Aiphone MYW-CA User Manual

83070400 1092 @

® AlPHONE

PanTilt Separate Camera Adaptor

Model;

MYW-CA

(Camera adaptor)

INSTALLATION MANUAL

MYW-CA is a surface-mount box for attaching MY-CA PanTilt video door station inside, so that MY-CA can work as surveillance camera.

INSTALLATION — How to mount MY-CA into MYW-CA

1. Removing the MY-CA chassis;

Loosen the tamper-proof screw on front case, and remove the back frame. Unscrew at one point, and open the chassis. Pull off CN102 connector, and then reattach the chassis.

When reattaching the chassis, be careful that the weather-stripping

(string) should rest attached. MY-CA

INSIDE CHASSIS

-WEATHER STRIPPING

2. Connecting two leads to MY-CA;

Locate the MY-CA unit inside the MYW-CA box. Connect two black and white leads to AI, A2

terminals on MY-CA. Wiring is non-polarized. Attach back plate with all 6 screws securely.

WEATHER-STRIPPING

BACK FRAME

SCREW (6)— (supplied)

BACK PLATE

MY-CA

CAMERA UNIT

TAMPER-PROOF SCREW

MY-CA (without back frame)

COVER

CN102

Remove a seal on camera cover before mounting MY-CA. Be careful not to scratch the cover surface. To clean, use soft cloth.

3. Installing the MYW-CA unit;

This shows an installation example of MYW-CA camera unit, along with lE-JA audio door station, and DP-600Z motion detector.

At the entry (under the eaves)

MOTION DETECTOR DP-600Z (Instructions

furnished with DP-600Z)

Adjust MYW-CA direction with these 2 screws and the center hexagonal bolt.

WOOD SCREW (4)

INSIDE THE HOUSE

6-wire cable (approx. 1.5m/5‘ long)

BLUE YELLOW RED BROWN BLACK WHITE (Each pair wiring is non-polarized)

TERMINAL BOARD (locally available)

or WIRE NUTS

to; Main video monito!

!■ to; Audio door station

to; Motion detector

Mounting accessories;

Attach the mounting base with 4 wood screws, and the arm with hexagonal bolt.

WOOD SCREW (4)

The MYW-CA cable should be "U"-shaped to allow easy run off of water, etc.

AUDIO DOOR STATION

lE-JA

As shown, mount the MYW-CA unit to the hardware supplied. Provide a terminal board locally available, on which connect wires from main video monitor, motion detector & door station. Water-proof the junction parts of the cable, if exposed.

!ito

HEXAGONAL BOLT & WASHER

SCREW & WASHER (2)

and SCREW (6) for back plate

--------

WIRING DIAGRAM

33V22AWG)

(l) When motion detector and audio door station is not installed, have each BLACK/WHITE and RED/BROWN wires insulated. (D The locator LED is lit on the lE/IF door station, only when MYW-CA is working. IF-DA

To cut off the I.ED all the time, open the case and remove either lead from the PC board.

In MY-ICD system, use PS-18C/D power supply when DP-600Z is installed.

165722AWG)

ROOM STATION

PC BOARDS

LED lead

Image viewing area

SPECIFICATIONS

* Power source: Supplied by main room station. * Dimensions: * Weight: ApproK. 850g (1.87 lbs.) including mounting

* Max. distance to object:

* Image viewing area:

Opeationai notes;

In night time, pan-aiid-tilting operation may cause flickering on the monitor, but this is not a unit disorder. When the system with DP-600Z motion detector is powered on, it may happen that a call will be initiated by itself. Wait for approx. 15 seconds after powered on, as the system performance can be unstable.

Aiphone Co., Ltd., Nagoya, Japan Aiphone Corporation, Bellevue, WA, USA

HxWxD: 163 X 121 x52 (6-1/2" x 4-3/4" x 2”)

accessories It is suggested to locate the MYW-CA at approx.

3m/10’ distance to the viewing area, providing spotlighting illuminatin for the night.

At 3m/10' distance; 4.7m/16' vertically 8.4m/28' horizontally captured by pan-and-tilting operation.

* Vertical (tilting)

The outer angle is obtained when camera is pan-and-tilted, while the inner angle is for fixed camera position.

® AIPHONE

MYW-CA-I(E) 1092B

4.7m/16'

8.4m/28'

3m/10A

COMMUNICATION SYSTEMS

HOME BUSINESS INDUSTRY.

HOME. BUSINESS. INDUSTRY.

Printed in Japan (E)