Aiphone LE-B2 INSTALLATION INSTRUCTIONS

LE-Bn INSTALLATION INSTRUCTIONS

(SUPPLEMENT TO THE PRODUCT INSTRUCTIONS)

LE-B2, LE-B4, LE-B6, LE-B10 Selective Call Entry Station for LEM, LEF Masters

MOUNTING INSTRUCTIONS

1. Cut a hole in the wall that is 9-1/16” X 6-1/8”. (Ensure
that a mounting depth of at least 2-11/16” is available.)

2. Pass cable through knockout holes.

Special
Order
Products

3. Secure mounting box to wall so that front of mounting
box is flush with the outside edge of the wall.

4. Connect wires to the unit. (See wiring diagram)

5. Attach the unit to mounting box using the supplied
screws.

DIRECTORY LAMP INSTALLATION:

1. Attach the lamp mounting plate as shown in the
drawing using the supplied screws. The lamp should
face the back of the mounting box and point down.

2. Connect the RED wire to “+” of the PS-12C.

3. Connect the BLACK wire to the “-” of the PS-12C.

4. Lamp is 12VDC, 1W.

(Illustration
only. Number
of wires vary.)

ENTERING TENANT’S NAME:

1. Remove the directory card cover by pressing on edge
of the card cover next to the call button.

2. Remove the directory card in the same manner.

3. Fill in the tenant’s name in the space provided.

4. Replace card and cover.

Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
[phone]
FAX [phone]

TOLL FREE TECHNICAL SUPPORT:

TOLL FREE FAX LINE:

E-MAIL: [e-mail]

[phone]
[phone]

Press here to
remove cover
and card.

LEB24610 Sup

0199bkjd