Airaid 1027 User Manual

Part Number 1027

2010-15 4Runner 4.0L
2010-14 FJ Cruiser 4.0L
2010-13 Sienna 3.5L
2007-14 Avalon 3.5L
2006-14 Camry 3.5L
2013-14 Camry 2.5 L Hybrid
2003-15 Venza 3.5L
2013 Rav4 3.5L
2013 –15 Highlander 3.5L

Tools Required For Installation

8mm, 10mm Sockets

Ratchet and Extension

Phillips Screwdriver

#1 ECONOAID x1
#2 Gasket x1

Thank you for purchasing the ECONOAID Throttlebody Booster. Please read the instruction manual carefully before pro­ceeding with the installation. Contact ECONOAID @ [phone] 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit
or instructions that are not clear to you. Your ECONOAID Throttlebody Booster was carefully inspected and packaged. Check that
no parts are missing, or were damaged during shipping. If any parts are missing, please contact ECONOAID.

Parts List

U.S. Pat. #7,665,442

These instructions depict an installation being performed on a FJ Cruiser and is meant to be a guide
for all other makes and models listed. While specific details may vary from vehicle to vehicle, the general
install procedure remains the same.

1. Locate and loosen the intake tube clamps on both the throt­tlebody and the airbox. Remove the factory intake tube and
set it aside. It may be necessary to remove the engine cover to
gain access to the throttlebody on some applications.

3. Remove the four bolts that secure the throttlebody to the
intake manifold. It may also be necessary to remove a wiring
bracket depending on your application.

4. Pull the throttlebody away from the intake manifold and
Install the ECONOAID Throttle Booster and supplied gasket.
The logo is to be facing the throttlebody and in the 12:00
o’clock position. the supplied gasket, is to be on the throttle­body side of the ECONOAID.

5. Align the bolt holes, and reinstall the factory bolts. Tighten
the bolts to the factory specifications in an “X” pattern. Before
starting the engine, manually cycle the throttle plate to make
sure there are no obstructions.

5. Reinstall the intake tube, and any other parts that were re­moved to gain access to the throttlebody in the reverse order
in which they were removed.
Double check your work. Make sure there is no foreign mate­rial in the intake tract. Make sure all clamps, connectors, hos­es, nuts, and bolts are secure.

Instructions Revision

10.08.14

ECONOAID 2688 E Rose Garden Ln. Phoenix, AZ 85050 [phone] www.ECONOAID.com