Airaid 520-605 Installation Instructions

# 520-605 INSTALLATION INSTRUCTIONS

05-15 Nissan Frontier/Xterra

05-12 Nissan Pathfinder

2009-12 Suzuki Equator

4.0L V6

Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully before proceeding with the installation. Contact AIRAID @
[phone] 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or in­structions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully
inspected and packaged. Check that no parts are missing, or were damaged during
shipping. If any parts are missing, please contact AIRAID.

Thank you for selecting AIRAID.

Parts List

(1) Power Plate

(1) O-Ring

(4) 6mm x 70mm Hex Bolts

(4) 6mm Flat Washers

(2) Extension Plates

(2) 6mm x 16mm Flathead Screws

Also available for your 2005-10 Nissan Frontier,

and 2009-10 Suzuki Equator, the AIRAID Intake

System p/n 520-188. Please call for details!

Tools List

5/32” Allen Wrench

8mm Socket

Standard Screwdriver

1

Installation Instructions. Read Me!

1. DISCONNECT NEGATIVE (-) BATTERY CABLE.

2. Remove throttle body air intake system.

3. Remove (4) bolts from the throttle body. (Ref. “A”)

4. Install power plate using (4) 6mm bolts and (4) 6mm washers. (Ref. “B”)
* Note: Install the ‘O’-ring in the power plate and face towards the throttle body.

5. Install (2) extension plates. (Ref. “C”)

6. Inspect & Test the throttle linkage for full open & closed travel before driving. Some cruise or kickdown ca-

bles may require adjustment. Please refer to your vehicles service manual for proper adjusting.

7. Reinstall air intake system using (Step 2) as an example.

8. Reinstall negative battery cable. Enjoy!

The sound of power...The “whistle” means its working!

Ref. “A”- (1) Power Plate
(1) O-ring

Ref. “B”- (4) 6mm x 70mm Hex Bolts
(4) 6mm Flat Washers

Ref. “C”- (2) Extension Plates
(2) 6mm x 16mm Flathead Screws

AIRAID Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 [phone] [e-mail] www.airaid.com

2

Rev 02.13.15