Airaid 200-557 Installation Instructions

# 200-557 INSTALLATION INSTRUCTIONS

2001-04 Chevy/GMC Duramax Diesel 6.6L

* Please Note: 2004 Duramax: VIN Eighth Digit ‘1’, fits LB7 engine only

Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully bef ore proceeding with the installation. Cont ac t AIRAID @
[phone] 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or in­structions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully
inspected and packaged. Check that no parts are missing, or were damaged during
shipping. If any parts are missing, please contact AIRAID.

Thank you for selecting AIRAID.

Parts List

(1) Power Plate

* Also for your Chevrolet Duramax

Diesel– The Airaid Intake System.

Call for details!

Tools List

7/16 Socket

Ratchet

1

Installation Instructions. Read Me!

* Please Note: 2004 Duramax: VIN Eighth Digit ‘1’, fits LB7 engine only

1. DISCONNECT NEGATIVE (-) BATTERY CABLE.

2. Loosen hose clamps and slide off hose onto intake manifold and formed intake tube.
* Note: use 7/16 socket to remove hose clamps. (Ref. B & C)

3. Remove hose and install power plate (Ref. A) using illustration (Ref. D) for air direction.
* Note: Use a small amount of grease inside hose to install power plate. The edge of

the air “IN” of the power plate should be approximately 1” from end of hose.

4. Reinstall the hose power plate assembly and slide clamps to location. (Reverse of Step 2)

5. Before tightening hose clamps, be sure that power plate has engaged both intake mani-

fold and formed intake tube.

The sound of power...The “whistle” means its working!

Ref. “D”-

Ref. “A”- Power Plate

Ref. “C”

- Hose Clamp Assembly

Ref. “B”- Formed Intake Tube

Rev. 08-26-09

AIRAID Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 [phone] [e-mail] www.airaid.com

2