Aiphone AI-CP170 User Manual

Interface Board for Non-Aiphone Speaker and Call Button with AI-900 System

- INSTRUCTIONS -

The AI-CP170 Interface board provides the necessary interface for any standard speaker with a 25V transformer and a
Normally Open call button to be used as a remote station on the AI-900 system. Simple wire connections are provided
for easy connection. Install the small circuit board behind the remote speaker or call button. Made for indoor use only.

WIRING DIAGRAM:

* 8 Speaker with

Connector on

AI-900RS Card

Blk

Gray to

Common of

25V Transformer

Brn

Org

*Top view of

connector

*Important, When connector
is plugged into AI-900RS,
Orange should be on top

* For best acoustics, speaker must be located in the center of the room, mounted in the ceiling

Gray
Brown
Orange
Violet
Red
Black
Violet

GY BR OG VI G

AI-CP170

RD BK VI

Violet wires to call button

Transformer

Red to
1W Tap on
Transformer

Red & Gray wires to Speaker

Normally Open

Call Button

SPECIFICATIONS:

Power Source: Supplied by Main Frame (AI-900MF)
Speaker: Use standard 8 ohm speaker with 25V transformer
Call Button: Normally open momentary contact
Mounting: Conceal behind speaker or call button
Terminations: Color-coded prewired pigtails
Wiring: 3 conductor shielded, homerun from Main Frame to each speaker/call button
Wiring Distance: 2,625' w/ 22AWG, 4,265' w/ 18AWG
Dimensions (HxWxD): 1-3/8" x 15/16" x 1/2"

Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
[phone]
FAX [phone]

TOLL FREE TECHNICAL SUPPORT: [phone]

E-MAIL: [e-mail]

AI-CP170 Instr.

0309PHJS