Aircrow BR-232A, BR-201A User Manual

INTRODUCTION TO AIRCROW

MAINTENANCE AND STORAGE

“The First Scarecrow with Brains”

OWNER’S MANUAL

Little Crow: Model BR-201A(AC) Blower

Black Bird: Model BR-232A(AC) Blower

PLEASE READ AND SAVE THESE INSTRUCTION

• INTRODUCTION TO
AIRCROW

• OPERATION/USE

• MAINTENANCE AND STORAGE

• SAFETY

• WARRANTY

• SERVICE

• AIRCROW BLOWERS

LIMITED WARRANTY

• WARNING

• CONTACT INFORMATION

• SPECIFICATIONS

• TROUBLESHOOTING

• ASSEMBLY INSTRUCTIONS

AirCrow is a trademark of AirCrow, LLC which operates under United States Patent Pending provisions.

Our invention provides a proven efficient method of harmlessly frightening away unwanted pests, thus
preventing them from invading or inhabiting an area such as a garden, an orchard, fruit trees, or other such
crops. The unpredictable and erratic life-like movement of the inflatable encourages the pests to seek some
other place to feed and rest.

Your new AirCrow blower has a high efficiency motor with state of the art construction for both safety and long
life. The conveniently placed handle is designed for easy carrying from one target area to another. Additional
stability can be obtained by simply tapping in the plastic ground stakes provided with your AirCrow blower.

Your pest deterrent inflatables for the Little Crow BR201(AC) or Black Bird BR232(AC) AirCrow blowers are
enclosed.

THIS IS NOT A TOY.

OPERATION/USE

This blower is intended to be used only with AirCrow inflatable structures and any other use will void
the warranty.

1) With the unit unplugged, carefully place the AirCrow unit on stable, flat, and dry surface.

2) Securely attach the red elbow adapter with the screws and bolts provided but do not over tighten.

3) Snugly attach your AirCrow inflatable tube around the exhaust opening by stretching open the elastic strap.
The elastic ring should firmly rest in the recessed area. Do not cover past the retaining ledge.

4) Place the blower well away from any flammable material.

5) Plug the cord into a grounded G.F.C.I. outlet only.

6) Place your AirCrow device in close proximity to the area you desire to protect.

7) Turn on the switch to make sure the blower is operating correctly and the inflatable functions properly,
taking care to stand clear of the moving inflatable.

8) Reposition the blower as necessary so the inflatable does not strike any limbs, foliage, or fruit. Once you are
satisfied with the position, with the blower in off mode, you can stake it securely into the ground. It is
recommended that you frequently relocate the position of the AirCrow blower in order to maximize its effect
on the pursuing pest. The inflatable will stay cleaner if a tarp is laid down first (not provided).

9) Use of our accessory timer will enhance performance and could extend the useful life of the motor and
inflatable (not provided).

1. Store unit indoors in a clean, dry environment to ensure long life for both the blower and the inflatable.

2. To keep the Blower clean, you can use a dry cloth or a cloth moistened with a neutral solution or water
to wipe the surface of the Blower.

3. Never clean the Blower by spraying with water.

4. Unplug and store in a dry indoor place unreachable for children when not in use.

5. Periodically remove the attached red elbow and remove any debris that could restrict the air passage.

SAFETY

1)

Never place the AirCrow device in close proximity to any heat source or open flame. The inflatable is
flammable and could cause a fire and serious injury if not handled properly.

2)

Do not operate the blower without the inflatable attached because the blower must have back pressure in
order to avoid any damage to the motor.

3)

Keep children away from the unit at all times while in operation and/or plugged in. This product is not a
toy and should only be used for its intended purpose.

4)

Do not put fingers or other objects in any part of the unit while it is in operation and/or plugged in.

5)

Do not operate in pooled or accumulated water to avoid electric shock.

6)

To prevent electric shock, do not drop unit into water, never plug in or unplug the appliance with wet hands
or while standing in water.

7)

Avoid sands, small rocks and other small objects being sucked in the Blower.

8)

To avoid risk of injury, do not direct stream of air at face or body.

9)

Outdoor use: while the blower is being operated outdoors, it must be plugged into a grounded
G.F.C.I. outlet only. The motor must be kept dry at all times. If the unit becomes wet, turn the electricity

off and with the blower in the off position, thoroughly dry the unit before the next operation.

10)

Indoor use: use only with a grounded plug.

11)

Never use a cord that has cuts, breaks, or any other apparent damage as harmful, electrical shock may occur.

12)

If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.

