Entrance Station (Unit Type)/Entrance Station (Integrated Type)/
Security Guard Station
Entrance Station (Unit type)
2
3
1
D
A
F
C
B
E
5
4
6
M
G
J
I
L
O
K
H
N
W
8
9
7
P
Z
S
T
V
Q
X
U
Y
R
0
Entrance Station
(Integrated type)
2
3
1
D
A
F
C
B
E
5
4
6
M
G
J
I
L
O
K
H
N
8
9
7
W
P
Z
S
T
Q
V
X
U
Y
R
0
Security guard station
OPERATION MANUAL
PRECAUTIONS
General Prohibitions
Prohibition to Dismantle the Unit
WARNING
(Negligence could result in death or serious injury.)
1. Do not dismantle or alter the unit. Fire or electric shock could result.
2. Do not connect non-specified power sources to the +, - terminals. Also, do not install
two power supplies in parallel to a single input. Fire, damage, or system malfunction
could result.
3. Keep the unit away from water or any other liquid. Fire or electric shock could result.
4. Do not put any metal or paper into the unit through the openings. Fire, electric shock,
or unit trouble could result.
5. High voltage is present internally. Do not open the case. Electric shock could result.
6. Do not use a power supply with a voltage other than the specified. Fire or electric shock
could result.
CAUTION
(Negligence could result in injury to people or damage to
1. Do not place (install) the unit in locations subject to frequent vibration or impact. Injury or damage could result if the unit falls.
2. Do not press on the LCD or subject it to high impact. The LCD glass could break which
could result in an injury.
3. If the LCD is punctured, do not allow skin contact with the liquid crystal inside. Inflammation could result.
* If liquid crystal is ingested, immediately gargle with water and seek medical attention.
* If contact with the eyes or skin occurs, clean with pure water for at least 15 minutes and
seek medical attention.
4. Do not install the unit in any of the following locations. Fire, electric shock, or unit
trouble could result.
* Places under direct sunlight or places near heating equipment that varies in tempera-
ture.
* Places subject to dust, oil, chemicals, etc.
* Places subject to moisture and humidity extremes, such as bathrooms, cellars, green-
houses, etc.
* Places where the temperature is quite low, s
of an air conditioner.
* Places subject to steam or smoke (near heating or cooking surfaces).
* Where noise generating devices such as dimmer switches or inverter electrical appli-
ances are close by.
5. Do not put anything on or cover the unit with cloth, etc. Fire or unit trouble could result.
6. For power supply, use Aiphone power supply model or model specified for use with
system. If non-specified product is used, fire or malfunction could result.
7. When performing call tests or checking the chime volume or call volume, make sure the
handset is placed on the main unit. Failure to do so may result in injury to the ears.
property.)
uch as inside a refrigerated area or in front
Prohibition on Subjecting the Unit to Water
General Precautions
General Precautions
1. The unit turns inoperative during power failure.
2. In areas where broadcasting station antennas are close by, intercom system may be affected by radio frequency interference.
3. Keep the unit more than
4. Be careful about where the unit is used, as use of computers, televisions, or radios near the
unit may affect transmission from the unit or cause unwanted noise.
5. When wall-mounted, the top of the unit may darken. This does not indicate a malfunction.
6. If the unit is down or does not operate properly, turn off the unit's power supply.
7. The unit case may becom
8. If the surface of an entrance station freezes during wintertime, the picture may become
difficult to see or the buttons may not move, but this is not a malfunction.
9. Security guard stations are for indoor use only. Do not use outdoors.
10. If a strong light shines on the main unit screen, the picture will turn white or only silhouettes will be
11. As to other manufacturer's devices (such as sensor, detectors, door releases) used with this
system, comply with the Specifications and Warranty conditions that the manufacturers or
venders present.
12. If a cellular phone is used close by, the unit may malfunction.
13. The LCD panel is manufactured with very high precision techniques. Please be awa
this in advance.
14. Talk within 50 cm (20") or less from the unit. If you stand too far away, it may be difficult
for the other person to hear the communication.
15. If there are loud noises around the unit (such as music playing or children crying), the
sound may break up and be difficult to hear.
16. During communication, if you speak before the other person has finished talking, your
voice
until the other person has finished before speaking.
17. The outline of video images displayed by an entrance station may differ from that of the
actual person(s) or background, but this is not a malfunction.
18. When putting a hearing aid into T-mode and approaching the unit, the intercom system
may be affected by radio
ronment.
19. The sensor of an entrance station (integrated type) may activate due to moving shadows or
moving tree branches, etc. and cause a message to display, but this is not a malfunction.
visible. But this is not a unit malfunction.
may not come through clearly. Communication will proceed smoothly if you wait
1 m away from radios or TV sets.
e warm with use, but this is not a unit malfunction.
re of
frequency interference etc., depending on the installation envi-
Forward search button
(or move cursor to the right)
Cancel button
(or set and return)
Call button
(or set and move forward)
Sensor
(If the sensor detects an object, the display will be
illuminated.)
Hearing aid T-mode compatibility symbol*1
Forward search button
(or move cursor to the right)
Call button
(or set and
2
3
D
A
F
C
B
E
5
6
M
J
L
O
K
N
8
9
W
Z
T
V
X
U
Y
0
This button is not used.
