Aiphone 13710 User Manual

AX Series

Security and Communication System

Architectural and Engineering

Specifications

Aiphone AX Series 13710 (28 13 00) - 1

Aiphone AX Series 13710 (28 13 00) - 2

Aiphone Corporation February 2007

1700 130th Avenue NE
Bellevue, Washington 98005
Toll Free [phone]
Phone [phone]
Fax [phone]
Website www.aiphone.com
E-mail [e-mail]

Product Guide Specification

Specifier Notes: This product guide specification is written according to the Construction Specifications
Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described
in The Project Resource Manual—CSI Manual of Practice, Fifth Edition.

The section must be carefully reviewed and edited by the Architect or Engineer to meet the
requirements of the project and local building code. Coordinate this section with other specification
sections and the Drawings. Delete all “Specifier Notes” after editing this section.

Section numbers are from MasterFormat 1995 Edition, with numbers from MasterFormat 2004 Edition
in parentheses. Delete version not required.

SECTION 13710 (28 13 00)

SECURITY AND COMMUNICATION SYSTEM

Specifier Notes: This section covers Aiphone Corporation “AX Series” integrated security and
communication system. Consult Aiphone Corporation for assistance in editing this section for the
specific application.

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Integrated security and communication system.

1.2 RELATED SECTIONS

Specifier Notes: List numbers and titles of sections with work directly related to this section.

A.

1.3 REFERENCES

Aiphone AX Series 13710 (28 13 00) - 3

Specifier Notes: List standards referenced in this section, complete with designations and titles. This
article does not require compliance with standards, but is merely a listing of those used.

A. ISO 9001:2000 – Quality Management Systems – Requirements.
B. TIA/EIA 568 – Commercial Building Telecommunications Cabling Standard.

1.4 SYSTEM DESCRIPTION

Specifier Notes: Edit the system description as required for the project. Consult Aiphone Corporation
for more information.

A. Components:

1. Door stations.

2. Master Stations: Connect a maximum of seven 16-call add-on selectors Model AX-16SW.

3. Central Exchange Units (CEU): Connect a maximum of 3 add-on exchange units Model
AX-320C.

4. Power supply.

5. Other External Connections:

Specifier Notes: Access control system and CCTV system may require custom software programs, not
provided by Aiphone Corporation.

a. Access control system.
b. CCTV system.
c. CO line adaptor.
d. Video output.
e. PC.

B. Capacities:

1. Door Stations: Maximum 120 stations with 1 CEU Model AX-248C and 3 add-on
exchange units Model AX-320C.

2. Master Stations:
a. Maximum 4 stations with CEU Model AX-084C.
b. Maximum 8 stations with CEU Model AX-248C.

3. Power Supply:
a. Model PS-2420UL: 24 V DC, 2 A.
b. For Audio: 1.
c. For Video: 2.

4. Number of Talk Paths: 2.

5. Number of Video Paths: 2.

6. All Call: 1, to master stations only.

7. Video Monitor: 2, same as talk paths and video paths.

8. Scan Monitor: 1.

C. Calling Master Station from Door Station and Communicating:

1. Priority Levels for Calls from Door Stations:
a. Normal.
b. Priority.

Aiphone AX Series 13710 (28 13 00) - 4

2. Press door station CALL button.

3. Calling tone rings on master station (for normal call, intermittent tremolo sound; for priority
call, rapid intermittent tremolo sound) and selector button LED for individual door station
flashes (double-flash for priority call). If door station has camera, video from door station
shall be displayed on master station monitor. Call tone continues to ring until answered or
is timed out (based on setting). You can stop calling tone by pressing OFF button.

4. If you press individual door station selector button, LED stops flashing and stays lit and
you can talk hands-free to that station. If only TALK button is pressed to answer call,
hands-free communication initiates with door station at highest priority call. Talk LED
lights when you talk and goes off as you listen to caller.

5. Press OFF button again to end communication. Call also ends automatically when set talk
limit is reached.

6. If you hold down TALK button for a minimum of 1 second, communication switches to
press-to-talk mode. Hold down TALK button to talk and release to listen to caller. You
cannot switch back from press-to-talk communication to hands-free communication.

7. If other master station presses selector button of in-use door station or in-use master
station, busy signal is heard at master station.

8. Microphone is muted while you hold down privacy button on master station while in
communication.

9. You can connect footswitch and use it the same manner as TALK button.

10. Master station can display calls up to 8 stations at the same time. If there are more than 8
incoming calls, they will be displayed in order of priority and time of call.