13)

Make sure the power source is sufficient to meet the requirements of the blower (see specifications).

14)

Keep air intakes and exhausts clean at all times to avoid clogging or blocking in order to prevent
overheating the unit. Blocking the air intake could result in a fire or electrical hazards.

15)

To prevent injury to persons and to avoid objects from coming in contact with the blower wheel, do not
remove any screens or safety guards from this unit. Damage in this manner will void your warranty.

16)

Do not operate the unit close to any dangerous areas such as explosive gases, flammables, heaters and
unventilated environments that may result in explosions or electrical hazards.
Do not use any form of speed control device as doing so will void your warranty and may risk injury

17）

or fire.
Always place the blower on a smooth and level surface for safe operation.

18)
Frequently clean any debris from the intake and exhaust ports of the blower when the unit is unplugged

19)
and in the off position.
Do not use unit if defective or damaged.

20)
Unplug the unit before performing any maintenance, cleaning, or servicing.

21)
The blower and inflatable in operation must be supervised at all times.

22)

Any misuse or abuse of

23)

this product will void the warranty.

2

3

WARRANTY

BLOWER:

6 MONTHS from the original purchase date, we will cover, free of charge, all parts (except cords) and labor by

either replacing or repairing. We provide one-way shipping to your location in the 48 contiguous United States
using parcel ground service. Customer will pay shipping to our warehouse. Canada and non-contiguous states
must pay for freight both ways. When shipping internationally, buyer is responsible for any duties, customs, or
other fees.

INFLATABLE:

We will cover, free of charge, any manufacturer defects prior to use. We do not cover any wear from usage.
We provide one-way shipping to your location in the 48 contiguous United States using parcel ground service.
Customer will pay shipping to our warehouse. Canada and non-contiguous states must pay for freight both
ways. When shipping internationally, buyer is responsible for any duties, customs, or other fees.

.

SERVICE

In order to receive service or replacement parts under warranty, you must:

1) Contact us before the warranty has expired,

2) Call for return merchandise authorization number,

3) Provide original, legible proof of purchase, and

4) Ship to:

AirCrow, LLC
647 W. Prien Lake Rd.
Lake Charles, LA 70601

AIRCROW BLOWERS LIMITED WARRANTY

COVERS:

AirCrow blowers are covered for 6 months from the original date of purchase against defects in material and
craftsmanship when operated under normal intended use.

WARNING

The use of a 3-prong to 2-prong adapter is strictly prohibited. Once the unit is turned on, you must stand
completely out of the inflatable’s reach as it may cause bodil

y harm.

CONTACT INFORMATION

AirCrow, LLC
647 W. Prien Lake Rd.
Lake Charles, LA 70601

Phone: [phone] or [phone]
Fax: [phone]
E-mail: [e-mail]
Website: www.aircrow.com

SPECIFICATIONS

AIRCROW BLOWERS SPECIFICATIONS

Model BR-201A(AC) BR-232A(AC)

Voltage 120V 120V

Max Air Volume 250CFM 600CFM

Amps with back

Max Static Pressure 5" 6.75"

Unit Size (LxWxH)18"x8.7"x13.6" 20.4"x10.2"x16.8”

Wheel Speed (RPM) 3200 3200

pressure

Weight Net/Gr 9.3 Lbs/11.1 Lbs 13.5 Lbs/15.7Lbs

Motor 1/4 HP 1/2 HP

Attached Cord

6Ft / 18AWG

2.2A 5.5A

6Ft / 18AWG

TROUBLESHOOTING

Problem Possible Cause Soluon

a) Switch is OFF a) Turn switch ON

Motor Not Running

Scraping Noise From Blower

Weak Air Flow a) Obstructed vents/inlets a) Clean out vents/inlets

b) Bad outlet

c) Faulty switch/cord c) Replace switch or cord

a) Check for obstrucon entering
through the intake or exhaust

b) Check for any pressure against

blower housing

BLOWER ELBOW ADAPTER AND BASE ASSEMBLY INSTRUCTIONS

Using the 5 screws provided
attach elbow adapter on
outlet of blower

b) Check outlet/change to another

outlet

a) Remove obstrucon

b) Remove any pressure

AIRCROW DOES NOT COVER OR WARRANTY:

• Any signs of misuse including, but not limited to, abusive handling, tampering, improper voltage use, and/or

unauthorized maintenance and repairs.

• The inflatable portion of the device except for manufacture defects prior to use.

1) Align blower to inserts of base and lock into place

2) Insert the stakes into the holes of base

4

5

Completed with inflatable

6