
1192A
® AlPHONE
LOUDSPEAKER INTERCOM SYSTEM
Model:
LEM-IL
INSTRUCTIONS
O Speaker/mic.
r?) OFF button
(on back of unit)
(D
TALK button
Communication volume control
Call tone volume control
Call tone by depressing both
TALK & OFF buttons
Cz) Door release button
MOUNTING ACCESSORIES;
(l-call master wtdoor
release button)
Jt,
I Mounting bracket
I Screw(2)(for mounting to electrical box)
I Wood SCTtV/{2)(for mounting to wall surface)
\2
* 1-call loudspeaker master with door release button & call
tone volume control.
* Simple 2-conductor wiring.
* Call a sub by either tone or voice at master.
* Desk-top or wall-mount installation.
* Handsfree remote communication at sub/door station.
FEATURES

BEFORE YOU INSTALL AND OPERATE THE EQUIPMENT
3
Prohibitions & precautions -
Installation
Do not connect any terminal on any unit to AC power lines.
I
Select the installation locations that would not be exposed to temperatrue/humidity
extremes, water, oil, dust, iron dust, flammable and chemical products, etc.
I Use DC 6V power supply specified below. Never apply DC 12V.
I It is suggested to locate a power supply within 5m/16’ from the master station.
Operations
I Be sure to depress OFF button at end of every communication.
If you forgot to depress OFF button, your master station can not be called
by tone from sub/door station.
Maintenance
I Clean your LEM equipment with a soft cloth dampened with neutral
household cleanser.
Never use lacquer thinner, benzine, etc.
I Do not splash water on door station by hose, etc.
MODEL
* Master Stati
LEM-IL
* Sub station;
LE-D
LE-DA
LE-A
DESCRIPTION
m;
l-call master with door release button
Weather-resistant sub, w/plastic cover
- do - w/stainless cover
Inside sub, desk/wall
QTY.
1 pee
1 pee
REMARKS
Wall/desk use
Wall surface-mount or
to 1-gang box
Fish-mount to 2-gang box
* Powersupp
SKK-620
PS-6D
* Door release
EL-9S
PT-1210N
y;
Power supply DC 6V(USA only)
Standard power supply
•
Door release, AC 12V, 0.35A
Bell transformer for EL-9S
1 pee
1 pee
1 pee

5 INSTALLATION
Actual terminal location;
Adjusting volumes;
Communication volume
VOLUME
CONTROL
HIGH
Call tone volume
f
LOW
D □
CHASSIS BACK VIEW
FRONT VIEW
Wall-mounting;
LEM-IL
Slide down and remove the mounting bracket on back of LEM-IL unit. Attach the mounting
bracket to single-gang box or wall with the supplied screws or wood screws.
CHASSIS BACK VIEW
LEM-IL SYSTEM;
Master station
LEM-IL
.Do not remove
this shorting link.

rt
OPERATIONS
Master station; LEM-IL
Be sure that OFF button must be depressed when not in use.
If OFF button is not depressed, sub's call-in will not be signalled by tone at master station.
1. CaUin2;
To call by tone, depress both OFF and TALK buttons simultaneously.
Call-acknowledged tone is heard softly from your station speaker.
To call by voice, depress TALK button. Control communications by TALK button operation,
depress to talk, release to listen. After communication, depress OFF button.
2. Receiving:
Sub station call-in is annunciated by mono tone.
Reply to the sub, by dperessing TALK button, and release to listen to the sub.
3. Activating door release:
After identifying a caller, depress DOOR RELEASE button. The release remains activated
while the button is being depressed.
Sub stations: LE-D, LE-DA, etc.
h CaHing;
Momentarily depress CALL button. The call-acknowledged tone can be heard softly from
sub's speaker. TTie call tone signals master while call button is being depressed. When
master replies, communicate handsfree.
2. Receiving:
When master calls, simply reply handsfree.
On LE-AN privacy sub, depress CALL button to release PRIV. button, and reply handsfree.
After communciation, depress PRIV. button.
* Power source:
* Current consumption:
* Calling:
* Communication:
* Communication output:
Wiring: 2 wires per sub(non-polarized)
* Wiring distance:
DC 6V. Use a power supply SKK-620(in USA)
or PS-6D standard except N. America.
Max. 200mA.
Master to sub: Electronic mono tone or voice
Sub to master. Electronic mono tone(w/volume control on master)
Press-to-talk at master
(w/communication volume control at master)
350mW
2 wires for door release
Diameter
Distance 120m
AWG
Distance 390' 650’ 980' 1 1570' 2360'
0.5mm
24AWG
0.65mm
200m 300m 480m 720m
22AWG
________
0.8mm 1.0mm 1.2mm
20AWGI 18 AWG 16AWG
* Dimensions(H x W x D)
& weight:
AIPHONE CO., LTD., NAGOYA, JAPAN
AIPHONE CORPORATION,
1700 130th Ave. N.E., BELLEVUE WA 98005
phone 206-455-0510 WA U.S.A.
LEM-lL-KEm92A
LEM-IL: 160 X 132 x51mm: 6-5/16" x 5-3/16" x 2"
Approx. 300g(0.66 lbs.)
©
COMMUNICATION SYSTEMS
AIPHONE
HOME, BUSINESS, INDUSTRY
Printed in Japan(E)