Installation Instructions
Part Number 860-348
Airaid Premium Filter
2008-10 Ford F-250 Thru
F-550 SuperDuty
Powerstroke 6.4L
Parts List
#1 Airaid Premium Filter x1
Thank you for purchasing an Airaid Premium Filter. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00
PM MST weekdays for questions regarding fit or instructio ns that are not clear to you. Your Airaid Premium Filter was carefully inspected and packaged. The air filter element is protected from direct exposure to water and
debris, care should be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILTY! The air filter is reusable and should be cleaned using the Airaid Filter Tune-Up Kit periodically.
Thank you for selecting AIRAID.
1. Unlatch the two factory clips on each side of the
airbox and then remove the airbox lid.
2. Remove the factory air filter by gently prying it
towards the passenger side of the airbox, and then
lifting it straight up.
Sealing Edge
3. Insert the Airaid Premium Filter (#1) into the
factory airbox.
Step
0
5. Locate the “step” on the bottom of the factory
airbox. Make sure that the tab on the air filter is
aligned with it. Next, align the two side tabs on the
air filter with the side of the factory airbox.
7. Double check your work!
0
0
0
4. Firmly press the air filter into the factory airbox.
Make sure that the sealing edge is fully seated and
flush with the edge all the way around the airbox.
0
0
0
0
0
0
6. Reinstall the factory airbox lid and re-latch the
two factory clips.
Contact your nearest Airaid dealer for an Airaid Intake System for your car, truck or SUV.
Don’t Forget Your AIRAID Filter Tune-Up Kit!
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
Instructions Revision
01/07/10
Loading...