Aiphone NEM-LD INSTALLATION INSTRUCTIONS
Special
Order
Products
NEM-LD
NEM Lamp Memory System for Long Distances and Elevators
NEM-n-LD Master Station
IF-DA-NLD and IE-JA-NLD Sub Stations
- INSTRUCTIONS -
The NEM Long Distance Lamp Memory System is designed for communication with remote
locations up to 4,000' away, or to each elevator in a building. Sub stations are available in
surface or flush mount styles, and require a separate circuit board (PC-359B) to be added for
the call-in function. Three wires are required to each sub station.
WIRING DIAGRAM:
PC-359B
1
2
IE-JA-NLD
1
2
2
3
4
5
Blk
Blk
6
7
3
7
NEM-20-LD
1
2
3
~
20
E
H
7
7
8
9
PS-2410A
or
PS-24E
+
-
Individual Components for NEM-LD System:
NEM-n-LD Master station (10, 20, 30, 40-station) for Long Distance
IE-JA-NLD Flush mount long distance sub with stainless steel cover
IF-DA-NLD Surface mount long distance sub, brown plastic
PC-359B Call holding circuit board for sub station, mounted externally
PS-2410A 24V DC Power Supply (for 10 and 20 station masters)
PS-24E 24V DC, 2A Power Supply (for 30 and 40 station masters)
IF-DA-NLD
1
2
Blk
Blk
WHT
Wire
Solder pads:
Numbered by
location on
board.
To Blk
To Blk
PC-359B
PC-359B (Solder side view)
1
2
2
To 1
To 2
3
4
1
2
2
3
4
5
6
7
7
7
7
8
9
5 6 7
9
8
7
7
7
SUB STATION MOUNTING: NEM-LD TERMINAL DEFINITIONS:
IE-JA-NLD: 2-gang electrical box + Positive 24V DC
- Negative
IF-DA-NLD:Surface mounts to 1-gang box 1~40 Station number
E Common communication
H Provides power to sub station
Pg. 1
OPERATION:
1. When a sub station places a call, the red channel LED indicator lights and a call tone rings at
the master. The tone and light will remain activated until the call is answered, which is the
primary function of the PC-359B. The LED indicator at the sub station will be lit from the time
the call is placed until it is answered.
2. If the master station is talking to another sub station, a new call from another sub station will
light the LED, but the call tone will not be heard.
3. When the call is answered, the LED on the master goes off. The person at the master uses
the push-to-talk, release-to-listen button, or picks up the handset to speak (with NEM-nA
masters). The LED at the sub station will go off when the master answers.
4. When the conversation is completed, the OFF button to the left of the station selector button
must be pressed to disengage the call.
SPECIFICATIONS:
Power Source: 24V DC at master. Use PS-2410A or PS-24E.
Communication Output: 500mW at 20 ohms
Communication: Push-to-talk, release-to-listen or VOX handset at master.
Hands free at sub station.
Calling: Master to sub: By voice only after pretone.
Sub to master: Call tone and LED, remaining activated until call is
answered.
Wiring: 2 common plus 1 individual per sub, looped; or 3 conductors homerun
to each sub. Shielded cable is recommended.
Use Aiphone #822203 for homerun wiring, #822206 for 4 stations
on each run, or #822210 for up to 8 stations on each run.
Wiring Distance: 2,000' with 22AWG; 4,000' with 18AWG.
Dimensions (H x W x D): IE-JA-NLD: 4-1/2" x 4-9/16" x 1-9/16"
IF-DA-NLD: 5-1/8" x 3-7/8" x 1-1/8"
TOLL FREE TECHNICAL SUPPORT:
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TECHNICAL SUPPORT E-MAIL:
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
NEM-LD
tech-serv@aiphone.com
Pg. 2
1098jd
Loading...