11. You can adjust calling tone, transmit volume, and receive volume with volume controls at
bottom of master station.

12. You can use a headset (not included in system) instead of built-in master station’s speaker
and microphone.

D. Calling Master Station from Another Master Station and Communicating:

1. Press individual selector button of master station.

2. Pre-tone sounds both master stations and starts hands-free communication. Talk LED
lights when you talk and goes off as you listen to caller.

3. Press OFF button to end communication. You can end call from either master station.
Call also ends automatically when set communication end time is reached.

4. If called master station has privacy mode set (privacy settings button is lit), communication
is only 1-way, from calling master station to called master station, and nothing can be
heard from called master side. Press TALK button on called master station for a minimum
of 1 second. Press-to-talk communication starts. Hold down TALK button to talk and
release to listen to caller.

5. You cannot call master station while it is communicating. You will hear a busy signal.

E. Privacy (PRIV) Function:

1. To make master into privacy mode (prevent monitoring from other stations), press privacy
button (LED lights up).

2. To cancel privacy mode, press privacy button again (LED goes out).

3. Privacy setting cannot be changed while in communication.

F. CO Line Cal l from Door Station and Communication:

1. If CALL button is pressed at door station while CO Transfer feature is set (with CO
Transfer button lit), call tone rings on master station (for normal call, intermittent tremolo
sound; for priority call, rapid intermittent tremolo sound) and selector button LED for
individual door station flashes (double-flash for priority call). At same time, telephone call
is placed to programmed CO line number.

Aiphone AX Series 13710 (28 13 00) - 5

2. You can communicate with door station from telephone.

3. You can end communication at telephone. Communication also ends automatically when
set talk time limit is reached. About 10 seconds before end of call, you will hear alarm
sound on telephone.

4. Maximum duration for CO line call is 300 seconds, even if call timer is set to “Infinite”.

5. Using this function requires Viking Electronics, Inc. “K-1900-5 Hot-Line Pulse Dialer”.

6. If there are multiple calls, call from door station with highest call priority is transferred.

7. Answering at any master station during CO transfer feature will stop CO transfer.

8. There are no functions, such as for door release and dial-in, from telephone.

G. All Call (Normal Master Station Paging):

1. When you press ALL CALL button on master station, all individual master station selector
button LEDs flash slowly. You can clear undesired master station from All Call by
pressing individual master station selector button with flashing LED, which will turn off
LED. Pressing that button again makes that master station part of All Call again and
makes LED flash.

2. If you press TALK button, send LED lights up and all individual master station selector
buttons stop flashing and stay lit. Pre-tone sounds on target master stations and they can
be talked to. At this time, you cannot hear audio from other master stations.

3. Press OFF button to end. You can end call for individual master station by pressing its
OFF button.

4. All Call announcements do not go to master stations that are in use.

5. During All Call, if you press individual master station selector button on calling master
station or press individual master station selector button or TALK button on 1 of the other
master stations, communications switch to hands-free between master stations.

6. There is no function for hands-free reply from called master station during All Call mode.

7. If you press down ALL CALL button but do not start talking within 30 seconds, system
goes back to standby mode. You can also return to standby by pressing OFF button.

H. All Call (Priority Master Station Paging):

1. When you press ALL CALL button on master station, all individual master station selector
button LEDs flash slowly.

2. If you press ALL CALL button again, flash rate increases. You can clear undesired master
station from All Call by pressing individual master station selector button with flashing
LED, which will turn off LED. Pressing that button again makes that master station part of
All Call again and makes LED flash.

3. If you press TALK button, TALK LED lights up and all individual master station selector
buttons stop flashing and stay lit. Pre-tone sounds on all master stations and all can be
called. At this time, you cannot hear audio from other master stations.

4. Press OFF button to end. You can end call for individual master station by pressing its
OFF button.

5. Communication of master station being used is cancelled and All Call takes priority.
Before communication of master station being used is cancelled, you hear cancel warning
sound.

6. During All Call, if you press an individual master station selector button on calling master
station or press individual master station selector button or TALK button on one of the
other master stations, communications switch to hands-free between those two master
stations.

7. There is no function for talk back from master station receiving an All Call announcement.

8. If you press down ALL CALL button but do not start talking within 30 seconds, system
goes back to standby mode. You can also return to standby by pressing OFF button.

Aiphone AX Series 13710 (28 13 00) - 6