Aiphone NE-NVP-RA INSTALLATION INSTRUCTIONS
NE-NVP-RA
Vandal Proof Sub Station for NEM System
Special
Order
Products
Requires surface mount box
SBX-NVP
ADA
Americans with
Disabilities Act
- INSTRUCTIONS -
The NE-NVP-RA sub station is vandal proof, and can be used with the NEM or the NEM-RS systems. Designed for
Rescue Assistance applications and ADA compliance, this unit features Emergency and Braille signage, a large red
call button, and "Call Placed" and "Help Coming" LED indicators. Remote indicators can be added for better
visibility of a station's status. A standard NEM master requires a manual reset button at each location, or the master
station can be equipped with a reset button (NEM-nRS version). The NE-NVP-RA is designed to be surfaced
mounted, requiring the SBX-NVP surface mount box. Tamper proof screws are provided, along with a wrench for
installation.
WIRING DIAGRAM FOR SYSTEM WITH CALL RESET AT THE MASTER
NEM-nRS Master Station Required
NEM-nRS Master
PS-2410A
or PS-24E
+
-
1
2
3
Use a designated
~
wire from each no.
terminal to sub
20
station's RED wire.
E
S
H
+
-
NE-NVP-RA
Red
Green
jumper
(Do not cut)
Blue
Purple
Black
Yellow
Orange
NE-NVP-RA
Red
Green
jumper
(Do not cut)
Blue
Purple
Black
Yellow
Orange
WIRING DIAGRAM FOR SYSTEM WITH OVERHEAD LAMPS AND A RESET BUTTON.
Standard NEM master used.
NE-NVP-RA
Red
Green
jumper
(Cut)
Blue
Purple
Black
Yellow
Orange
Blue
Blue
NAR-2A*
Blue
Blue
Blue
NBY-4A
"Call Activation" light
NBY-4A
"Help Coming" light
Blue
* Reset Button:
(Any normally closed button or
keyswitch. Not required when
using the NEM-RS master.)
PS-2410A
or PS-24E
+
-
NEM-n Master
1
2
3
Use a designated
~
wire from each no.
terminal to sub
20
station's RED wire.
E
S
H
+
-
Pg. 1
OPERATION:
1. When a sub station places a call, the "Call Placed" (Red) and "Help Coming" (Green) LEDs on the
sub station light.
2. When a call is answered, the red "Call Placed" LED on the sub turns off.
The green "Help Coming" LED stays on.
3. When the master station's reset button is pressed or if a remote reset switch is activated, all of the
call indicator lights will go off.
4. If overhead lamps are installed in the system, they will light in the same way that the LED's light,
as descirbed above.
BRAILLE SIGNAGE:
The NE-NVP-RA is equipped with Braille signage for the visually impaired.
ON TOP OF UNIT:
EMERGENCY
"EMERGENCY - CALL FOR HELP"
ON BOTTOM OF UNIT:
"PUSH BUTTON. TONE INDICATES CALL PLACED"
Plating material is .012" aluminum with 5 letter spacing.
SPECIFICATIONS:
Power Source: Supplied by master station
Speaker: 20 ohms, 3" diameter, water proof and puncture resistant, 2.5 oz. ceramic magnet
Call Button: Single pole, single throw (SPST), normally open (N/O)
Faceplate: 11 gauge carbon steel with powder-coated white baked epoxy finish
Call Annunciation: Pressing call button at sub latches call at NEM master until answered
Communication: Hands free at sub. Master is push-to-talk or VOX handset
Mounting Hardware: Tamper proof screws
Terminations: Color-coded prewired pigtails
Wiring: With remote reset switch: 4-conductor homerun from each sub, or 3 common wires plus 1
individual wire per sub station, looped.
With NEM-RS master: 4-conductor homerun from each sub, or 3 common wires plus 1
individual wire per sub station, looped.
Shielded wire is recommended.
Use Aiphone #822206 for homerun wiring, #822210 for up to 6 stations
on each run, or #822220 for up to 17 stations on each run.
Wiring Distance: 420' with 22AWG; 1,000' with 18AWG.
Dimensions (H x W x D):NE-NVP-RA alone: 7-1/2" x 5-1/2" x 2". With SBX-NVP: 8-5/8" x 6-5/8" x 2-1/4"
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
TECHNICAL SUPPORT E-MAIL:
tech-serv@aiphone.com
NE-NVP-RA Instr.
Pg. 2
0698bkjd
Loading...