Aiphone MCW-S/A Instruction

Desk Mount Stand

Use with:

AX, GF, GH, JA, JF, KB, KC, and MK Systems

- INSTRUCTIONS -

The MCW-S/A is a stand that will allow you to locate an Aiphone monitor station on a desk or
tabletop. This stand has two angle settings, enabling the user to select the optimal mounting
angle for the monitor station (45° or 60°).

MOUNTING:

60° Angle45° Angle

Recommended mounting
hole position by system:

Top : Bottom:

AX GF
JA GH
KB JF
KC MK

MCW-S/A

JF-2MED on MCW-S/A

(shown at 60°)

Dimensions:
Faceplate: 4½” W x 6½” H
Base: 4½” W x 7⅞ D
Height at 45°: 5⅛”
Height at 60°: 6"

MOUNTING:

1. Attach the intercom’s mounting bracket to the MCW-S/A utilizing the appropriate set of mounting holes
(top or bottom position, see recommendations above).

2. Set the angle of the MCW-S/A by adjusting the rear support arm for either a 45° or 60° angle.

3. Lock the rear support arm into position to prevent the MCW-S/A from collapsing.

4. Feed the wires through the back of the MCW-S/A and attach to the intercom unit.

5. Mount the station onto the mounting bracket.

AX-8MV on MCW-S/A

(shown at 45°)

Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
[phone]
FAX [phone]

GH-1KD on MCW-S/A

(shown at 60°)

Toll Free Technical Support:

1-800-692-0200

E-mail [e-mail]

KB-3MRD on MCW-S/A

(shown at 60°)

MCW-S/A Instr.

1207JDPH