of the end product into which is incorporated, with a
statement similar to the following: This device contains FCC ID: --------- and IC ID: ---------- The
Airgoon Air-Lock WK 8800 Wireless Network Stabilizer Module ID: IC------- where ID: IC------- is
the Airgoon Network Stabilizer’s certification number.

A user manual with the end product must clearly indicate the operating requirements and
conditions that must be observed to ensure compliance with current FCC / IC RF Exposure
Guidelines. The end product with an the Airgoon Air-Lock WK 8800 Wireless Network Stabilizer
Module may also need to pass the FCC Parts 22H and 24E Unintentional Emission Testing
Requirements and be properly authorized by the FCC.

Confidential and Proprietary Information “Not to be Disseminated”.

Page 2 of 5.

Forever Evolving Today’s Technologies