Light button
Door release button
move forward)
Off hook LED (orange)
Call tone volume switch (low, medium, high)
USB terminal (B type)
*1: This unit emits an electromagnetic field for hearing aids with
T-mode to produce clear audio.
- 5 -
2
OPERATIONS (ENTRANCE STATION)
Calling residential stations2-1
● Calling with the switch module
Press the call button for the residence that you want to call.
The door call-in indicator will light up and you will hear a call tone. Audio guidance will be heard depending on the settings.
GT-SW
GT-DA-L
● Calling with the name scrolling module or GT-DMV/GT-DM.
Display the residential station to be called.
(1) Display using scrolling to search
1 In the standby mode, use the
Use the and buttons to search for the desired residential station.
• Depending on the settings, the resident name may only display.
• The display order may be according to room number or name.
GT-NS-V/GT-NSGT-DMV/GT-DM
WELCOME
and buttons to display the room number and resident name.
WELCOME
2 Press the button.
101
SMITH
NAME SCROLL
ROOM NO. 101
SMITH
:CANCEL
:CALL
(2) Display using room number to search
1 In the standby mode, enter the room number using [0] to [9] on the 10 key to display the room number and resident name.
• Depending on the settings, the resident name may only display.
GT-DMV/GT-DMGT-NS-V/GT-NS
WELCOME
2 Press the
101
SMITH
button.
WELCOME
NAME SCROLL
ROOM NO. 101
SMITH
:CALL
:CANCEL
Room number (1 to 6 digits)
0
11
* If there is no relevant room number, the message below is displayed.
GT-NS-V/GT-NSGT-DMV/GT-DM
NO ENTRY
< NO ENTRY >
* When the trunk of the residential station that has been called
is in use, the in use LED lights up to indicate that the
residential station cannot be used.
- 6 -
(3) Display by using letters to search
1 In the standby mode, press [
GT-NS-V/GT-NSGT-DMV/GT-DM
WELCOME
] on the 10 key.
WELCOME
2 When "ENTER A LETTER" displays, use the 10 key to enter letters.
ENTER A LETTER
ENTER A LETTER
7
7
P
P
S
Q
R
R
...
S
S
Q
R
S
Resident name (ex. "SMITH")
:CALL
:CANCEL
7
7
P
P
S
Q
Q
R
3 The room number and name for the resident whose initial corresponds to the entered letter will display.
• Depending on the settings, the resident name may only display.
101
SMITH
ENTER A LETTER
ROOM NO. 101
SMITH
S
:CALL
:CANCEL
* If there is no relevant resident name, the message below is displayed.
GT-NS-V/GT-NSGT-DMV/GT-DM
NO ENTRY : S
ENTER A LETTER
NOTES: 1. Pressing the or button for approximately 2 seconds will dis-
play the resident names in succession.
2. If both room number 111 and 1111 exist, the resident name for
room 111 will be displayed when 1, 1, 1 is entered, and the resident
name for room 1111 will be displayed if 1 is entered one more
time.
3. Stations can be made to display in order by room number using the
menu screen settings. (The order starts with the lowest digit from 0
to 9 and then the order goes by letter.) In cases where room numbers such as A101, A201, A901, A1001, and B101 exist, the order
starts with the lowest digit and goes in the order A101, A201, A901,
B101, A1001.
Call the residential station after it is displayed.
4 When the desired residential station is displayed, press the
button. The door call-in indicator will light up and you will hear a call tone.
Audio guidance will be heard depending on the settings.
NO ENTRY
S
:CALL
:CANCEL
GT-NS-V/GT-NSGT-DA-L
CALLING
SMITH
GT-DMV/GT-DM
CALLING
ROOM NO. 101
SMITH
:CANCEL
- 7 -
5 When the other person answers, communication starts and the talk indicator lights up.
Audio guidance will be heard depending on the
GT-DMV/GT-DM
IN COMMUNICATION
IN COMMUNICATION
ROOM NO. 101
SMITH
:CANCEL
settings.
GT-DA-LGT-NS-V/GT-NS
6 When the door is released, the door release indicator lights up.
Audio guidance will be heard depending on the settings.
GT-DA-LGT-NS-V/GT-NSGT-DMV/GT-DM
DOOR OPEN
IN COMMUNICATION
ROOM NO. 101
SMITH
:CANCEL
Calling security guard stations2-2
Select the security guard station and press the button. You will hear a call tone. Audio guidance will be heard depending on the settings.
GT-SW
GT-DA-L
GT-NS-V/GT-NS
1
2
A
3
C
D
B
E
4
G
5
I
J
H
6
L
M
K
N
P
7
8
S
Q
T
W
R
9
V
U
X
Y
0
F
O
Z
GT-DMV/GT-DM
NAME SCROLL
ROOM NO. 001
SECURITY GUARD
:CALL
:CANCEL
Door release2-3
1 In the standby mode, enter the access code (4 to 6 digits) after entering [#] on the 10 key. Audio guidance will be heard depending on the settings.
GT-DMV/GT-DMGT-NS-V/GT-NS
WELCOME
2 The door is released.
DOOR OPEN
WELCOME
DOOR OPEN
4
5
6
7
P
G
M
J
I
L
H
K
S
Q
O
N
R
Access code (ex. "4567")
* If the access code is incorrect, the message below is displayed.
GT-DMV/GT-DMGT-NS-V/GT-NS
DENIED
< DENIED >
- 8 -
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.