Airaid 350-319 Installation Instructions

Installation Instructions

For Part Numbers:

350-319 720-127 Airaid Oiled Media Filter
351-319 721-127 SynthaMax Dry Media Filter - Red
352-319 722-127 SynthaMax Dry Media Filter - Black
353-319 723-127 SynthaMax Dry Media Filter - Blue

2011-14 Dodge Challenger
2011-14 Dodge Charger
2011-14 Chrysler 300

6.4L V8

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Cool Air Box 1

4. Filter Adapter 1

5. Weatherstrip 1

6. ¼"-20 Button Head Screw 3

7. ¼" Flat Washer 3

8. 5/16" Flat Washer 1

9. ⅜"-Button Head Screw 1
10 ⅜"-Well Nut 1

11. #18 Speed Clamp 1

12. #24 Speed Clamp 2

13. ¾" Barbed Elbow 1

14. #56 Hose Clamp 1

15. #72 Hose Clamp 1

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1. Disconnect the negative battery terminal, located in
the trunk, by the spare tire.

4. Install the Filter Adapter onto the Cool Air Box using
the three ¼” Button Head Screws and ¼" Flat Washers.

2. Disconnect the air temperature sensor. Loosen the
throttle body clamp on the factory intake tube.

5. Set the Well Nut into the hole in the inner fender. 6. Lower the Air Box assembly down into the inner fend-

3. Separate the crankcase breather from the air box lid

and remove the air box screw in the core support. lift the
air box / tube assembly out of the vehicle and set the
screw aside, it will be reused in step 6.

er. Align the bolt holes and secure the Air Box using the
screw removed in step 3 and the 3/8” Button Head Screw
with the 5/16” Flat Washer.

7. Insert the Barbed Elbow Connector into the Airaid
Intake Tube as shown.

8. Transfer the air temperature sensor from the factory
intake tube into the Airaid Intake Tube.

#56 Clamp

#72 Clamp

9. Place the #56 and #72 Hose Clamps onto the Airaid

Intake Tube and Install the assembly leaving the hose
clamps loose for now.

#24 Speed Clamps

#18 Speed Clamp

10. Reconnect the air temperature sensor, and the crank-

case breather tube to the Barbed Elbow .

13. Install the Weatherstrip onto the top edge of the Air
Box with the contour rolling away from the Filter. Re­connect the negative terminal on the battery.

11. Secure the crankcase breather tube and air tempera­ture sensor using two #24 Speed Clamps. Secure the
Barbed Elbow using the #18 Speed Clamp. Tighten the
Intake Tube Hose Clamps at this time.

14. Double check your work.

12. Install the Airaid Premium Filter onto the Filter

Adapter.

Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and
screws are tight. Double check the hood clearance!

Thank you for purchasing the Airaid Intake System. Contact Airaid @ [phone] 8:00 AM - 5:00 PM MST weekdays for questions
regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and packaged. Check that no parts are
missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air filter element is protected from direct exposure to wa­ter and debris; care should be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter
is reusable and should be cleaned periodically.

FILTER IDENTIFICATION

720-127 Airaid Oiled Media 721-127 Airaid SynthaMax Dry Media - Red
722-127 Airaid SynthaMax Dry Media - Black 723-127 Airaid SynthaMax Dry Media - Blue

For your Oiled media filter

we suggest using the AIRAID

Filter Tune-Up Kit!

P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray

Synthamax Air Filters do not require
oil. Service air filter as needed by
cleaning with common non-petroleum
all-purpose household cleaner and wa­ter. Simple Green®, Formula 409® or
equivalent works great. Apply cleaner
to outside of air filter and allow to soak.
Then flush filter clean from the inside
out with a garden hose and repeat steps
if necessary. Do not apply high pres­sure water or air to clean filter. Allow
filter to air dry and reinstall.

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 [phone] [e-mail] www.airaid.com

REV.04.01.14