Airbase By EMAX B2339161, B2339160 User Manual
SMART OIL - Whisper Blue Synthetic
Air Cooled Engine Oil
Safety Data Sheet
According to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2019
EN (English
Page 1 of 8
SECTION 1: IDENTIFICATION
1.1. Product Identifier
Product Form: Mixture
Product Name: Smart Oil – Whisper Blue Synthetic Air-Cooled Engine Oil Product Grades: 5W-30
Synonyms: 4 Stroke Engine Oil
1.2. Intended Use of the Product: Air Cooled 4 Stroke Engine Oil
1.3. Name, Address, and Telephone of the Responsible Party
Company:
AIRBASE Industries
1000 Cass Drive
Clayton, OH 45315
(937) 540-1140
www.EatonCompressor.com
1.4. Emergency Telephone Number
Emergency Number : 1-800-424-9300, CHEMTREC
SECTION 2: HAZARDS IDENTIFICATION
2.1. Classification of the Substance or Mixture
Classification (GHS-US)
Not Classified
Full text of H-phrases: see section 16
2.2. Label Elements
GHS-US Labeling
Hazard Pictograms (GHS-US)
:
Not Classified
Signal Word (GHS-US)
:
Hazard Statements (GHS-US)
:
None Required
Precautionary Statements (GHS-US)
:
P273 - Avoid release to the environment.
P501 - Dispose of contents/container in accordance with local, regional, national, and
international regulations.
2.3. Other Hazards
The mixture consists of substances capable of producing an aspiration hazard. Aspiration may result in chemical pneumonia (fluid
in the lungs), severe lung damage, respiratory failure, and even death.
2.4. Unknown Acute Toxicity (GHS-US)
None of the mixture consists of ingredient(s) of unknown acute toxicity.
SMART OIL - Whisper Blue Synthetic
Air Cooled Engine Oil
Safety Data Sheet
According to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2019
EN (English
Page 2 of 8
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.1. Substances
Not applicable
3.2. Mixture
Name
Product Identifier
% (w/w)
Classification (GHS-US)
Petroleum distillates, solvent dewaxed
(CAS No) 64742-65-0
75.75 – 95,
64 - 85
Not Classified
heavy paraffinic, Distillates, petroleum,
hydrotreated heavy paraffinic
(CAS No) 64742-54-7
0 – 11,
10 - 17
Not Classified
Paraffin oils*
(CAS No) 8012-95-1
0 - 0.1,
0.1- 1,
1 - 5
Not Classified
Phosphorodithioic acid, O, O-di-C1-14-alkyl
esters, zinc salts
(CAS No) 68649-42-3
0.45 -
0.891
Aquatic Chronic 3, H402
*The specific chemical identity and/or exact percentage of composition have been withheld as a trade secret within the meaning of
the OSHA Hazard Communication Standard [29 CFR 1910.1200].
*More than one of the ranges of concentration prescribed by Controlled Products Regulations has been used where necessary, due to
varying composition.
Full text of H-phrases: see section 16
SECTION 4: FIRST AID MEASURES
4.1. Description of First Aid Measures
General: Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label if possible).
Inhalation: Remove to fresh air and keep at rest in a position comfortable for breathing. Obtain medical attention if breathing
difficulty persists.
Skin Contact: Remove contaminated clothing. Drench affected area with water or soap and water for at least 15 minutes. Wash
contaminated clothing before reuse. Obtain medical attention if irritation develops or persists.
Eye Contact: Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Obtain medical attention.
Ingestion: Do NOT induce vomiting. Rinse mouth. Immediately call a POISON CENTER or doctor/physician.
4.2. Most Important Symptoms and Effects Both Acute and Delayed
General: No known significant effects or critical hazards.
Inhalation: Overexposure may be irritating to the respiratory system.
Skin Contact: Repeated or prolonged skin contact may cause irritation.
Eye Contact: Direct contact with the eyes is likely irritating.
Ingestion: Ingestion is likely to be harmful or have adverse effects.
Chronic Symptoms: No known significant effects or critical hazards.
4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed
If you feel unwell, seek medical advice (show the label where possible).
SECTION 5: FIRE-FIGHTING MEASURES
5.1. Extinguishing Media
Suitable Extinguishing Media: Use extinguishing media appropriate for surrounding fire.
Unsuitable Extinguishing Media: Do not use a heavy water stream. Use of heavy stream of water may spread fire.
5.2. Special Hazards Arising from the Substance or Mixture
Fire Hazard: Not flammable but will support combustion.
Explosion Hazard: Product is not explosive.
Reactivity: Hazardous reactions will not occur under normal conditions.
SMART OIL - Whisper Blue Synthetic
Air Cooled Engine Oil
Safety Data Sheet
According to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2019
EN (English
Page 3 of 8
5.3. Advice for Firefighters
Precautionary Measures Fire: Exercise caution when fighting any chemical fire. Under fire conditions, hazardous fumes will be
present.
Firefighting Instructions: Use water spray or fog for cooling exposed containers.
Protection During Firefighting: Do not enter fire area without proper protective equipment, including respiratory protection.
Hazardous Combustion Products: Under fire conditions, may produce fumes, smoke, oxides of carbon and hydrocarbons.
Other Information: Refer to Section 9 for flammability properties.
Reference to Other Sections
Refer to section 9 for flammability properties.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1. Personal Precautions, Protective Equipment and Emergency Procedures
General Measures: Avoid all contact with skin, eyes, or clothing. Avoid breathing (vapor, mist, spray).
6.1.1. For Non-Emergency Personnel
Protective Equipment: Use appropriate personal protection equipment (PPE).
Emergency Procedures: Evacuate unnecessary personnel.
6.1.2. For Emergency Personnel
Protective Equipment: Equip cleanup crew with proper protection.
Emergency Procedures: Stop leak if safe to do so. Eliminate ignition sources. Ventilate area.
6.2. Environmental Precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and Material for Containment and Cleaning Up
For Containment: Contain any spills with dikes or absorbents to prevent migration and entry into sewers or streams.
Methods for Cleaning Up: Clean up spills immediately and dispose of waste safely. Spills should be contained with mechanical
barriers. Transfer spilled material to a suitable container for disposal. Contact competent authorities after a spill.
6.4. Reference to Other Sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: HANDLING AND STORAGE
7.1. Precautions for Safe Handling
Additional Hazards When Processed: Any proposed use of this product in elevated-temperature processes should be thoroughly
evaluated to assure that safe operating conditions are established and maintained. Practice good housekeeping - spillage can be
slippery on smooth surface either wet or dry.
Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas
with mild soap and water before eating, drinking or smoking and when leaving work.
7.2. Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures: Comply with applicable regulations.
Storage Conditions: Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Keep/Store away from
direct sunlight, extremely high or low temperatures and incompatible materials.
Incompatible Materials: Strong acids, strong bases, strong oxidizers.
7.3. Specific End Use(s)
Engine Oil .
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control Parameters
For substances listed in section 3 that are not listed here, there are no established Exposure limits from the manufacturer, supplier,
importer, or the appropriate advisory agency including: ACGIH (TLV), NIOSH (REL), OSHA (PEL), Canadian provincial governments, or
the Mexican government.
Loading...