Aiphone MYW-BA-M User Manual
Special
Order
Products
MYW-BA-M
Long Distance Video Adaptor For MY Monitors
- INSTRUCTIONS -
The MYW-BA-M adaptor extends the distance between the first and last monitor in an MY video entry
system to 1000 feet. Any video system using the MYH-CU or MYH-CUB sub monitors, along with an IE,
LEF, or TD-H audio intercom can be used. Aiphone cable #851602 is required for the video signal.
WIRING DIAGRAMS:
1. USING MY-CU and MYH-CU with IE or TD-H Audio:
(Audio system not shown)
MK-DAC*
A1
A2
MY-CU
1A1
1A2
Max. 500'
Aiphone
Wire #851602
B1
*VIDEO DOOR STATIONS:
Any Aiphone MK or MY Series video
door station can be used:
-MK-DAC: Surface mount, black
-MK-DBC: Semi-flush mount, black
-MK-DGC: Semi-flush mount, metal
cover
-MY-DGV: Semi-flush mount, vandal
proof, stainless steel cover
-MK-DS/B: Surface mount, fixed camera
Individual Components for System:
MYW-BA-M Long distance adaptor for MY monitors
MY-CU Master monitor, surface mount
MYH-CU Sub monitor, surface mount
MYH-CUB Sub monitor, flush mount
MYW-P1L Single camera adaptor for LEF system
MYW-P3L Three camera adaptor for LEF system
PS-1820UL 18V DC, 2A Power Supply
IE-1GD 1 Door, 4 Room master handset
IE-2AD 2 Door, 4 Room Master handset
IEH-1CD Sub handset for IE-1GD and IE-2AD
IE-8MD 2 Door, 6 Room master handset
IE-8HD Sub handset for IE-8MD
LEF-5 5 call open voice master, surface or desk mount
LEF-10 10 call open voice master, surface or desk mount
LEF-10S 10 call open voice master with All-call button, surface/ desk mount
LEF-5C 5 call open voice master, Semi-flush mount
LEF-10C 10 call open voice master, Semi-flush mount
B2
U1
U2
+
-
PS-1820UL
+
-
Wire #841806
(+/- wires doubled)
#851602:
Low capacitance 16AWG
MYW-BA-M
A1
A2
PE insulated wire
Aiphone
Wire #851602
B1
B2
Brn
Org
PS-1820UL
Do not connect +
+
-
Wire #841806
(- wires doubled)
Total 1000'
NOTE:
A separate audio intercom system is required
for proper system operation. Select the
appropriate system based on overall distance
and communication requirements.
MYW-BA-M TERMINAL DEFINITIONS:
A1 Video signal input from
A2 MY monitor/adaptor
B1 Output to
B2 sub monitors
Brn U2 input from MY monitor/adaptor
Org Output to MYH sub monitor
+ Positive 18V DC
- Negative
+
-
MYH-CU
A1
A2
B1
B2
U1
U2
+
-
Pg. 1
2. MYW-P3L with MYH-CUB and LEF-C Audio:
(Audio system not shown)
MK-DAC*
A1
A2
MK-DAC*
A1
A2
*VIDEO DOOR STATIONS:
Any Aiphone MK or MY Series video door
station can be used:
-MK-DAC: Surface mount, black
-MK-DBC: Semi-flush mount, black
-MK-DGC: Semi-flush mount, metal cover
-MY-DGV: Semi-flush mount, vandal
proof, stainless steel cover
-MK-DS/B: Surface mount, fixed camera
MYW-P3L
1A1
1A2
2A1
2A2
B1
B2
U1
U2
+
-
Max. 500'
Wire #851602
PS-1820UL
+
-
Wire #841806
(+/- wires doubled)
MYW-BA-M
A1
A2
B1
B2
Brn
Org
+
-
(- wire doubled)
NOTE:
An audio intercom system is required for
proper system operation. Select the
appropriate system based on overall
distance and communication requirements.
Wire #851602
MYH-CUB
A1
A2
B1
B2
U1
U2
PS-1820UL
Do not connect +
Wire #841806
+
-
+
-
Total 1000'
SPECIFICATIONS:
Power Source: 18V DC. Use PS-18C for every three video units, including adaptor and monitors.
Current consumption: 250 mA (standby)
Scanning lines: 525 lines
Wiring distance: MK Camera to MY-CU or MYW adaptor: Max. 330' with 18 AWG wire
MY-CU or MYW adaptor to MYW-BA-M: Max. 500' with Aiphone cables 841806 & 851602*
Max. distance from first to last MY monitor is 1000' with Aiphone cables 841806 & 851602*
* Total distance from first monitor/adaptor to farthest sub monitor cannot exceed 1000 feet.
Dimensions: 7-1/2"H x 3"W x 1-5/8"D
CAUTION
* Do not connect any AC wires to any terminal on any unit, as damage may occur. Connect only specified power source to + and - terminals.
* Do not install more or different power sources than specified for the system.
* Do not attempt to install or connect wires on the MY system while the system's power supply is plugged in.
* MY monitors and related equipment, unless specified as "weather resistant", are designed for indoor use only.
Video door stations (MK-DAC, MK-DBC, MK-DGC, MK-DS, MY-DGV) may be installed outdoors in a protected area. Do not expose
any equipment directly to rain or extreme weather conditions.
IMPORTANT
* Any other manufacturer's products installed with the system (power supply, external device, etc.) are not covered under Aiphone's warranty.
* Do not mount Aiphone equipment in the following places, as it may cause the system to malfunction:
* All intercom and video units are electronic devices, which must not be subjected to water or any other liquid.
* Severe weather conditions, such as lightning storms, may cause damage to Aiphone equipment. We recommend that power surge
protection be installed to minimize potential component level damage.
- High or extreme cold temperature areas: under direct sunlight, near equipment that varies in temperature, in front of air
conditioner, inside a refrigerated area, etc.
- Places subject to moisture or humidity extremes.
- Places subject to environmental conditions, such as dust, oil, chemicals, salt, etc.
- Install the SA-1 surge arrestor to protect the power supply from a surge.
- Additional SA-1 surge arrestors should be installed on all communication lines (one SA-1 for every two connected to master.).
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
Toll Free Technical Support:
1-800-692-0200
FAX: 1-800-832-3765
E-mail: tech-serv@aiphone.com
Pg. 2
MYW-BA-M Instr.
0703bkjs
Loading...