MAINTENANCE
DANGER: Unplug power cord before any cleaning operation is started.
For diaphragm replacement, disassemble top part of the Pump Head. Then
unscrew the diaphragm and install the new diaphragm. Reassemble the
Pump Head. It is good practice to replace the Pump Head when the
diaphragm is replaced. This ensures new, clean valves and maximum performance. Dirty valves will reduce performance.
Do not disassemble the pump housing from the motor. Proper assembly
(factory-adjusted) is critical for proper pump performance.
Keep the pump enclosure clean by using a mild detergent solution. Never
immerse nor use excessive fluid when cleaning the pump.
PUMP HEAD REPLACEMENT PARTS LIST
Item Part No.
Service Kit (Nitrile diaphragm, two retainers, 07530-06
two valves and plastic head)
Service Kit (FLUOREL®diaphragm, two retainers, 07530-04
two valves and plastic head)
Eccentric Assembly (eccentric and bearing) 07530-75
Set Screw for Eccentric Assembly B-1079-0121
Diaphragm Clamp B-1352-0012
NOTE:
When rebuilding both heads order two each of the required part.
SPECIAL APPLICATIONS
Technical information and advice concerning the use of this product in specific applications may be obtained from our Engineering Department. If volume justifies, modifications can be made to adapt the unit to special customer applications. OEM inquiries are welcome and encouraged.
112
EU Declaration of Conformity
Name of Apparatus: AIR CADET®Dual Head
Vacuum/Pressure Pump
Model Number: 07530-65
Description of Apparatus: Dual Head Vacuum/Pressure Pump
Barnant Company declares that the above model is in conformity
to the following harmonized standards and directives:
Applicable Applicable Manufacturer’s
Directives Specifications Report Number
73/23/EEC EN61010-1/A2:1995 TR9528
93/68/EEC
89/336/EEC EN61326-1/A1:1998 TR9529
92/31/EEC
93/68/EEC
The last two digits of the year in which the current configuration
of the above model was assessed per the Low Voltage Directive
is: 00.
Manufacturer: Barnant Company Division
Cole-Parmer Instrument Company
28W092 Commercial Avenue
Barrington, IL 60010-2392
USA
Tel.: 847-381-7050
Manufacturer’s
Signature: 27 October, 2000
Larry Jones Date
Vice President, Engineering