Aiphone NFC-CARD, NFC-FOB Specsheet

APPLICATION NOTE

Aiphone Corporation | www.aiphone.com | [e-mail] | [phone]

GT Series

Use Aiphone Card (model NFC-CARD) or Fob (model NFC-FOB) for Access Control

NFC access cards (Type A & F, available from Aiphone) can be registered to the GT-DMB-N entrance station for door
entry. Up to 500 cards can be registered using the GT-DMB-N entrance station. The GT entrance station/system will not
track or log entry data for these cards. Follow the instructions below to register the NFC card(s).

Programming

Step 1: On the keypad, Push # then

enter the programming
passcode (default ✳1111)

Step 2: Re-enter the programming
passcode (default ✳1111)

Step 3: Use the down arrow button to
scroll to STATION SETTINGS.
Push the Bell button to select.

ENTER PASSCODE

PASSCODE

X

IN USE

AIPHONE

CANCEL

GT-DMB-N

Step 4: Push the Bell button to select
ACCESS CODE.

STATION SETTINGS

ACCESS CODE

TIMER SETTINGS

GUIDE LANGUAGE

SCREEN SETTINGS

ENTER

AIPHONE

GT-DMB-N

BACK

IN USE

➢
➢

X

RE-ENTER CODE

PASSCODE

X

IN USE

AIPHONE

CANCEL

GT-DMB-N

Step 5: Use the down arrow button
to scroll to NFC CARD. Push the
Bell button to select.

ACCESS CODE

NUMBER INPUT

NFC CARD

➢

➢

ENTER

AIPHONE

GT-DMB-N

BACK

X

IN USE

MENU

Ver. 1.00

STATION SETTINGS
OTHER SETTINGS
QUIT

➢
➢

ENTER

AIPHONE

GT-DMB-N

IN USE

Step 6: Enter an access code (001-500)
and push the Bell button to
continue.

ACCESS CODE

ACCESS CODE #

001

INPUT: 001-500

ENTER

AIPHONE

GT-DMB-N

BACK

IN USE

➢

➢

X

Step 7: Hold an NFC card to the NFC
reader on the GT-DMB-N for a
few seconds (until code shows).

ACCESS CODE

TAP NFC CARD

Step 8: You will be asked if you want to
register. Push the Bell button
to save the registration.

ACCESS CODE

REGISTER?

- - - - - - 001

0427D5128D3280

CLEAR CODE

SAVE

AIPHONE

CANCEL

GT-DMB-N

IN USE

✳

X

SAVE

AIPHONE

CANCEL

GT-DMB-N

X

IN USE

NFC Reader

X

When done registering cards, push the Back

button three (3) times then use the down arrow button to scroll to Quit. Once highlighted,
push the Bell button to exit programming.
Note: The GT-DMB-N will exit programming after 60 seconds of inactivity.

For more details about the features and information above, please contact Technical Support.

Step 9: The NFC card is now registered.
Repeat steps 6-9 for additional
NFC cards.

ACCESS CODE

REGISTERED

0427D5128D3280

X

BACK

AIPHONE

GT-DMB-N

IN USE